Zobrazeno 1 - 10
of 106
pro vyhledávání: '"G J, Baker"'
Publikováno v:
Drying Technology. 29:1901-1910
Factors affecting the energy consumption of a pilot-scale spray dryer have been studied. The feedstock employed was instant coffee solution (50–150 gl−1). Its feed rate ranged from 0.83 to 1.9 mls−1 and the inlet air temperature from 473–533
Autor:
Haitham M.S. Lababidi, C. G. J. Baker
Publikováno v:
Drying Technology. 28:730-741
This article describes the development of a plug-flow fluidized bed dryer simulator, which was implemented on Microsoft Excel. The drying kinetics are described by a constant rate period followed by two falling rate periods; both hygroscopic and nonh
Publikováno v:
Adsorption. 15:461-475
The effects of ambient temperature (25°C to 40°C) and relative humidity (0% to 30%) on the adsorption of toluene, and 1,1,1 trichloroethane on silica alumina, silica alumina impregnated with KMnO4, and activated carbon granules and pellets were det
Publikováno v:
The Canadian Journal of Chemical Engineering. 81:17-25
The effects of air-flow pulsation and water and air flowrates on the hydrodynamics of liquid—gas and three-phase fluidized beds containing 3-mm glass beads have been studied in a 90-mm i.d. column. Under steady-flow conditions, both types of bed co
Autor:
H. A. H. Al-Adwani, C. G. J. Baker
Publikováno v:
Drying Technology. 25:311-318
This article describes the results of calculations of specific energy consumption, E s , performed on a well-mixed fluidized bed dryer simulator. Exhaust air temperature–humidity loci required to yield a specified outlet moisture content were also
Publikováno v:
Drying Technology. 24:147-157
Plug flow fluid bed dryers (PFFBD) have been used for drying of particulate solids such as salts, ion exchange resins, grains, and a variety of other products. The present article describes the use of a mathematical model for the scale-up of lab-scal
Autor:
C. G. J. Baker
Publikováno v:
Drying Technology. 23:2071-2087
Recent European legislation designed to limit carbon emissions and to reward the efficient use of energy will undoubtedly encourage dryer operators to reduce their fuel consumption. This article first describes such legislation, which includes the cl
Autor:
K. A. McKenzie, C. G. J. Baker
Publikováno v:
Drying Technology. 23:365-386
In 2000, the U.K. government's Energy Efficiency Best Practice Programme commissioned a survey to determine the energy consumption of spray dryers within the chemicals, foods, and ceramics industries. The results of this survey, which included dryers
Autor:
C. G. J. Baker
Publikováno v:
Stewart Postharvest Review. 1:1-11
Purpose of the review: In recent months, the cost of fuel has increased dramatically. As dryers are major consumers of energy, it is an opportune time to revisit techniques that may be of value in containing the escalating cost of postharvest drying.
Publikováno v:
Drying Technology. 22:237-258
A modular fuzzy expert system (KSpray) has been formulated to aid in the selection of spray-drying equipment for food products. KSpray can be used either as a stand-alone program or as an integral part of DrySES, the web-based selection algorithm dev