Zobrazeno 1 - 10
of 145
pro vyhledávání: '"Freddie L. Inambao"'
Autor:
Abdulfatah Abdu Yusuf, V. Karthickeyan, Sharif S. Nura, Abdurrahman H. Shu'ibu, Atiku A. Farooq, Freddie L. Inambao
Publikováno v:
Data in Brief, Vol 29, Iss , Pp - (2020)
The present data article is centered on the research work which examines the effect of fuel preheating on DI diesel engine fuelled with Fish Oil Ethyl Ester (FOEE). Kirloskar TV1 model water cooled diesel engine with eddy current dynamometer was used
Externí odkaz:
https://doaj.org/article/a7f5a742f5f8403c8958e04dce9a6a70
Autor:
Tatenda J. Bvumbe, Freddie L. Inambao
Publikováno v:
Journal of Energy in Southern Africa, Vol 24, Iss 3, Pp 26-32 (2017)
A 35kW pilot solar powered absorption cooling system was designed and constructed at Moot Hospital in Pretoria to investigate the technical and economic performance of the technology. Technically, the system produced an estimated 43.938MWh of cooling
Externí odkaz:
https://doaj.org/article/d19cfebb0b9145709553f53872263be9
Publikováno v:
Journal of Energy in Southern Africa, Vol 24, Iss 4, Pp 51-62 (2017)
Solar thermal energy (STE) technology refers to the conversion of solar energy to readily usable energy forms. The most important component of a STE technology is the collectors; these absorb the shorter wavelength solar energy (400-700nm) and conver
Externí odkaz:
https://doaj.org/article/7956a3ca25604ded8dc68a86b2959851
Publikováno v:
Journal of Energy in Southern Africa, Vol 25, Iss 2, Pp 39-47 (2017)
Optimization of the production process in biodiesel production holds huge prospects. A reduced cost option is the optimization of process variables that affect yields and purity of biodiesel, which was achieved in this study. Optimized production and
Externí odkaz:
https://doaj.org/article/be703aa2e73c43178bb8b1c3dfea9295
Autor:
Tatenda J. Bvumbe, Freddie L. Inambao
Publikováno v:
Journal of Energy in Southern Africa, Vol 26, Iss 1, Pp 106-112 (2017)
The demand for air conditioning is increasing due to changing architectural trends and increased standards of living and indoor comfort conditions. Coupled to this, refrigerants used in conventional refrigeration systems have detrimental effects on t
Externí odkaz:
https://doaj.org/article/2d5d03d51a58419da0bd18f3dc48e573
Publikováno v:
Case Studies in Thermal Engineering, Vol 14, Iss , Pp - (2019)
The cold-start condition is an important factor affecting vehicle emissions from gasoline direct injection (GDI) and port fuel injection (PFI) vehicles. This paper studied the recent trends in cold-start emissive behavior with the impact of changes i
Externí odkaz:
https://doaj.org/article/a69b6f4d961742868b24392c6f5ef636
Bioethanol production from different Matooke peels species: A surprising source for alternative fuel
Publikováno v:
Case Studies in Thermal Engineering, Vol 13, Iss , Pp - (2019)
Conversion of agro-industrial wastes to energy is an innovative technique for waste valorization and management which reduces exhaust emissions and offers socioeconomic benefits. The goal of this paper is to investigate the feasibility of producing b
Externí odkaz:
https://doaj.org/article/08f10284787a4c61bb60b1b04b2ad673
Publikováno v:
International Journal of Photoenergy, Vol 2018 (2018)
The need for affordable, clean, efficient, and sustainable solar cells informed this study. Metal oxide TiO2/NiO heterojunction solar cells were fabricated using the spray pyrolysis technique. The optoelectronic properties of the heterojunction were
Externí odkaz:
https://doaj.org/article/9e4c6dbae8434211a987f17cb711405a
Autor:
Semakula Maroa, Freddie L. Inambao
Publikováno v:
Engineering in Life Sciences, Vol 21, Iss 12, Pp 790-824 (2021)
Engineering in Life Sciences
Engineering in Life Sciences
The production of biodiesel through chemical production processes of transesterification reaction depends on suitable catalysts to hasten the chemical reactions. Therefore, the initial selection of catalysts is critical although it is also dependent
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e8c55ec71586610386d69bb2c441916f
https://doi.org/10.1002/elsc.202100025
https://doi.org/10.1002/elsc.202100025
Publikováno v:
Advances in Mechanical Engineering, Vol 9 (2017)
This study examines the possibility of fabricating a complex, non-cylindrical, Pelton turbine bucket by centrifugal casting technique. Oil hardening non-shrinking die steel material was selected for the permanent mould production, machined with compu
Externí odkaz:
https://doaj.org/article/266557c1d8c24367be3433745563b3a0