Zobrazeno 1 - 10
of 102
pro vyhledávání: '"Gordana Bogoeva Gaceva"'
Publikováno v:
Macedonian Journal of Chemistry and Chemical Engineering, Vol 33, Iss 2, Pp 277-285 (2014)
In this study, rice-hull-filled poly(lactic acid) (PLA) biocomposites were prepared through the addition of 5 wt.% PLA-grafted-MA (CA) for the enhancement of adhesion between the polymer matrix and natural filler. The composites containing 30 wt.% ri
Externí odkaz:
https://doaj.org/article/91b9031ec92040a1a464fbdacb61220b
Publikováno v:
Macedonian Journal of Chemistry and Chemical Engineering, Vol 28, Iss 1, Pp 99-109 (2009)
The interest in natural fiber-reinforced polymer composites is growing rapidly due to their high performance in terms of mechanical properties, significant processing advantages, excellent chemical resistance, low cost and low density. In this study,
Externí odkaz:
https://doaj.org/article/b0ac3718fcc44d279868a26479fba616
Publikováno v:
Macedonian Journal of Chemistry and Chemical Engineering, Vol 40, Iss 2 (2021)
The objective of this investigation was to determine the efficiency of carbonaceous material, consisting of MWCNTs and amorphous carbon obtained by waste polyethylene pyrolysis, as an adsorbent for reactive textile dyes. In this work, the preliminary
Externí odkaz:
https://doaj.org/article/d0d797146be04df7ae95cd737d71ff40
Autor:
Petre Makreski, Aleksandra Ivanoska-Dacikj, Nikola Geskovski, Olga Gigopulu, Gordana Bogoeva-Gaceva
Publikováno v:
Journal of Polymer Research. 30
Publikováno v:
Journal of Industrial Textiles. 51:4041S-4065S
A successful optimization of the electrospinning parameters for obtainment of biodegradable polyester urethane (DP) webs of fibers, neat and graphene oxide (GO) modified, was performed. The effect of the processing parameters (distance between the ne
Publikováno v:
Journal of the Serbian Chemical Society, Vol 74, Iss 4, Pp 441-453 (2009)
In this study, a technological procedure for the production of a molding compound based on short carbon fibers and an ablative phenol–formaldehyde resin for high temperature application was optimized. The starting raw materials were characterized a
Externí odkaz:
https://doaj.org/article/cab424c0df2b44d09ddf063638d51ebe
Autor:
Aleksandra Ivanoska-Dacikj, Petre Makreski, Nikola Geskovski, Joanna Karbowniczek, Urszula Stachewicz, Nenad Novkovski, Jelena Tanasić, Ivan Ristić, Gordana Bogoeva-Gaceva
Publikováno v:
International Journal of Molecular Sciences
International Journal of Molecular Sciences, Vol 23, Iss 988, p 988 (2022)
International Journal of Molecular Sciences; Volume 23; Issue 2; Pages: 988
International Journal of Molecular Sciences, Vol 23, Iss 988, p 988 (2022)
International Journal of Molecular Sciences; Volume 23; Issue 2; Pages: 988
Reduced graphene oxide (rGO) is one of the graphene derivatives that can be employed to engineer bioactive and/or electroactive scaffolds. However, the influence of its low and especially high concentrations on scaffolds’ overall properties and cyt
Publikováno v:
Journal of the Serbian Chemical Society, Vol 71, Iss 5, Pp 483-499 (2006)
Different quantitative approaches enabling the determination of the basic parameters of polymer crystallization were applied to characterize the isothermal and non-isothermal crystallization of homo- and MAH-modified PP in the presence of glass and c
Externí odkaz:
https://doaj.org/article/9f286d8444704b57928972a794ac5f32
Publikováno v:
Journal of the Serbian Chemical Society, Vol 67, Iss 12, Pp 843-859 (2002)
Crystallization and nucleation behavior in model composites based on iPP and differently sized carbon fibres have been analyzed in this work. The investigations were performed in the isothermal regime (120127°C) using PLM and DSC. The results were a
Externí odkaz:
https://doaj.org/article/fc5a443edf51454580efaa1ebe368640
Autor:
Aleksandra Ivanoska-Dacikj, Gordana Bogoeva-Gaceva, Andres Krumme, Elvira Tarasova, Chiara Scalera, Icko Gjorgoski, Velimir Stojkovski, Trpe Ristoski
Publikováno v:
International Journal of Polymeric Materials and Polymeric Biomaterials. 69:1101-1111
In this work, 3D porous electrospun scaffolds based on DegraPol® (DP), a polyester urethane, with different concentrations of graphene oxide (GO) (0.0–2.0 wt%) were obtained. In order to produce sc...