Zobrazeno 1 - 10
of 42
pro vyhledávání: '"G.S Pradeep Kumar"'
Autor:
G.S. Pradeep Kumar, R. Keshavamurthy, Harish Kumar M, Raghu Yogaraju, Sachit T S, C. Durga Prasad
Publikováno v:
Results in Surfaces and Interfaces, Vol 16, Iss , Pp 100278- (2024)
This study assesses the efficacy of plasma-sprayed Cr2C3 coatings on AA6061 aluminum alloy in reducing erosion at different angles (30, 60, and 90°). The experimental setup involved maintaining a distance of 80 mm between the components, feeding the
Externí odkaz:
https://doaj.org/article/5807d0d4115b4a4ab786aa2490178a77
Autor:
Vijay Tambrallimath, R. Keshavamurthy, Paulo Davim, G.S. Pradeep Kumar, Gloria Pignatta, Abhinandan Badari, T.M. Yunus Khan, Irfan Anjum Badruddin
Publikováno v:
Journal of Materials Research and Technology, Vol 21, Iss , Pp 810-826 (2022)
Fused filament fabrication (FFF) has seen an upsurge in its utilization towards development of tailored made materials of polymer base. The advancement and diversity in fabricating the polymer composite parts by using FFF has seen the embracement of
Externí odkaz:
https://doaj.org/article/7f2b688081d146c6a65c3a4e07295aca
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
Vijay Tambrallimath, Ramaiah Keshavamurthy, Sakshi Arun, Talha Toufeeq, Yash Yadav, V. Umesh, G.S. Pradeep Kumar
Publikováno v:
Journal of The Institution of Engineers (India): Series D. 102:331-344
The tribological behaviour of WC–Co Cermet coatings coated on Al6061 alloy was studied in this work. WC–Co Cermet coatings have been coated with different thicknesses by changing the amount of the cobalt using HVOF (High velocity oxy fuel techniq
Autor:
M. Harish Kumar, Shijo Thomas, Gurumoorthy S Hebbar, H. M. Yegnesh, G.S. Pradeep Kumar, Sharada Bharadwaj
Publikováno v:
Transactions of the Indian Institute of Metals. 74:2013-2025
High-velocity oxy-fuel (HVOF) is a widely used thermal spray technique to obtain high density, high bond strength, and improved hardness coatings. In the present work, optimization of HVOF process parameters was carried out using the Taguchi method t
Publikováno v:
Materials Today: Proceedings. 43:2909-2914
In the present investigation LM4 reinforced 6 wt% Titanium Carbide particles composite was developed by stir casting bottom pouring method. The cast composite specimen was obtained in a cylindrical shape of dimensions 50 mm dia and 100 mm length. The
Autor:
M. Harish Kumar, Vivin Chackalayil George, J.T. Kavya, G.S. Pradeep Kumar, Minumula Prabhu Akhil, Ramaiah Keshavamurthy
Publikováno v:
Materials Today: Proceedings. 46:4574-4578
This paper aims attention at characteristics of corrosion of reinforced primary and secondary processed Al6061 based composites along TiC particles. Using potassium hexaflourotitanate (K2TiF6) and potassium tetrafluoroborate (KB4) halide salts, the s
Prediction of machining characteristics of Abrasive Water Jet Machined Al7075-TiB2 In-situ composite
Publikováno v:
Materials Today: Proceedings. 24:851-858
The current study emphasizes on predicting the characteristics of Abrasive Water Jet Machining of Al 7075-TiB2 In-situ composite. Experimental trials were carried out in accordance with Taguchi’s L25 orthogonal array. Feed forward type of Artificia
Autor:
Ramaiah Keshavamurthy, D. Saravanabavan, Vijay Tambrallimath, Praveennath G. Koppad, G.S. Pradeep Kumar
Publikováno v:
Composites Communications. 15:129-134
Property enhancement of polymers could be achieved through blending of two or more polymers and via addition of filler materials to meet the application requirements. In the present investigation Polycarbonate (PC) and Acrylonitrile Butadiene Styrene
Publikováno v:
Journal of Bio- and Tribo-Corrosion. 7
The slurry erosion behavior of thermally sprayed Cr2O3 coatings on Aluminium alloy is evaluated in the current research. By employing a high-velocity oxy-fuel (HVOF) spraying process, Cr2O3 coatings were deposited on the Aluminium 6061 alloy. Microha