Výsledky vyhledávání

Akademický článek

Phase transformation and microstructure study of the as-cast Cu-rich Cu-Al-Mn ternary alloys

Autor: Holjevac-Grgurić T., Manasijević D., Kožuh S., Ivanić I., Balanović Lj., Anžel I., Kosec B., Bizjak M., Knežević M., Gojić M.

Publikováno v: Journal of Mining and Metallurgy. Section B: Metallurgy, Vol 53, Iss 3, Pp 413-422 (2017)

Four Cu-rich alloys from the ternary Cu-Al-Mn system were prepared in the electric-arc furnace and casted in cylindrical moulds with dimensions: f=8 mm and length 12 mm. Microstructural investigations of the prepared samples were performed by usin

Externí odkaz: https://doaj.org/article/108d202595504a749eeacfc6f784bad0

Zobrazit plný text záznamu

Akademický článek

Comparison of the corrosion behavior and surface morphology of NiTi alloy and stainless steels in sodium chloride solution

Autor: Kožuh S., Vrsalović L., Gojić M., Gudić S., Kosec B.

Publikováno v: Journal of Mining and Metallurgy. Section B: Metallurgy, Vol 52, Iss 1, Pp 53-61 (2016)

The corrosion behavior of NiTi alloy and stainless steels (AISI 316L and X2CrNiMoN22-5-3) in 0.9% sodium chloride (0.154 moll-1) solution was investigated using open circuit potential measurements, potentiodynamic polarization and electrochemical

Externí odkaz: https://doaj.org/article/b8ef2b7140cf4c5d9f115210f7e5498f

Zobrazit plný text záznamu

Akademický článek

Secondary ledeburite formation during various welding techniques

Autor: Tonkovič M.P., Gojić M., Karpe B., Kosec L.

Publikováno v: Journal of Mining and Metallurgy. Section B: Metallurgy, Vol 51, Iss 2, Pp 117-123 (2015)

The occurrence and formation sequence of secondary ledeburite in the heat affected zone of chromium ledeburitic tool steel W.Nr. 1.2379 (OCR12 VM) after welding with SAW, TIG, microplasma and laser welding techniques is presented in this paper. Sp

Externí odkaz: https://doaj.org/article/9b506450a78d438b9a58a8b4e5840126

Zobrazit plný text záznamu

Akademický článek

Development of Direct Reduction Process and Smelting Reduction Processes for the Steel Production

Autor: Kožuh S., Gojić M.

Publikováno v: Kemija u Industriji, Vol 55, Iss 1, Pp 1-10 (2006)

Although the blast furnace and basic oxygen furnace are going to be primary routes for steel production in future, the steelmaking industry using the electric arc furnace route will continue to grow. The importance of high-quality steel products manu

Externí odkaz: https://doaj.org/article/896637f199d540b481dabbd61deab777

Zobrazit plný text záznamu