Zobrazeno 1 - 10
of 49
pro vyhledávání: '"Gianluca Alaimo"'
Autor:
Alessandro Ciallella, Ivan Giorgio, Emilio Barchiesi, Gianluca Alaimo, Alberto Cattenone, Benjamin Smaniotto, Antoine Vintache, Francesco D'Annibale, Francesco dell'Isola, François Hild, Ferdinando Auricchio
Publikováno v:
Materials & Design, Vol 237, Iss , Pp 112554- (2024)
Multilayer pantographic metamaterials, in short, pantographic blocks, have shown peculiar mechanical behavior, especially when their constitutive hinges are revolving (i.e., perfect) joints. The pantographic block, which is the subject of the present
Externí odkaz:
https://doaj.org/article/f88b97f0bd964dbb99f1fe141732243b
Autor:
Silvia Pisani, Valeria Mauri, Erika Negrello, Simone Mauramati, Gianluca Alaimo, Ferdinando Auricchio, Marco Benazzo, Rossella Dorati, Ida Genta, Bice Conti, Virginia Valeria Ferretti, Annalisa De Silvestri, Andrea Pietrabissa, Stefania Marconi
Publikováno v:
Frontiers in Bioengineering and Biotechnology, Vol 11 (2023)
Introduction: The problem of organs’ shortage for transplantation is widely known: different manufacturing techniques such as Solvent casting, Electrospinning and 3D Printing were considered to produce bioartificial scaffolds for tissue engineering
Externí odkaz:
https://doaj.org/article/8be114e5957242558b0090ac0e429677
Autor:
Ilona Piekarz, Jakub Sorocki, Nicolo Delmonte, Lorenzo Silvestri, Stefania Marconi, Gianluca Alaimo, Ferdinando Auricchio, Maurizio Bozzi
Publikováno v:
IEEE Microwave and Wireless Components Letters. 32:1179-1182
Autor:
Andrzej Samulak, Nicolo Delmonte, Stefania Marconi, Maurizio Bozzi, Ilona Piekarz, Lorenzo Silvestri, Gianluca Alaimo, Jakub Sorocki, Ferdinando Auricchio
Publikováno v:
IEEE Microwave and Wireless Components Letters. 31:1207-1210
The hybrid integration of an additively fabricated air-filled waveguide (WG) with a printed circuit board (PCB) is presented. An arrangement is proposed where different waveguiding structures share the same common metal plane on PCB. Such an approach
Autor:
Artiom Olaru, Nicolo Delmonte, Stefania Marconi, Gianluca Alaimo, Ferdinando Auricchio, Maurizio Bozzi
Publikováno v:
2022 24th International Microwave and Radar Conference (MIKON).
Autor:
Ferdinando Auricchio, Alessandro Reali, Carmine Maletta, Stefania Marconi, Gianluca Alaimo, Erika Negrello, Massimo Carraturo, Emanuele Sgambitterra
Publikováno v:
Journal of Materials Engineering and Performance. 30:5247-5251
Additive manufacturing (AM), and in particular selective laser melting (SLM) technology, allows to produce structural components made of lattice structures. These kinds of structures have received a lot of research attention over recent years due to
Publikováno v:
Structural and Multidisciplinary Optimization. 64:177-188
Structural topology optimization (STO) is usually treated as a constrained minimization problem, which is iteratively addressed by solving the equilibrium equations for the problem under consideration. To reduce the computational effort, several redu
Publikováno v:
Materials Science and Engineering: A. 863:144526
Autor:
Héctor García-Martínez, Ernesto Avila-Navarro, Stefania Marconi, Nicolo Delmonte, Gianluca Alaimo, Lorenzo Silvestri, Maurizio Bozzi, Ferdinando Auricchio, German Torregrosa-Penalva
Publikováno v:
IEEE Transactions on Microwave Theory and Techniques. 68:4361-4368
A novel band-pass filter topology in waveguide technology is presented in this work. The proposed filter design is based on a periodic structure that uses modified sections of a single-ridge waveguide (SRW) as the unit cell to produce the desired fre
Publikováno v:
Studies in Mechanobiology, Tissue Engineering and Biomaterials ISBN: 9783030923389
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1bdb67c9fc9787f43cb8db33db9b60cb
https://doi.org/10.1007/978-3-030-92339-6_12
https://doi.org/10.1007/978-3-030-92339-6_12