Zobrazeno 1 - 10
of 55
pro vyhledávání: '"Gbadebo Owolabi"'
Publikováno v:
Metals, Vol 14, Iss 9, p 988 (2024)
This study investigated the fatigue performance of 316L stainless steel fabricated via laser powder bed fusion (LPBF). Stress-controlled fatigue tests were performed at different stress amplitudes on vertically built samples using a frequency of 15 H
Externí odkaz:
https://doaj.org/article/7191b5554cc145b9bd27e434de42439e
Publikováno v:
Materials, Vol 17, Iss 4, p 913 (2024)
In this study, a thorough investigation of the microstructures and tensile properties of 316L stainless steel fabricated via laser powder bed fusion (L-PBF) was done. 316L stainless steel specimens with two different thicknesses of 1.5 mm and 4.0 mm
Externí odkaz:
https://doaj.org/article/44959b3b707945b98213ec03981bba94
Publikováno v:
Journal of Advanced Ceramics, Vol 7, Iss 1, Pp 5-16 (2017)
Abstract In this study, the effects of mechanical vibration on the mechanical properties of ceramic diesel particulate filters (DPFs) were investigated. The goal is to determine how the mechanical vibration used in the regenerative ash cleaning proce
Externí odkaz:
https://doaj.org/article/2b27e99b36f9493082eb3dfa6c3cfb74
Publikováno v:
Materials Research, Vol 20, Iss 4, Pp 1143-1152 (2017)
To modify the properties of Ti6Al4V alloy, Cu has been added to host an antimicrobial effect in the revised alloy for marine application. The Laser Metal Deposition (LMD) process on the Ti6Al4V alloy and Cu was been investigated for surface modificat
Externí odkaz:
https://doaj.org/article/bf937b6101094d2cad02378aeea484e7
Publikováno v:
Journal of Materials Engineering and Performance. 30:6673-6690
The use of fused filament fabrication (FFF) acrylonitrile butadiene styrene (ABS) and other thermoplastics in radiation environments is beginning to be studied as possible replacements for traditionally manufactured parts and tools. Interlayer adhesi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bf2e7204f18a018ea312ff276a7b8b84
https://doi.org/10.1007/s11665-021-05955-2
https://doi.org/10.1007/s11665-021-05955-2
Publikováno v:
Journal of Materials Engineering and Performance. 28:7602-7615
The main objective of the present study was to investigate the effect of Mg/Si precipitates on the hot-compression response of Al-Mg-Si alloy and further inspect the influence of compression temperatures and Mg/Si precipitates on microstructural chan
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a55dd78f3c38cc2e1b31af4dd1d2c497
https://doi.org/10.1007/s11665-019-04459-4
https://doi.org/10.1007/s11665-019-04459-4
Publikováno v:
Transactions of the Indian Institute of Metals. 72:2523-2531
In the present work, cryorolling (CR) (rolling temperature is − 196 °C) followed by annealing (AN) (100–400 °C for 1 h) of 6082 Al alloy has been performed. The main objective of this study was to investigate the thermal stability of the ultraf
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1d2aba6e2978d23806c2e925907794e8
https://doi.org/10.1007/s12666-019-01722-z
https://doi.org/10.1007/s12666-019-01722-z
Publikováno v:
Transactions of the Indian Institute of Metals. 72:2623-2630
Aluminum alloys are highly favored in the aerospace and other transportation industries due to their high strength-to-weight ratio. In this study, the tensile properties of commercial AA 2219-T8, AA 2519-T8 and AA 2624-T351 aluminum alloys were inves
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::354b3b01349ee8fd239a224e56f0bb77
https://doi.org/10.1007/s12666-019-01731-y
https://doi.org/10.1007/s12666-019-01731-y
Publikováno v:
Metals and Materials International. 25:900-911
In this study, the high strain rate behavior of ultrafine grained (UFG) AA2219 alloy processed via multi axial forging at cryogenic temperature was investigated. Room temperature forged sample was used as a reference to determine the effects of signi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::23fc6921538b523157e0443e2550681c
https://doi.org/10.1007/s12540-019-00254-x
https://doi.org/10.1007/s12540-019-00254-x
Publikováno v:
Open Journal of Organic Polymer Materials. :1-27
In this paper, the effects of build parameters on the mechanical properties of 3D-printed acrylonitrile butadiene styrene (ABS) produced using fused deposition modeling (FDM) are investigated. Full factorial experimental design incorporating a 2-leve
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c9de87569ee18d3c11da35e5816bec91
https://doi.org/10.4236/ojopm.2019.91001
https://doi.org/10.4236/ojopm.2019.91001