Zobrazeno 1 - 10
of 85
pro vyhledávání: '"Hassan M. Soliman"'
Autor:
Weicheng Wu, Hassan M. Soliman
Publikováno v:
Thermal Science, Vol 25, Iss 5 Part A, Pp 3479-3491 (2021)
This paper deals with longitudinal rectangular fin arrays used in plate-fin heat exchangers. The temperature distribution and rate of heat transfer were obtained using 1-D and 2-D solutions. The ranges of independent parameters within which the 1-D s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c2a3419a38df609014ddee1f67d1d24e
http://www.doiserbia.nb.rs/img/doi/0354-9836/2021/0354-98362000213W.pdf
http://www.doiserbia.nb.rs/img/doi/0354-9836/2021/0354-98362000213W.pdf
Publikováno v:
European Journal of Mechanics - B/Fluids. 84:507-516
This work studied the capability of a commercial CFD code in modelling two-phase flow from a header through two branches. The geometry considered in this study consists of a rectangular tank with two horizontal outlet branches of the same diameter d
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a7db8fc5b4c2a84ce3b6faf426141a07
https://doi.org/10.1016/j.euromechflu.2020.07.011
https://doi.org/10.1016/j.euromechflu.2020.07.011
Autor:
Hassan M. Soliman, Samina Noor
Publikováno v:
International Journal of Mechanical Engineering and Robotics Research. :333-339
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ef18f255d6db04cbc4129a2bf6cf31ff
https://doi.org/10.18178/ijmerr.8.3.333-339
https://doi.org/10.18178/ijmerr.8.3.333-339
Autor:
Hassan M. Soliman, Mohamed A. Mohamed
Publikováno v:
Experimental Thermal and Fluid Science. 131:110527
The main objective of this investigation was to design and test a simple device capable of gas-liquid separation over a wide range of inlet conditions. A novel system of combined impacting tee junctions was designed and built for this purpose. The sy
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1677b171aee5dee9d8235acfd0a1dccf
https://doi.org/10.1016/j.expthermflusci.2021.110527
https://doi.org/10.1016/j.expthermflusci.2021.110527
Autor:
Hassan M. Soliman, André Marchildon
Publikováno v:
Heat Transfer Engineering. 40:914-923
This paper deals with constant-area, longitudinal fins with rectangular and circular cross-sections for the condition of prescribed tip temperature. For these fin geometries, the optimum aspect rat...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b55e29db16e71da3d55affbe335332b8
https://doi.org/10.1080/01457632.2018.1446872
https://doi.org/10.1080/01457632.2018.1446872
Publikováno v:
International Journal of Multiphase Flow. 97:134-146
The main objective of this study was to obtain new experimental data for conditions not previously tested for discharging two-phase flow through two 6.35 mm diameter branches with centerlines falling in an inclined plane. The present results are rele
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::11fa24438897c9f546f7162c29d75d4b
https://doi.org/10.1016/j.ijmultiphaseflow.2017.08.005
https://doi.org/10.1016/j.ijmultiphaseflow.2017.08.005
Publikováno v:
International Communications in Heat and Mass Transfer. 81:141-148
An analytical solution is derived for the film thickness for simplified steady-state governing equations of laminar film condensation from laminar pure vapours flowing downward in vertical tubes. This approach yields an accurate, approximate closed-f
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::059ceb3df911cc8448b531a7d1422221
https://doi.org/10.1016/j.icheatmasstransfer.2016.12.012
https://doi.org/10.1016/j.icheatmasstransfer.2016.12.012
Publikováno v:
International Journal of Multiphase Flow. 87:175-183
A numerical analysis using a commercial CFD code, ANSYS CFX, was used to model two-phase flow discharging from a stratified region through a small branch of circular cross-section. The purpose of this study is to assess the capability of the code in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::309365eb1e7ca9e520396d9997b04148
https://doi.org/10.1016/j.ijmultiphaseflow.2016.09.009
https://doi.org/10.1016/j.ijmultiphaseflow.2016.09.009
Pressure drop for two-phase mixtures combining in a tee junction with wavy flow in the combined side
Autor:
Hassan M. Soliman, G. Joyce
Publikováno v:
Experimental Thermal and Fluid Science. 70:307-315
The pressure losses of air–water mixtures passing through a horizontal, combining tee junction with a pipe diameter of 37.8 mm were experimentally studied with a focus on conditions that resulted in wavy outlet flows. The test matrix independently
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fc4f6daffb74f94564e0a177ddfcba57
https://doi.org/10.1016/j.expthermflusci.2015.09.024
https://doi.org/10.1016/j.expthermflusci.2015.09.024
Publikováno v:
International Heat Transfer Conference 16.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::db89d9995795c72959da5bdc2f0d74c8
https://doi.org/10.1615/ihtc16.mpf.022818
https://doi.org/10.1615/ihtc16.mpf.022818