Zobrazeno 1 - 10
of 11
pro vyhledávání: '"Hatice VAROL ÖZKAVAK"'
Publikováno v:
İmalat Teknolojileri ve Uygulamaları. 4:25-36
Additive manufacturing is a manufacturing method that includes systems that produce using many different methods. The most widely used and accessible methods of additive manufacturing can be listed as Fused Deposition Modeling (FDM), Selective Laser
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::56379dba6f411f3ecf008a6a168f3dff
https://doi.org/10.52795/mateca.1265509
https://doi.org/10.52795/mateca.1265509
Autor:
Hatice Varol Özkavak
Publikováno v:
Russian Journal of Non-Ferrous Metals. 63:560-572
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::deb6f4dfe63a720be6849c351d761ac8
https://doi.org/10.3103/s1067821222050078
https://doi.org/10.3103/s1067821222050078
Publikováno v:
Volume: 6, Issue: 1 97-102
International Journal of Innovative Engineering Applications
International Journal of Innovative Engineering Applications
In this study, TiO2 ceramic oxide film with good passivity, low conductivity and good tribological properties was coated on stainless steel (AISI 304) material by sol gel spin coating method. The effect of annealing temperature and time on the struct
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::99c4f6c5d07b438c13e2698fea4c90b2
https://doi.org/10.46460/ijiea.1070575
https://doi.org/10.46460/ijiea.1070575
Publikováno v:
The Journal of Strain Analysis for Engineering Design. 57:556-564
Expanding suitable severe plastic deformation processes seems essential to design lightweight wire-formed materials for emerging demands. In this regard, 6063 aluminum alloy in the form of wire was processed successfully by polyurethane rubber assist
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::7d1e2f9dfbecc17a5775f313bf5fd94a
https://doi.org/10.1177/03093247211045605
https://doi.org/10.1177/03093247211045605
Publikováno v:
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 11:1444-1454
The aim of this study was to investigate the effects of process parameters on tensile strength for PLA specimens produced by fused deposition modeling (FDM). For this purpose, two different density rates (20% and 100%), printing speeds (100 and 130 m
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::59d640863223bee4cb16104a4bb1692d
https://doi.org/10.21597/jist.772977
https://doi.org/10.21597/jist.772977
Publikováno v:
Mühendislik Bilimleri ve Tasarım Dergisi. 9:209-216
Çalışmada eriyik yığma modelleme (FDM) yöntemi ile 3B yazıcı kullanarak üretilen PLA numunelerin mekanik özelliklerden olan çekme dayanımına işlem parametrelerinin etkisi belirlenmesi amaçlanmıştır. Bu amaçla çalışmada işlem pa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cd506ccbbf49c59c484fa2840aafb6f3
https://doi.org/10.21923/jesd.750264
https://doi.org/10.21923/jesd.750264
Autor:
Serdar MERCAN, Hatice VAROL ÖZKAVAK
Publikováno v:
Volume: 37, Issue: 4 2309-2322
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Farklı malzeme türlerinin birleştirilerek kullanılmasının zorunlu olduğu birçok endüstriyel uygulama bulunmaktadır. Ancak kaynak, döküm, yapıştırma gibi diğer birleştirme yöntemleri ile bu her zaman mümkün olmamakta ya da çeşitl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4d003717ee6d99a592c947a287a73d18
https://hdl.handle.net/20.500.12418/13915
https://hdl.handle.net/20.500.12418/13915
This study aimed to investigate the gamma-ray attenuation properties of AISI 316 stainless steel both experimentally and theoretically by doping different ratios of boron carbide. In the experimental measurements, a gamma spectroscopy system with a N
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::30ecb38fe2b36cb69ff549396f573542
http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/94404
http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/94404
Nickel-based alloys have good mechanical properties along with excellent corrosion and oxidation resistances. Inconel 718, which is in the nickel-based alloy group, has excellent fatigue strength, corrosion resistance, high temperature resistance, an
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::141da2db65391b2bba8cd2d3b96ee634
http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/91155
http://acikerisim.sdu.edu.tr/xmlui/handle/123456789/91155
Autor:
Ceren Gode, Ren-jie Fan, Mahmoud Ebrahimi, Mahmoud Shamsborhan, Hatice Varol Özkavak, Shokouh Attarilar
The use of a constrained groove pressing (CGP) method to plastically deform AA6063 aluminum alloy led to the improved surface properties. It was found that hardness magnitude is dramatically improved and its uniformity is considerably decreased after
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6506c2225dedd2e56cf652c2aaecf5df
https://hdl.handle.net/11499/37104
https://hdl.handle.net/11499/37104