Zobrazeno 1 - 10
of 37
pro vyhledávání: '"Funda KAHRAMAN"'
Publikováno v:
Gazi Üniversitesi Fen Bilimleri Dergisi, Vol 8, Iss 2, Pp 293-305 (2020)
In this study, the effects of drilling parameters on the thrust force in the drilling process of glass fiber reinforced polymer composites were investigated experimentally and statistically. Multiwalled carbon nanotube wt. % content, cutting speed an
Externí odkaz:
https://doaj.org/article/15574c0470b84f56aaee5237b4100b04
Publikováno v:
Tehnički Glasnik, Vol 12, Iss 1, Pp 5-10 (2018)
In this study, the effect of cutting parameters such as the depth of cut, feed rate, cutting speed and the number of inserts on surface roughness were investigated in the milling of the AISI 4140 steel. The optimal control factors for surface quality
Externí odkaz:
https://doaj.org/article/2eb5f9fa114a4758adf5b33027b6a829
Publikováno v:
Tehnički Glasnik, Vol 12, Iss 2, Pp 104-108 (2018)
In this research, the effect of machining parameters on the various surface roughness characteristics (arithmetic average roughness (Ra), root mean square average roughness (Rq) and average maximum height of the profile (Rz)) in the milling of AISI 4
Externí odkaz:
https://doaj.org/article/35169e95c82549ad9c9fd496b67a901c
Autor:
Funda Kahraman, Mustafa Kemal Kulekçi
Publikováno v:
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Vol 11, Iss 1, Pp 10-14 (2007)
Modification of Al-Si cast alloys can be achieved in two different ways, namely by additions of certain eleınents orwith rapid cooling rate. Modifications of the Al-Si al1oys are carried out extensivcly in industry to improve themechanical propertie
Externí odkaz:
https://doaj.org/article/9841ea699ab84b85a2e9083cabc39311
Autor:
Umut ERGÜN, Funda KAHRAMAN
Publikováno v:
Çukurova Üniversitesi Mühendislik Fakültesi Dergisi. :281-292
Elektrik yapım işi temel olarak; üretilen ve dağıtıma hazır elektriğin, hane ve işletmelere dağıtılması için gerekli olan alt yapının inşasını ve bu konuda önceden tesis edilmiş altyapıların modernizasyonunu ve büyütülmesini
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e08aa559fe7d7ab0fbc80da2c6770d0c
https://doi.org/10.21605/cukurovaumfd.1273839
https://doi.org/10.21605/cukurovaumfd.1273839
Publikováno v:
Volume: 3, Issue: 4 159-163
European Mechanical Science
European Mechanical Science
In this study, the selection of optimal cutting parameters for face milling of 5083 aluminum was investigated in order to minimize the surface roughness. Effect of selected parameters on the surface roughness was analyzed by using analysis of varianc
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::51c3a39814e153f82875a5629a256a1c
https://doi.org/10.26701/ems.537087
https://doi.org/10.26701/ems.537087
Publikováno v:
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi. 34:135-140
In this study formability of AISI 1020 steel sheet with different thicknesses was investigated by limiting dome height test at room temperature. The influence of thickness on the stretchability, bendability characteristics and dome height for AISI 10
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1a9b7d274eb50ac93eb985ed8c95419a
https://doi.org/10.21605/cukurovaummfd.608976
https://doi.org/10.21605/cukurovaummfd.608976
Autor:
Mehmet Küçük, Funda Kahraman
Publikováno v:
European Journal of Science and Technology.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fad4c4c652afe7809bf5bfef9db841e6
https://doi.org/10.31590/ejosat.789424
https://doi.org/10.31590/ejosat.789424
Publikováno v:
Industrial Lubrication and Tribology. 70:1187-1192
Purpose This paper aims to investigate the effect of fly ash reinforcement ratio (Rr) and sintering temperature (T) on the transverse rupture strength (TRS), hardness and density of fly ash reinforced bronze-based composite materials by using multi-o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4ee98bc3a34396dde40df7c1fd3db4b0
https://doi.org/10.1108/ilt-02-2018-0059
https://doi.org/10.1108/ilt-02-2018-0059
Publikováno v:
Tehnički Glasnik, Vol 12, Iss 2, Pp 104-108 (2018)
Tehnički glasnik
Volume 12
Issue 2
Tehnički glasnik
Volume 12
Issue 2
In this research, the effect of machining parameters on the various surface roughness characteristics (arithmetic average roughness (Ra), root mean square average roughness (Rq) and average maximum height of the profile (Rz)) in the milling of AISI 4
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9bd7a16837f8916c092ce52e4ce8f8d9
https://doi.org/10.31803/tg-20180201125123
https://doi.org/10.31803/tg-20180201125123