Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Hassanen JABER"'
Autor:
Hassanen Jaber, Mohanad H. Mousa, Awais Qadir, Ján Dusza, László Tóth, Péter Pinke, Tünde Kovács
Publikováno v:
Open Ceramics, Vol 20, Iss , Pp 100701- (2024)
This study investigates the thermal stability and structural changes of AB-type carbonate-hydroxyapatite (AB-type CHA) prepared from heat-treated bovine bone occurring during calcination at 1000, 1100, 1200, and 1300 °C. The structural phase changes
Externí odkaz:
https://doaj.org/article/e2359e29e5eb4aea8084d0aef1b8e635
Publikováno v:
European Journal of Materials Science and Engineering, Vol 8, Iss 4, Pp 249-256 (2023)
This research addresses the metallurgical and mechanical response during the annealing of Ti6Al4V parts fabricated by selective laser melting. The as-manufactured Ti6Al4V exhibited a very fine α´ martensitic structure with low ductility of less tha
Externí odkaz:
https://doaj.org/article/94a00c76d206415b9d8e5d3707f42df3
Publikováno v:
European Journal of Materials Science and Engineering, Vol 4, Iss 2, Pp 92-100 (2019)
The effects of water/TiO2 Nano-fluid quenching media on microstructure and properties of CK35 steel were analyzed by optical microscopy, X-ray diffraction, Vickers hardness, and tensile tests. The results show that the microstructure of the CK35 stee
Externí odkaz:
https://doaj.org/article/b0d9c21915284db5990769de03eaa8c3
Publikováno v:
Metals, Vol 11, Iss 8, p 1295 (2021)
In this work, selective laser melting of Ti6Al4V (Ti64) and 2 wt.% hydroxyapatite (HA) composites was performed with the purpose of osseointegration enhancement and biological fixation between implants and bone tissue. The microstructural evolution a
Externí odkaz:
https://doaj.org/article/dd46da0af6ed45418a2147c72956e26c
Publikováno v:
Journal of Hunan University Natural Sciences. 49:185-191
Ultrasonic welding is a rapid process for thin sheet joining. The authors wanted to show the aluminum-copper dissimilar joining by the ultrasonic welding process in this work. Ultrasonic welding is a suitable and straightforward process to establish
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dfe9d064d45c167857e431ec9ca84908
https://doi.org/10.55463/issn.1674-2974.49.3.20
https://doi.org/10.55463/issn.1674-2974.49.3.20
Publikováno v:
Materials; Volume 16; Issue 11; Pages: 3989
This work aimed to comprehensively evaluate the influence of different surface modifications on the surface roughness of Ti6Al4V alloys produced by selective laser melting (SLM), casting and wrought. The Ti6Al4V surface was treated using blasting wit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a427b3d1a52a861790aeb22d182a93d3
https://doi.org/10.3390/ma16113989
https://doi.org/10.3390/ma16113989
Publikováno v:
Materials; Volume 15; Issue 5; Pages: 1978
Ti6Al4V (Ti64) alloys manufactured by selective laser melting (SLM) are well known for their susceptibility to failure at a low ductility of less than 10% due to the formation of an (α′) martensitic structure. Annealing and solution treatments as
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::58317e9700dbd7202d0d7597bc36a886
Publikováno v:
Journal of the Australian Ceramic Society. 54:1-10
This study aims to synthesize and characterize hydroxyapatite (HAp) bio-ceramic powder. Calcination treatment was applied to produce the hydroxyapatite powders from Camelus bone as an eco-friendly and inexpensive source. X-ray diffraction (XRD), Four
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::005ae5727289d9695fb05a788ac863ed
https://doi.org/10.1007/s41779-017-0120-0
https://doi.org/10.1007/s41779-017-0120-0
Publikováno v:
Ironmaking & Steelmaking. 44:699-706
The paper aims at investigating the microstructure, failure mode transition, peak load and energy absorption of DP600 dual phase steel during the tensile-shear test. It was found that the welding current has profound effect on the load–displacement
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2e50aabac87f3014257895c8f22a2ab1
https://doi.org/10.1080/03019233.2016.1229880
https://doi.org/10.1080/03019233.2016.1229880
Autor:
Hassanen Jaber, Tünde Kovács
Publikováno v:
Lecture Notes in Mechanical Engineering ISBN: 9783319756769
Metallurgical characterization, failure mode transition and mechanical properties in dissimilar resistance spot welds of dual phase steel (DP600) and low carbon steel (MSZ EN 10130) are analyzed. It was found that the fusion zone microstructure conta
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1a467d8d854c427c3b8b56a1eb024398
https://doi.org/10.1007/978-3-319-75677-6_60
https://doi.org/10.1007/978-3-319-75677-6_60
