Zobrazeno 1 - 10
of 365
pro vyhledávání: '"Guang Su"'
Publikováno v:
Journal of Materials Research and Technology, Vol 28, Iss , Pp 4040-4051 (2024)
In this study, the age hardening behavior of hot extruded Mg-8Gd-4Y-1Sm-0.5Zr (GWS841) alloy, mechanical properties and microstructural evolution of hot extruded GWS841 alloy during elevated temperature tensile processes were mainly investigated. The
Externí odkaz:
https://doaj.org/article/ab009f82fc174a22a14f30071f852c67
Publikováno v:
Alexandria Engineering Journal, Vol 65, Iss , Pp 649-660 (2023)
Because of complicated geometric structure of C-section rings and the obvious difference of volume distribution along axial direction, the metal is difficult to flow along the radial direction to fill the profile section during ring rolling process.
Externí odkaz:
https://doaj.org/article/72570538bbac4450bfd20f8c111feb8c
Publikováno v:
Materials, Vol 16, Iss 8, p 3062 (2023)
The effect of final thermomechanical treatment (FTMT) on the mechanical properties and microstructure of a T-Mg32(Al Zn)49 phase precipitation hardened Al-5.8Mg-4.5Zn-0.5Cu alloy was studied. The as-cold rolled aluminum alloy samples were subjected s
Externí odkaz:
https://doaj.org/article/d852b13b6c4342c89940b0ac7191143b
Autor:
Guang Su, Aimin Zhang
Publikováno v:
Alexandria Engineering Journal, Vol 60, Iss 1, Pp 49-59 (2021)
This paper established the temperature differential model of temperature-controlled materials, performed the numerical simulation of the relationship between mechanical properties and temperature of temperature-controlled materials, and discussed the
Externí odkaz:
https://doaj.org/article/e044af77a1494fe3be5796af8c60c8cf
Autor:
Wenzhang Wang, Zhaoru Liang, Shiyan Yang, Qing Feng, Xuewei Nie, Guang Su, Wenjie Yuan, Yi Han
Publikováno v:
Thoracic Cancer, Vol 11, Iss 11, Pp 3375-3378 (2020)
After sternal tumor resection, reconstruction of chest wall defects is still a challenging part of thoracic surgery. Three‐dimensional (3D)‐printed titanium alloy prosthesis implants provide an effective solution. The bionic bone trabecular micro
Externí odkaz:
https://doaj.org/article/118a59e332fd4729902e88e82e8681cf
Investigation on the Atomic Mechanism for Grain Refinement of Magnesium Alloys by Mg-Zr Master Alloy
Publikováno v:
Materials, Vol 15, Iss 20, p 7063 (2022)
The valence electron structure, bond energy, and cohesive energy of Mg, Zr, and α-Mg containing Zr, and α-Zr containing Mg crystals were calculated using the empirical electron theory of solids and molecules (EET). The calculation results show that
Externí odkaz:
https://doaj.org/article/630ae9b233e64d0b8dcf9ac28561e25b
Publikováno v:
High Temperature Materials and Processes, Vol 38, Iss 2019, Pp 135-142 (2019)
Permittivity is a vitally important parameter for describing the absorbing and heating characteristics of a material under microwave irradiation, and it is also strongly dependent on temperature. However, the literature contains little information on
Externí odkaz:
https://doaj.org/article/84e75acba50142ab8c44df359880d29a
Autor:
Guang Su, Aimin Zhang
Publikováno v:
Complexity, Vol 2020 (2020)
Solid-state processing of metal material is a very complex physical and chemical process, which is coupled by a series of variations including heat transfer, momentum transfer, mass transfer, and phase change. Applying three-dimensional (3D) finite e
Externí odkaz:
https://doaj.org/article/a3212d01c170438e95b00f1fcf89c0ed
Publikováno v:
Crystals, Vol 12, Iss 1, p 116 (2022)
High-efficiency dechlorination processes are crucial for the clean utilization of CuCl waste residue from zinc hydrometallurgical processes. A new method of oxygen-enriched microwave roasting has been proposed to improve the dechlorination process. T
Externí odkaz:
https://doaj.org/article/ed2d6c03aecc488e8d59a4ca900618cb
Publikováno v:
Crystals, Vol 11, Iss 7, p 810 (2021)
In this paper, nickel-containing residue, a typical solid waste produced in the battery production process, was used to study the cavitation characteristics of ultrasonic waves in a liquid–solid reaction. The ultrasonically-enhanced leaching techno
Externí odkaz:
https://doaj.org/article/d6cb4d89e6ca41f39a7faaf7f9a20b05