Zobrazeno 1 - 10
of 58
pro vyhledávání: '"Güler Özgül"'
Autor:
Güler Özgül, Efsun Gonca Uğur Chousein
Publikováno v:
Bagcilar Medical Bulletin, Vol 7, Iss 1, Pp 6-11 (2022)
Objective:It was aimed to compare the diagnostic rates of radiological diagnostic methods such as chest X-rays and chest computerized tomography (CCT) and swab (throat and nose) reverse-transcriptase polymerase chain reaction test (RT-PCR) in preoper
Externí odkaz:
https://doaj.org/article/25f6cc46346345b8ab12aba8e84d8788
Autor:
Güler Özgül, Erkan Yavuz
Publikováno v:
Bagcilar Medical Bulletin, Vol 5, Iss 4, Pp 204-209 (2020)
Objective:The uses of flow volume loop (FVL) section of pulmonary function test (PFT) and thorax computed tomography (TCT) are examined in the evaluation of dyspnea, which is one of the leading symptoms of compression due to goiter.Method:Thirty-six
Externí odkaz:
https://doaj.org/article/d0f8fa493a684cbd846190030bd252ca
Autor:
Mehmet Akif Özgül, Ümran Toru, Murat Acat, Güler Özgül, Erdoğan Çetinkaya, H. Erhan Dinçer, Derya Özden Omaygenç, Halide Nur Ürer
Publikováno v:
Respiratory Medicine Case Reports, Vol 13, Iss C, Pp 57-60 (2014)
Inflammatory myofibroblastic tumors (IMTs) are rare childhood neoplasms, with benign clinical course. Although etiology of IMTs are not clear, recent studies have reported that IMT is a true neoplasm rather than a reactive or inflammatory lesion. IMT
Externí odkaz:
https://doaj.org/article/3c4b8836881b4ab79af841852be75f78
Autor:
M. Akif Özgül, Ekrem Cengiz Seyhan, Güler Özgül, Erdoğan Çetinkaya, Songul Büyükkale, Nurcan Ünver, Tansel Çakır, Adnan Sayar
Publikováno v:
Respiratory Medicine Case Reports, Vol 13, Iss C, Pp 28-31 (2014)
Primary benign tumors of the trachea are uncommon. These tumors may cause tracheal occlusion and lead to a misdiagnosis of asthma. Ectopic parathyroid adenoma (EPA) can be seen anywhere between the mandibular angle and the mediastinum. The distal par
Externí odkaz:
https://doaj.org/article/3960548adcca4ca4bb989d2f759e0944
Publikováno v:
Zeitschrift für Naturforschung Section A: A Journal of Physical Sciences; Oct2024, Vol. 79 Issue 10, p987-996, 10p
Autor:
Erkan Yavuz, Güler Özgül
Publikováno v:
Bagcilar Medical Bulletin. 5:204-209
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a64e126c735a793b24d2c035920a14b6
https://doi.org/10.4274/bmb.galenos.2020.07.030
https://doi.org/10.4274/bmb.galenos.2020.07.030
Autor:
Orhan Dedeoğlu, Hande Güler Özgül
Publikováno v:
Transactions of the Indian Institute of Metals. 73:2281-2289
In this study, mechanical properties, macrostructure and microstructure of the friction stir spot weld joints were investigated under the influence of pinless tool geometry and different rotation speed parameters (1350, 1850 and 2530 rpm) using Al575
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::06f27ab5224680c9b297ef6c82327910
https://doi.org/10.1007/s12666-020-02034-3
https://doi.org/10.1007/s12666-020-02034-3
Autor:
Onur Tatlı, Hande Güler Özgül
Publikováno v:
ICONTECH INTERNATIONAL JOURNAL. 4:13-24
Along with the technological developments, it is an expected situation to discover new developed production methods. Additive manufacturing technologies, such as three-dimensional (3D) printers are one of these methods, allowing direct production of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c4c7997f74a89582d16d4e8bc6eb5a43
https://doi.org/10.46291/icontechvol4iss1pp13-24
https://doi.org/10.46291/icontechvol4iss1pp13-24
Autor:
Güler Özgül, Demet Tutar, Mehmet Akif Özgül, Ekrem Cengiz Seyhan, Efsun Uğur, Erdoğan Çetinkaya, Deniz Dogan
Publikováno v:
Tuberk Toraks. 67:272-284
Background: Tracheobronchial stents (TBS) are the principal modality used to manage intrinsic tracheobronchial pathology and extrinsic airway compression. Objectives: To assess the placement, indications, surveillance management, complications, and l
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::41b8aedc13de18430d9103d49af3c359
https://doi.org/10.5578/tt.68967
https://doi.org/10.5578/tt.68967
Autor:
Hande Güler Özgül, Onur Tatlı
Publikováno v:
Revista de Metalurgia, Vol 57, Iss 3 (2021)
Hoy, los avances tecnológicos han llevado al descubrimiento de métodos de fabricación desarrollados recientemente. La tecnología de fabricación aditiva con impresora tridimensional (3D) es uno de estos nuevos métodos. En este método, se pueden
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::7ec192ea2327c3325fefec4f2df35b6f
https://revistademetalurgia.revistas.csic.es/index.php/revistademetalurgia/article/view/1519
https://revistademetalurgia.revistas.csic.es/index.php/revistademetalurgia/article/view/1519