Zobrazeno 1 - 10
of 518
pro vyhledávání: '"Heating performance"'
Autor:
Jiaen Wang, Wei Ming, Longfu Chen, Tianliang Song, Moxi Yele, Hao Zhang, Long Yang, Gegen Sarula, Benliang Liang, Luting Yan, Guangsheng Wang
Publikováno v:
Nano-Micro Letters, Vol 17, Iss 1, Pp 1-14 (2024)
Highlights The introduction of MoS2 generates a “kill three birds with one stone” effect to the original binary MXene/ANF system: lubrication toughening mechanical performance; reduction in secondary reflection pollution of electromagnetic wave;
Externí odkaz:
https://doaj.org/article/4ba9bbff4b7a4fccbfaed90e1a2e06ce
Publikováno v:
Energy and Built Environment, Vol 5, Iss 5, Pp 719-726 (2024)
Frosting is a common phenomenon of the ASHP under the heating mode in winter, and the outdoor air flow rate flowing through the evaporator of the ASHP was always thought to be a major contributor. In order to validate its contribution, effects of out
Externí odkaz:
https://doaj.org/article/bf2c4670be5e4a90a2e386c7d7bebd1e
Autor:
Francesca Aliberti, Andrea Sorrentino, Barbara Palmieri, Luigi Vertuccio, Giuseppe De Tommaso, Roberto Pantani, Liberata Guadagno, Alfonso Martone
Publikováno v:
Composites Part C: Open Access, Vol 15, Iss , Pp 100527- (2024)
This paper proposes a new strategy for designing a 3D-printed heater that can overcome some criticalities of current commercial heater devices for application in the transport and energy sectors. A semiconductive nanocomposite material, acrylonitrile
Externí odkaz:
https://doaj.org/article/d2d23649de60452da985fad294c12d48
Autor:
Zhai, Panpan a, b, c, Li, Jinping a, b, c, ⁎, Lei, Tingzhou a, b, c, Li, Rui a, b, c, Novakovic, Vojislav d
Publikováno v:
In Renewable Energy December 2024 237 Part A
Autor:
Suhyun Lee
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-13 (2024)
Abstract This study presents the development of conductive polymer-textile composites with outstanding electric heating properties achieved through the in-situ polymerization of polypyrrole on wool-felt fabrics, renowned for their superior thermal in
Externí odkaz:
https://doaj.org/article/55ffab26f28c40b49434085ac3b85526
Publikováno v:
Buildings, Vol 14, Iss 8, p 2410 (2024)
Air-source heat pumps (ASHPs), as an active device, are widely used in building heating and cooling processes. However, in severe cold regions, they face reduced heating efficiency and frosting problems in winter. This paper proposes a new heating so
Externí odkaz:
https://doaj.org/article/126581d4b88a49c1a195f5d684aeb5b1
Publikováno v:
Buildings, Vol 14, Iss 5, p 1297 (2024)
It is crucial to consider structural design issues in Trombe wall (T-wall) buildings to promote more suitable indoor climates and thermal comfort standards. Therefore, the present study examined the impact of two different T-wall designs and six diff
Externí odkaz:
https://doaj.org/article/f85b2cb704a14b659666a9b1ea02930e
Publikováno v:
Heliyon, Vol 10, Iss 1, Pp e24063- (2024)
The thermoelectric module has high potential as a compact electrothermal actuator in the generation of cooling/heating effects without any moving part. However, one difficulty of the design is that the fundamental principles of optimal cooling/heatin
Externí odkaz:
https://doaj.org/article/0f2975f21e054e84afccfbd82db902a8
Publikováno v:
Energy Conversion and Management: X, Vol 20, Iss , Pp 100406- (2023)
In HSCW (Hot Summer and Cold Winter) climate zone of China, the building heat load is usually less than the cooling load which caused the problem of thermal accumulation of underground soil to damaged the COP of the heat pump system. PV/T-GCHPs (Phot
Externí odkaz:
https://doaj.org/article/abc81da3e8394c75bc0100229e8480d8
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.