Zobrazeno 1 - 10
of 45
pro vyhledávání: '"Hamid M. Ghasemi"'
Publikováno v:
Tribology Letters. 70
In a dual phase (DP) steel, an increase in the martensite volume fraction leads to a decrease in its carbon content, and hence, elucidating the effect of martensite content on the mechanical and tribological behaviors is not possible. For the first t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::333b089f5245245b5553a424f86f75bd
https://doi.org/10.1007/s11249-022-01616-0
https://doi.org/10.1007/s11249-022-01616-0
Tribocorrosion behaviour of Ti6Al4V under various normal loads in phosphate buffered saline solution
Publikováno v:
Transactions of Nonferrous Metals Society of China. 30:1300-1314
Tribocorrosion tests were conducted on Ti6Al4V against alumina in phosphate buffered saline solution under normal loads of 3−30 N (corresponding to the maximum Hertzian contact pressures of 816−1758 MPa) using a ball-on-disk tribometer. Nano-hard
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b4b80fe24a9a49babec16e7489df540e
https://doi.org/10.1016/s1003-6326(20)65297-9
https://doi.org/10.1016/s1003-6326(20)65297-9
Publikováno v:
Metallurgical and Materials Transactions A. 50:4961-4964
Ferrite grain refinement of a ferritic–martensitic dual-phase (DP) steel was found to be quite effective in enhancement of tensile properties, work-hardening behavior, and quench aging (natural aging) phenomenon. The precipitation strengthening eff
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f129995dceda76dfdaf521c9bc8c86a2
https://doi.org/10.1007/s11661-019-05414-7
https://doi.org/10.1007/s11661-019-05414-7
Publikováno v:
Materials Chemistry and Physics. 233:366-377
Corrosion, erosion and synergism behaviors of Sanicro28 (UNS–N08028) stainless steel have been studied during erosion-corrosion using a slurry impingement rig. The erosive-corrosive slurry solution consisted of 3.5% NaCl saline water and 30 g/l SiO
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b54e1269eeb4f06861218a7924248c01
https://doi.org/10.1016/j.matchemphys.2019.05.051
https://doi.org/10.1016/j.matchemphys.2019.05.051
Autor:
M. Abedini, Hamid M. Ghasemi
Publikováno v:
Journal of Bio- and Tribo-Corrosion. 7
It is known that impingement of solid particles on the surface of alloys could cause an increase in corrosion rate during erosion-corrosion. The increase in corrosion rate by erosion could be studied using the common electrochemical technique of pola
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9fe454ba6fe45f0eec0ddad9018c5df1
https://doi.org/10.1007/s40735-021-00500-z
https://doi.org/10.1007/s40735-021-00500-z
Ti–6Al–4V has prominent physical and mechanical properties, which nominate it for various engineering applications. A drawback of the alloy, however, is low scratch and wear resistance, which can be improved by a diffusion treatment. Oxygen diffu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::142a89a4f535be826295b8bfbb2ca994
Publikováno v:
Journal of Materials Engineering and Performance. 27:1224-1231
In the present study, pure magnesium reinforced with 0, 5, 10 and 15 vol.% SiC particulates was successfully prepared by powder metallurgy technique before being hot extruded. The average 14 μm grain size of the composite specimens remained almost u
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4cf8d34748f2ec173fd199b93674f14e
https://doi.org/10.1007/s11665-018-3195-z
https://doi.org/10.1007/s11665-018-3195-z
Autor:
Reza Soltani, Hamid M. Ghasemi, Ahmad Reza Haghighi, Mahmoud Heydarzadeh Sohi, Mohammad Ansari, Farahnaz Haftlang
Publikováno v:
Vacuum. 146:44-51
Thermo-reactive diffusion (TRD) is a high-temperature process for producing hard metal carbide coatings on carbon-containing substrates. In this study, niobium carbide (NbC) coatings were produced on low-alloy special-purpose tool steel (AISI L2) via
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::533efa0bfd4f23e90151ded5dd52c528
https://doi.org/10.1016/j.vacuum.2017.09.023
https://doi.org/10.1016/j.vacuum.2017.09.023
Publikováno v:
Materials Chemistry and Physics. 271:124878
The effect of 0.5 and 1 wt% Mn additions on the microstructure, mechanical properties, and biocorrosion resistance of an extruded Mg–3Gd–1Zn (GZ31) alloy was investigated. Mn addition refined the grain structure so that the grain size decreased f
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9799750006a9b34727116db9be0cd253
https://doi.org/10.1016/j.matchemphys.2021.124878
https://doi.org/10.1016/j.matchemphys.2021.124878
Autor:
Hamid M. Ghasemi, M. Abedini
Publikováno v:
Transactions of Nonferrous Metals Society of China. 27:2371-2380
Effects of jet velocity, sand concentration and impingement angle on the surface roughness of Al-brass alloy were investigated after erosion and erosion–corrosion tests. The tests were performed using a jet impingement rig. The eroded surfaces were
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a558f8cc2e92370c914dec8355443fc4
https://doi.org/10.1016/s1003-6326(17)60263-2
https://doi.org/10.1016/s1003-6326(17)60263-2