Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Grzegorz Stradomski"'
Autor:
Dariusz Rydz, Grzegorz Stradomski, Michał Pałęga, Mariusz Salwin, Michał Opydo, Arkadiusz Szarek, Joanna Fik, Tomasz Chmielewski
Publikováno v:
Advances in Sciences and Technology, Vol 18, Iss 5, Pp 234-244 (2024)
The aim of the research was to determine the possibility of producing and using layered composites made of aluminum and magnesium alloys Al1050-AZ31-Al1050. The use of layered composites often results from economic conditions. The work analyzed the c
Externí odkaz:
https://doaj.org/article/6708122adb1e4343807b9cf73c6f1011
Publikováno v:
Materials, Vol 17, Iss 14, p 3403 (2024)
Metal products for the metallurgical and machinery industries must meet high requirements in terms of their performance, including reliability, accuracy, durability and fatigue strength. It is also important that materials commonly used to manufactur
Externí odkaz:
https://doaj.org/article/9d500b2e8ed04cb9a717067d4830fb39
Publikováno v:
Materials, Vol 17, Iss 8, p 1914 (2024)
Duplex steel and cast steels have a wide range of applications in many industrial sectors, for example, oil extraction, printing, petrochemical industry, energy—exhaust gases desulphurization systems, seawater desalination plants, and the shipbuild
Externí odkaz:
https://doaj.org/article/beb66d93974643fba3603be71c049d21
Autor:
Sebastian Mróz, Piotr Szota, Tomasz Garstka, Grzegorz Stradomski, Jakub Gróbarczyk, Radosław Gryczkowski
Publikováno v:
Materials, Vol 17, Iss 1, p 52 (2023)
The aim of this research was to select parameters for the roll pre-leveler to provide sheet metal waviness reduction after unwinding from the coil. Straightening parameters were selected based on the results of numerical simulations with the use of a
Externí odkaz:
https://doaj.org/article/fec003db987445aca3259961662ba6de
Publikováno v:
Materials, Vol 16, Iss 17, p 5836 (2023)
Commonly used tool materials for machining wood-based materials are WC-Co carbides. Although they have been known for a long time, there is still much development in the field of sintered tool materials, especially WC-Co carbides and superhard materi
Externí odkaz:
https://doaj.org/article/ed5c51219f034126bf3bbbea1ae2e1a2
Autor:
Grzegorz Stradomski, Dariusz Rydz, Tomasz Garstka, Michał Pałęga, Tomasz Dyl, Arkadiusz Szarek, Justyna Łukomska Szarek, Tomasz Dembiczak
Publikováno v:
Materials, Vol 15, Iss 6, p 2013 (2022)
This paper presents the results of research on the determination of the influence of kinetic asymmetry of work rolls on structural changes in hot-rolled bimetallic sheet metals. The tests were conducted on bimetallic samples composed of materials 10C
Externí odkaz:
https://doaj.org/article/be926ec577864fcdb35b7234e8561050
Autor:
Joanna Wachowicz, Tomasz Dembiczak, Grzegorz Stradomski, Zbigniew Bałaga, Joanna Jasińska, Dariusz Rydz, Jacek Wilkowski, Marcin Dyner
Publikováno v:
Materials, Vol 14, Iss 23, p 7326 (2021)
WC-Co (tungsten carbide-cobalt) composites are widely used in industry, wear-resistant parts, and cutting tools. As successful tool materials, WC-Co carbides are widely applied in metal cutting, wear applications, chipless forming, stoneworking, wood
Externí odkaz:
https://doaj.org/article/6f8ccfb19c27488d8e69e50683a0bd27
Autor:
Stanisław Małecki, Krzysztof Gargul, Marek Warzecha, Grzegorz Stradomski, Artur Hutny, Mateusz Madej, Michał Dobrzyński, Ryszard Prajsnar, Grzegorz Krawiec
Publikováno v:
Materials, Vol 14, Iss 20, p 6061 (2021)
A highly effective method of the processing of steelmaking dust in an arc-resistant furnace has been presented. The aim of the research was to investigate the possibility of processing steelmaking dust in terms of waste minimization and selective rec
Externí odkaz:
https://doaj.org/article/ab152cc534d64376988a382bd6140157
Autor:
Bożena Gzik-Zroska, Kamil Joszko, Wojciech Wolański, Sławomir Suchoń, Michał Burkacki, Marek Ples, Jerzy Malachowski, Michał Tomaszewski, Arkadiusz Szarek, Grzegorz Stradomski, Diana Kitala, Mohsen Akbari, Marek Gzik
Publikováno v:
Materials, Vol 14, Iss 17, p 4785 (2021)
This work aimed to assess the impact of acellularization and sterilization methods on the mechanical properties of biocomposites used as a skin substitute. On the basis of the statistical analysis, it was ascertained that the values of the Young modu
Externí odkaz:
https://doaj.org/article/6804c21b24a8460f8f8bd80b50f15597
Autor:
Joanna Wachowicz, Tomasz Dembiczak, Grzegorz Stradomski, Zbigniew Bałaga, Marcin Dyner, Jacek Wilkowski
Publikováno v:
Materials, Vol 14, Iss 10, p 2618 (2021)
This paper presents the possibility of using the Spark Plasma Sintering (SPS) method to obtain WCCo composite materials. Such materials are used as cutting blades for machining wood-based materials. Two series of composites, different in grain size a
Externí odkaz:
https://doaj.org/article/ee29578d039941388c15b56ede53bf31