Zobrazeno 1 - 10
of 36
pro vyhledávání: '"H.W Paxton"'
The objective of this report is to develop a vision of the future steelmaking industry including its general characteristics and technologies. In addition, the technical obstacles and research and development opportunities for commercialization of th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5031f042eed098737e9bff8d7a2a8790
https://doi.org/10.2172/34324
https://doi.org/10.2172/34324
Publikováno v:
Philosophical Magazine. 6:473-483
The kinetics of diffusion in cubic metals is treated in terms of statistical mechanics from the point of view of absolute rate theory. An approximate description of the activated state leads to the conclusion that in the two degrees of freedom orthog
Autor:
R.D. Leggeti, H.W. Paxton
Publikováno v:
Corrosion Science. 2:211-223
Single crystals, bicrystals and polycrystals of 20%Cr–20%Ni austenitic stainless steel were corroded in boiling nitric acid. The weight loss was independent of crystallographic orientation, grain size, and heat treatment. Metallographic observation
Autor:
A.H Cottrell, H.W Paxton
Publikováno v:
Acta Metallurgica. 2:3-8
The effects of plastic twisting on the tensile deformation of aluminium crystals are examined. After such a twist the tensile stress needed to continue tensile straining is sharply increased and, in some cases, this is followed by a period of increas
Autor:
H.W. Paxton, A.J. Stavros
Publikováno v:
Corrosion Science. 12:739-748
The effect of heat treatment on potentiostatic polarization behavior of an 18%Ni maraging steel was investigated. In H 2 , sat. 1N H 2 SO 4 active-passive behavior was observed. The passive current density was found to vary with aging treatment; over
Autor:
R.P.M. Procter, H.W. Paxton
Publikováno v:
Corrosion Science. 11:723-736
A series of 18Ni maraging steels of overall commercial purity but containing also deliberate impurity additions of S, P, C, Cr and Si + Mn has been studied. The fracture toughness and stress-corrosion resistance (determined using plane-strain fatigue
Autor:
H.W Paxton, A.T Churchman
Publikováno v:
Acta Metallurgica. 1:473-479
An investigation has been made of the types of stress-strain curve which it is possible to produce in single crystals of iron in the range of temperature between — 180°C and 213°C, for two different carbon contents. It is found that all the effec
Autor:
H.W Paxton
Publikováno v:
Acta Metallurgica. 1:141-143
The crystallographic elements involved in the mechanical twinning of α-iron (i.e. the production of Neumann lamellae) have been evaluated. The technique involved the measurement on a polished surface by optical Goniometey of the tilt produced by twi
Publikováno v:
The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science. 43:257-258
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.