Zobrazeno 1 - 10
of 1 152
pro vyhledávání: '"GAO Weidong"'
Publikováno v:
Jixie chuandong, Vol 48, Pp 67-72 (2024)
In order to reduce the drag torque under high speed conditions, the equivalent radius is introduced into the traditional low speed torque model of a wet clutch with track vehicle, and the calculation model of the drag torque with radial groove is der
Externí odkaz:
https://doaj.org/article/1d411666661045e78c39eb9074a3d4b0
Publikováno v:
Xi'an Gongcheng Daxue xuebao, Vol 36, Iss 5, Pp 8-13 (2022)
At present, there are some problems with fiber-based artifical mucles, such as harsh stimulation conditions, chemical toxicity, and high cost, To remove the barriers of their application in intelligent textiles, was investigated the fabrication, perf
Externí odkaz:
https://doaj.org/article/6130afbbc8774de787d0f6face997a8d
Publikováno v:
Fushe yanjiu yu fushe gongyi xuebao, Vol 39, Iss 1, Pp 37-46 (2021)
Nitrile butadiene rubber/polyvinyl chloride vulcanized rubber was prepared by high-energy electron beam (EB) irradiation and sulfur vulcanization. The effects of the absorbed dose and of these two curing processes on the properties and structure of t
Externí odkaz:
https://doaj.org/article/7ad7569bf03043f28f4bb8bc17a94cc4
Publikováno v:
AUTEX Research Journal, Vol 22, Iss 1, Pp 135-141 (2020)
The fatigue behavior of cotton warps was studied by a newly weaving load simulator (WLS) developed in our laboratory. Reborn hairiness, strength retention, and elongation retention of sized warps were adopted to evaluate the physical and mechanical p
Externí odkaz:
https://doaj.org/article/c10c818756a44bc29789591509808a49
Publikováno v:
AUTEX Research Journal, Vol 20, Iss 1, Pp 43-48 (2020)
During the air flow twisting process of jet vortex spinning, the moving characteristics of flexible free-end fiber are complex. In this paper, the finite element model of the fiber is established based on elastic thin rod element. According to the ai
Externí odkaz:
https://doaj.org/article/cbd6780404924887b1d87518ff0e8b8b
Publikováno v:
AUTEX Research Journal, Vol 20, Iss 1, Pp 1-10 (2020)
Compact-siro spun with lattice apron combines compact spinning and siro spinning, and is widely put into practice. In this paper, compact-siro spun models with the parallel shaped slots, oblique parallel shaped slots and V-shaped slots were simulated
Externí odkaz:
https://doaj.org/article/b3dc095f10564905a2f598eb84b3a704
Publikováno v:
AUTEX Research Journal, Vol 19, Iss 2, Pp 147-156 (2019)
In this article, a computerized method is proposed for simulating digital woven fabric (DWF) based on sequential yarn images captured from a moving yarn. A mathematical model of woven fabric structure is established by assuming that the crimped shape
Externí odkaz:
https://doaj.org/article/55e32c0f492346ee8596b7c2347e2f2b
Publikováno v:
AUTEX Research Journal, Vol 19, Iss 1, Pp 68-73 (2019)
In this study, the wicking properties of ring and compact-siro ring spun staple yarns were compared. The twist level, which is related to the structure of the staple yarns, was found to significantly influence the wicking property of the two kinds of
Externí odkaz:
https://doaj.org/article/fe033cf5c6f7445dbc3dd6f72fce1720
Publikováno v:
AUTEX Research Journal, Vol 18, Iss 3, Pp 314-322 (2018)
Unlike the normal sizing method, the foam sizing had been proven to be a low-add-on technology. To investigate the effect of foam sizing, film thickness, sized-yarn evenness, and size penetration rate were necessary to evaluate the performances of fo
Externí odkaz:
https://doaj.org/article/5b2660f2d03e413d9b33a2a340bca995
Publikováno v:
AUTEX Research Journal, Vol 18, Iss 1, Pp 61-66 (2018)
This study was aimed at investigating the process optimization of foam sizing for cotton yarns. In this work, effects of major foam-sizing process factors including size concentration, blowing ratio, stirring speed, pre-wetting temperature, pre-dryin
Externí odkaz:
https://doaj.org/article/25e14a971b8b49599aa05228d4aadb71