Zobrazeno 1 - 10
of 35
pro vyhledávání: '"Geoff E. Fair"'
Publikováno v:
Journal of the American Ceramic Society. 101:4203-4223
Autor:
Randall S. Hay, Allison M. Hart, Nicholas G. Usechak, Randall G. Corns, Santeri A. Potticary, Hyun Jun Kim, Geoff E. Fair
Publikováno v:
Journal of the European Ceramic Society. 35:4251-4258
Polycrystalline yttrium–aluminum garnet (YAG) fibers are attractive for high-power lasers and for high-temperature structural materials. Processing methods for
Publikováno v:
Journal of the American Ceramic Society. 98:2295-2306
Nextel™ 610 alumina fibers were heat-treated at 1100°C–1500°C for 1–100 h in air. Grain size distributions (GSDs) and grain orientation distributions (ODs) with respect to the fiber axis were characterized by analysis of TEM images from longi
Publikováno v:
Journal of the American Ceramic Society. 98:1907-1914
Nextel™ 610 alumina fiber tows were heat-treated at 1100°C–1500°C for 1 to 100 h in air. Tensile strengths and Weibull moduli were measured for 30 filaments after each heat-treatment. 3-D grain size and orientation distributions were described
Autor:
Kathleen Shugart, Dean P. Brown, David E. Zelmon, Hyun Jun Kim, Kristin A. Keller, Triplicane A. Parthasarathy, HeeDong Lee, Geoff E. Fair, Augustine Urbas, Benjamin G. Griffin, K. L. Averett, Sean A. McDaniel, Gary Cook, Randall G. Corns, Randall S. Hay, Ali H Kadhim, Nicholas G. Usechak, Santeri A Potticary, Frank Kenneth Hopkins
Publikováno v:
Optics express. 25(6)
A polycrystalline 1.5% Ho: YAG fiber with a diameter of 31 µm was prepared. Surface roughness from grain boundary grooving was reduced by polishing, which decreased the fiber scattering coefficient from 76 msup-1/supto 35 msup-1/sup. Lasing tests we
Publikováno v:
Journal of the European Ceramic Society. 34:2413-2426
Creep rates of Nextel™ 610 alumina fibers were measured at 1100 °C and 100–500 MPa in air and steam. Steam increased creep rates and reduced fiber lifetimes. Fiber microstructures were characterized by TEM. The small amounts of grain growth, fib
Publikováno v:
Materials Science and Engineering: A. 589:125-131
Compressive creep of high-purity polycrystalline yttrium aluminum garnet (YAG, Y3Al5O12) was investigated at 1300 °C and 50–200 MPa in air and in steam. Compressive creep behavior of silica-doped polycrystalline YAG (Y3Al5O12–0.14 wt% SiO2) was
Publikováno v:
Acta Materialia. 61:6114-6124
Creep of Nextel™ 720 alumina–mullite fiber tows was investigated at 1100 and 1200 °C for tensile stresses of 100–400 MPa in air and in steam. Fiber microstructures were characterized after creep by transmission electron microscopy. At low stre
Autor:
Triplicane A. Parthasarathy, J. E. Davis, Pavel Mogilevsky, Emmanuel E. Boakye, Randall S. Hay, Geoff E. Fair
Publikováno v:
Journal of the American Ceramic Society. 96:1586-1595
The reduction in fiber push-out stress by transformation plasticity in xenotime rare-earth orthophosphate fiber–matrix interphases was demonstrated. Processing methods for transformable xenotime coatings were explored. For conversion to xenotime du
Publikováno v:
International Journal of Applied Ceramic Technology. 10:276-284
Creep of Nextel™610 fibers was investigated at 1100°C and 100–500 MPa in air and in steam. The effect of loading rate on fiber tensile strength was also explored. The presence of steam accelerated creep and reduced fiber lifetimes. Loading rate