Zobrazeno 1 - 10
of 29
pro vyhledávání: '"Guang Hua Wen"'
Publikováno v:
工程科学学报, Vol 44, Iss 9, Pp 1558-1565 (2022)
The success of the continuous casting process is inseparable from the correct use of mold powders. However, fluoride volatilization and the contradiction between slag entrapment, heat transfer, and lubrication that occurs in the mold restrict the dev
Externí odkaz:
https://doaj.org/article/23bfe87095664ac49ebec9ccfd054bc8
Publikováno v:
Materials Science Forum. 1005:10-17
Peritectic transformation contraction of ferrite to austenite plays an important role in the formation of cracks for steels. In order to evaluate the peritectic transformation contraction of steels at the initial solidification, the solidification of
Publikováno v:
Journal of Iron and Steel Research International. 27:1163-1169
The research of carbon content along the casting direction of 82B cord steel billets is of great significance for improving the quality of cord products from subsequent processing. However, the traditional segregation and billets quality evaluation m
Effect of Shear Stress on Viscosity and Crystallization Behavior of CaO-SiO2-Al2O3 Based Mold Fluxes
Publikováno v:
Key Engineering Materials. 847:87-92
The effect of shear stress on the viscosity and crystallization behavior of CaO-SiO2-Al2O3 based mold fluxes were investigated, and the structure evolution of molten slag under shear stress were characterized by magic-angle spinning nuclear magnetic
Publikováno v:
Transactions of Nonferrous Metals Society of China. 27:234-240
The effects of rapid solidification on the microstructure and melting behavior of the Sn–8Zn–3Bi alloy were studied. The evolution of the microstructural characteristics of the solder/Cu joint after an isothermal aging at 150 °C was also analyze
Publikováno v:
Journal of Central South University. 23:1831-1838
Rapidly solidified Sn-9Zn-0.1Pr(/Nd) alloy foils were prepared by melt-spinning method. Through comparison, the effects of rapid solidification process and 0.1%Pr/Nd (mass fraction) addition on the microstructure, thermodynamic characteristic of Sn-9
Publikováno v:
Guang pu xue yu guang pu fen xi = Guang pu. 36(10)
Due to the [Al] reaction with the CaO-SiO2-based mold flux used in the high-Al steels continuous casting processes, decreasing the SiO2 content is decreased and the Al2O3 content in mold flux is increased, thus converting the original CaO-SiO2-based
Publikováno v:
ISIJ International. 52:1179-1185
Publikováno v:
Advanced Materials Research. :610-616
Through laboratory experiments, a green cross-linked movable gel has been developed, which has been used for reservoir profile modification. The main agent of gel is hydrophobic associating polymer, concentration is 3000mg/L; the cross-linking agent
Publikováno v:
Advanced Materials Research. :571-576
Due to the shortage of traditional pre-cross linked particulate, such as suspension property, temperature and salt tolerance, and injectivity, this paper developed hydrophobic association polymer pre-cross linked particulate based on hydrophobic asso