Zobrazeno 1 - 10
of 143
pro vyhledávání: '"Gijs Krijnen"'
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-11 (2024)
Abstract Fused filament fabrication is a popular fabrication technique. Currently there is a need for in-situ monitoring modalities to gather real-time information on prints, both for quality control and closed-loop control. Despite current advanceme
Externí odkaz:
https://doaj.org/article/b3f0cfc611364615919751858a0ef125
Publikováno v:
ACS Omega, Vol 3, Iss 7, Pp 8067-8073 (2018)
Externí odkaz:
https://doaj.org/article/fb38ba5f453f4ad99d20698cf055887d
Publikováno v:
Sensors, Vol 21, Iss 13, p 4271 (2021)
Sensing of the interaction forces at fingertips is of great value in assessment and rehabilitation therapy. Current force sensors are not compliant to the fingertip tissue and result in loss of touch sensation of the user. This work shows the develop
Externí odkaz:
https://doaj.org/article/e2842a111f25456d831f95bdf743600c
Publikováno v:
Sensors, Vol 21, Iss 11, p 3710 (2021)
3D-printing conductive structures have recently been receiving increased attention, especially in the field of 3D-printed sensors. However, the printing processes introduce anisotropic electrical properties due to the infill and bonding conditions. I
Externí odkaz:
https://doaj.org/article/955954134efb4f1e89dfde6646aae77c
Publikováno v:
IEEE Journal of the Electron Devices Society, Vol 4, Iss 6, Pp 459-465 (2016)
This paper presents on-wafer capacitance measurements of silicon-based RF MEMS capacitive switches down to frequencies below 1 Hz. The capacitance-voltage (C-V) curve measured at very-low frequency (0.01-10 Hz) deviates from the commonly measured and
Externí odkaz:
https://doaj.org/article/212424ba67014e80874ea3851f412b88
Autor:
Gerjan Wolterink, Pedro Dias, Remco G. P. Sanders, Frodo Muijzer, Bert-Jan van Beijnum, Peter Veltink, Gijs Krijnen
Publikováno v:
Sensors, Vol 20, Iss 15, p 4292 (2020)
3D printing of soft EMG sensing structures enables the creation of personalized sensing structures that can be potentially integrated in prosthetic, assistive and other devices. We developed and characterized flexible carbon-black doped TPU-based sEM
Externí odkaz:
https://doaj.org/article/fa6c83df38d64c2aad4e7b39d3e1fe50
Overcoming the Fundamental Limit: Combustion of a Hydrogen-Oxygen Mixture in Micro- and Nano-Bubbles
Publikováno v:
Energies, Vol 9, Iss 2, p 94 (2016)
Combustion reactions quench in small volumes due to fast heat escape via the volume boundary. Nevertheless, the reaction between hydrogen and oxygen was observed in nano- and micro-bubbles. The bubbles containing a mixture of gases were produced in m
Externí odkaz:
https://doaj.org/article/ae5d6210303d42f6a540ab4f6e163efd
Publikováno v:
IEEE sensors journal, 22(11), 10106-10125. IEEE
IEEE Sensors Journal, 22(11)
IEEE Sensors Journal, 22(11)
Silicon sensors date back to before 1960 with early Hall and piezoresistive devices. These used simple processing that was part of the early integrated circuit (IC) industry. As the IC industry developed, silicon sensors could benefit from the techno
Publikováno v:
2022 IEEE Sensors
Surface electromyography (sEMG) is used to determine muscle activity by picking up the associated bio-potentials using skin-mounted electrodes. In this paper, we study how the electrode and skin impedance of 3D printed sEMG electrodes can be improved
Publikováno v:
Additive manufacturing, 56:102890. Elsevier
In this work an optical and inductive calibration procedures for calibrating multi-material fused filament fabrication 3D printers in the x and y directions is presented. The inductive calibration is based on the principle that the inductance of a de