Effect of flow rate, draw solution concentration and temperature on the performance of TFC FO membrane, and the potential use of ro reject brine as a draw solution in FO–RO hybrid systems

Autor: Akther N, Daer S, Hasan SW

© 2018 Desalination Publications. All rights reserved. The main objective of this research study was to investigate the effect of feed and draw solution flow rate, draw solution concentration (2.5–7.7 wt% NaCl) and draw solution temperature (23°C

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=od_______363::df672e8b9578a6a331d78f23206115b1
https://hdl.handle.net/10453/143913

A critical review on recent polymeric and nano-enhanced membranes for reverse osmosis

Autor: Giwa A, Akther N, Dufour V, Hasan SW

© 2016 The Royal Society of Chemistry. In this paper, current and recent advances in polymeric and nano-enhanced membrane development for reverse osmosis have been reported in terms of membrane performance and fouling. Graphene, zeolites, carbon nan

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=od_______363::a7795152279fee29f54460f8aa9bc1fe
https://hdl.handle.net/10453/143909

Wind and Geothermal Energy in Desalination: A Short Review on Progress and Sustainable Commercial Processes

Autor: Abusharkh Ag, Giwa A, Hasan Sw

Publikováno v: Industrial Engineering & Management.

Fossil fuels have been used as the main energy source for the desalination technologies. The continued increase in the demand for desalinated water has resulted in rising greenhouse gas emissions and threat to available fuel reserves. Consequently, m

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::ddf52022254ca889c0063f0f44c7ddd1
https://doi.org/10.4172/2169-0316.1000175

Integrating artificial intelligence modeling and membrane technologies for advanced wastewater treatment: Research progress and future perspectives.

Autor: Cairone S; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II #132, 84084 Fisciano, SA, Italy., Hasan SW; Center for Membranes and Advanced Water Technology (CMAT), Department of Chemical and Petroleum Engineering, Khalifa University of Science and Technology, PO, Box 127788, Abu Dhabi, United Arab Emirates., Choo KH; Department of Environmental Engineering, Kyungpook National University (KNU), 80 Daehak-ro, Bukgu, Daegu 41566, Republic of Korea., Li CW; Department of Water Resources and Environmental Engineering, Tamkang University, 151 Yingzhuan Road Tamsui District, New Taipei City 25137, Taiwan., Zarra T; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II #132, 84084 Fisciano, SA, Italy., Belgiorno V; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II #132, 84084 Fisciano, SA, Italy., Naddeo V; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II #132, 84084 Fisciano, SA, Italy. Electronic address: vnaddeo@unisa.it.

Publikováno v: The Science of the total environment [Sci Total Environ] 2024 Sep 20; Vol. 944, pp. 173999. Date of Electronic Publication: 2024 Jun 13.

Micro(nano)plastics from synthetic oligomers persisting in Mediterranean seawater: Comprehensive NMR analysis, concerns and origins.

Autor: Giannattasio A; Department of Chemistry and Biology 'Adolfo Zambelli', University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Iuliano V; Department of Chemistry and Biology 'Adolfo Zambelli', University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Oliva G; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Giaquinto D; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Capacchione C; Department of Chemistry and Biology 'Adolfo Zambelli', University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Cuomo MT; Department of Economics and Statistics, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Hasan SW; Center for Membranes and Advanced Water Technology (CMAT), Department of Chemical and Petroleum Engineering, Khalifa University of Science and Technology, P.O. Box 127788, Abu Dhabi, United Arab Emirates., Choo KH; Department of Environmental Engineering, Kyungpook National University (KNU), 80 Daehakro, Bukgu, Daegu 41566, Republic of Korea., Korshin GV; Department of Civil and Environmental Engineering, University of Washington, Box 352700, Seattle, WA 98105-2700, United States., Barceló D; Chemistry and Physics Department, University of Almeria, Ctra Sacramento s/n, 04120 Almeria, Spain., Belgiorno V; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Grassi A; Department of Chemistry and Biology 'Adolfo Zambelli', University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy., Naddeo V; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy. Electronic address: vnaddeo@unisa.it., Buonerba A; Department of Chemistry and Biology 'Adolfo Zambelli', University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy; Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II, 84084 Fisciano, Italy. Electronic address: abuonerba@unisa.it.

Publikováno v: Environment international [Environ Int] 2024 Aug; Vol. 190, pp. 108839. Date of Electronic Publication: 2024 Jun 22.