Zobrazeno 1 - 10
of 26
pro vyhledávání: '"Hidehito WATANABE"'
Autor:
Masato OKADA, Yoshito HIRATA, Hidehito WATANABE, Masahide WATANABE, Makoto NIKAWA, Naoto KANEDA
Publikováno v:
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol 18, Iss 1, Pp JAMDSM0003-JAMDSM0003 (2024)
The drilling characteristics of alumina ceramics during through-hole drilling with a diamond-coated carbide drill were investigated experimentally. The drilling characteristics were evaluated by cutting edge behavior, cutting force (thrust force and
Externí odkaz:
https://doaj.org/article/e7b794bbc9ca4a16bf6e4bbc6493245e
Publikováno v:
Journal of Manufacturing Processes. 89:410-429
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3a9993188979716188241e890ee79d8a
https://doi.org/10.1016/j.jmapro.2023.01.055
https://doi.org/10.1016/j.jmapro.2023.01.055
Publikováno v:
Nihon Kikai Gakkai ronbunshu, Vol 83, Iss 853, Pp 16-00374-16-00374 (2017)
Recently, the diameter of through hole on printed circuit board (PCB) has become smaller with downsizing of electric devices. However, the drilling small diameter through hole includes some problems such as hole position accuracy and hole bending. En
Externí odkaz:
https://doaj.org/article/ea967f1f1f72400e9eafcbc12ea6f6b5
Autor:
Masaaki Otsu, Atsuyuki Kondo, Masato Okada, Masayoshi Shinya, Hidehito Watanabe, Takuya Miura, Toshihiko Sasaki
Publikováno v:
Journal of Manufacturing Processes. 61:83-99
This study addresses the finished surface quality of cemented tungsten carbide obtained via direct cutting with a diamond-coated carbide end mill under ultrasmall feed rates. The surface appearance, composition distribution, profile, roughness, resid
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::57610da9ea7fd9db7b8c7f2b1ae66d45
https://doi.org/10.1016/j.jmapro.2020.11.004
https://doi.org/10.1016/j.jmapro.2020.11.004
Publikováno v:
Nihon Kikai Gakkai ronbunshu, Vol 82, Iss 834, Pp 15-00463-15-00463 (2016)
In recent years, needs for micro drilling are increasing, accompanying the development of higher wiring density of printed circuit board (PCB). When drilling PCB for the purpose of making the electric through holes, it has been said that the drill br
Externí odkaz:
https://doaj.org/article/173a6c5177904f59b05200ecc97c2ca5
Publikováno v:
Journal of the Japan Society for Precision Engineering. 85:866-872
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7d8e80dad8ed5c74ba485c1f93acef6c
https://doi.org/10.2493/jjspe.85.866
https://doi.org/10.2493/jjspe.85.866
Publikováno v:
International Journal of Automation Technology. 13:58-66
This study investigates the cutting characteristics of direct milling of cemented tungsten carbides performed using a diamond-coated carbide end mill. The diamond-coated carbide end mills have cutting edges that are both treated and untreated, and th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6d3ae3f9df7721ec09f2e69fbb5d6bd8
https://doi.org/10.20965/ijat.2019.p0058
https://doi.org/10.20965/ijat.2019.p0058
Publikováno v:
Procedia CIRP. 77:114-117
This study investigates the finished surface of cemented carbide obtained by direct cutting with a diamond-coated carbide end mill. Excellent cutting performance in the direct cutting of cemented carbide can be achieved using a diamond-coated carbide
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7dd00fd5b28648bac69296c981dfa418
https://doi.org/10.1016/j.procir.2018.08.234
https://doi.org/10.1016/j.procir.2018.08.234
Autor:
Akihiro Yoshida, Masato Okada, Naoki Asakawa, Tatsuaki Furumoto, Hidehito Watanabe, Masaaki Otsu
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 86:1827-1839
This paper addresses the cutting mechanisms of cemented carbide using a diamond-coated carbide end mill at ultrasmall feed rates. The tool wear behavior, cutting force, and form and surface integrity of the machined groove were experimentally investi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::70b37c167c3cb8e9d0e096edce9a2edb
https://doi.org/10.1007/s00170-015-8324-3
https://doi.org/10.1007/s00170-015-8324-3
Publikováno v:
The Proceedings of The Manufacturing & Machine Tool Conference. :B14
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cff7623e68fa86ed74c341d130a09242
https://doi.org/10.1299/jsmemmt.2018.12.b14
https://doi.org/10.1299/jsmemmt.2018.12.b14