Zobrazeno 1 - 10
of 15
pro vyhledávání: '"Francisco Javier Pérez-Trujillo"'
Autor:
Víctor Encinas-Sánchez, Antonio Macías-García, Gustavo García-Martín, Francisco Javier Pérez Trujillo, Jesús Manuel Rodríguez-Rego
Publikováno v:
Journal of Sol-Gel Science and Technology. 106:816-826
The ferritic-martensitic 9Cr-1Mo steel was coated with a sol-gel ZrO2-3%molY2O3 solution by dip-coating. The protective properties of the coating were evaluated in contact with Solar Salt for CSP applications. The coated and uncoated steels were test
Publikováno v:
Ingeniería e Investigación, Vol 34, Iss 2, Pp 5-10 (2014)
Aluminum-silicon coatings were deposited onto stainless steels AISI 304 and AISI 317. The deposition was performed at 540°C with a ratio of active gases HCl/H2 of 1/15.3; argon was used as a carrier gas. The bed of the FBR-CVD process consisted of 2
Externí odkaz:
https://doaj.org/article/57fe9e78a0d84e4d9f27f11326a56fa4
Autor:
José-Luddey Marulanda-Arévalo, Francisco-Javier Pérez-Trujillo, Saúl-Isaac Castañeda-Quintana
Publikováno v:
CT&F Ciencia, Tecnología & Futuro, Vol 5, Iss 4, Pp 75-84 (2014)
Aluminum coatings have been obtained using the Chemical Vapor Deposition of Fluidized Bed Reactor technique (CVD-FBR), on austenitic stainless steels (AISI 304, AISI 316 and AISI 317), in order to evaluate resistance to steam oxidation at 700ºC. The
Externí odkaz:
https://doaj.org/article/8216bc01919b4ccd8cd4c06c9e8b0894
Publikováno v:
Revista Facultad de Ingeniería, Vol 22, Iss 34, Pp 63-70 (2013)
Los recubrimientos de aluminio-silicio fueron depositados sobre el acero inoxidable AISI 316 mediante deposición química de vapor en lecho fluidizado (CVD-FBR), en el rango de temperaturas de 540 a 560 ºC, utilizando un lecho formado por 2,5 g de
Externí odkaz:
https://doaj.org/article/c1ef8c175bf0423ab65e9a8ce5b01419
Autor:
Babak Omranpour Shahreza, Jacques Huot, Maksim Antonov, Lembit Kommel, Fjodor Sergejev, Francisco Javier Pérez Trujillo, Anita Heczel, Jenő Gubicza
Publikováno v:
International Journal of Refractory Metals and Hard Materials
This article studies the evolution of microstructure and the wear resistance in tantalum processed by a newly developed Severe Plastic Deformation (SPD) technique called Indirect Extrusion Angular Pressing (IEAP). The microstructure and tribological
Autor:
Jaqueline Saavedra Rueda, Juan Carlos Amézquita García, Laura María Díaz Burgos, Dionisio Laverde Cataño, Francisco Javier Bolívar Osorio, Francisco Javier Pérez Trujillo
Publikováno v:
Ciencia e Ingeniería Neogranadina, Vol 20, Iss 2, Pp 19-30 (2010)
La pirólisis de hidrocarburos es un proceso que se caracteriza por llevarse a cabo durante largos períodos de tiempo a temperaturas superiores a los 843° C y atmósferas altamente reductoras. Dichas condiciones severas contribuyen al deterioro por
Externí odkaz:
https://doaj.org/article/51aad74883df46ddaece0c3dc2c15475
Autor:
M.I. Lasanta, María Teresa de Miguel, Andre Illana Sánchez, Gustavo García-Martín, Francisco Javier Pérez-Trujillo
Publikováno v:
Energies
Volume 14
Issue 18
Energies, Vol 14, Iss 5903, p 5903 (2021)
Volume 14
Issue 18
Energies, Vol 14, Iss 5903, p 5903 (2021)
Ternary low melting point mixtures with the addition of LiNO3 and Ca(NO3)2 have been presented as direct system candidates for CSP technologies due to having better physical and chemical properties than those of Solar Salt. In this study, thermal, ph
Autor:
María Teresa de Miguel, Arutiun P. Ehiasarian, Papken Eh. Hovsepian, Andrea Illana, M.I. Lasanta, S. Mato, Yashodhan Purandare, Francisco Javier Pérez-Trujillo
The main objective of this work was to evaluate the oxidation resistance of three PVD-HIPIMS CrN/NbN coatings, studying the effect of the surface finishing of the substrate and the role of niobium content into the coating composition. CrN/NbN nano-mu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::25309f45dd4ec224fa89a1ddd665dfa7
Autor:
Francisco-Javier Pérez-Trujillo, Saúl-Isaac Castañeda-Quintana, José Luddey Marulanda-Arévalo
Publikováno v:
CT&F - Ciencia, Tecnología y Futuro. 5:75-84
Aluminum coatings have been obtained using the Chemical Vapor Deposition of Fluidized Bed Reactor technique (CVD-FBR), on austenitic stainless steels (AISI 304, AISI 316 and AISI 317), in order to evaluate resistance to steam oxidation at 700oC. The
Autor:
Ricardo Díaz Martín, Moises Diaz, Francisco Javier Pérez Trujillo, Francisco Perez, Adib Guardiola Mouhaffel
Publikováno v:
R-USJ: Repositorio Institucional de la Universidad San Jorge
Universidad San Jorge (USJ)
E-Prints Complutense: Archivo Institucional de la UCM
Universidad Complutense de Madrid
Sustainability
Volume 11
Issue 3
E-Prints Complutense. Archivo Institucional de la UCM
instname
Sustainability, Vol 11, Iss 3, p 599 (2019)
Universidad San Jorge (USJ)
E-Prints Complutense: Archivo Institucional de la UCM
Universidad Complutense de Madrid
Sustainability
Volume 11
Issue 3
E-Prints Complutense. Archivo Institucional de la UCM
instname
Sustainability, Vol 11, Iss 3, p 599 (2019)
We analyze the energy consumption of domestic hot water (DHW) in the hotels of the archipelago of the Canary Islands (Spain). Currently, systems use fossil fuels of propane and gas oil. However, this paper analyzes several alternative systems which f