Zobrazeno 1 - 10
of 2 611
pro vyhledávání: '"Forming limit diagram"'
Publikováno v:
Journal of Materials Research and Technology, Vol 31, Iss , Pp 3453-3465 (2024)
Composite metal sheets have found extensive applications thanks to their high corrosion and wear resistance, as well as greater strength, stiffness, and formability relative to the base sheets. Stainless steel composite sheets account for over 80% of
Externí odkaz:
https://doaj.org/article/60801befefd34e88a30468097f710c51
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 9325-9336 (2024)
This study explored the efficacy of electromagnetic forming in addressing the limited formability of aluminum–Lithium (AlLi) alloy at room temperature, focusing on the AA2195-T4 sheet. Comparative analyses were conducted to assess the formability.
Externí odkaz:
https://doaj.org/article/3bcb5976a6994c1fbbf1a5b7bd3ecd95
Autor:
Adrià Gallifa-Terricabras, Joanna Sylwia Swieszek, Dorota Smakulska, Berta Ruiz-Palenzuela, Marco Garlaschè
Publikováno v:
Materials & Design, Vol 244, Iss , Pp 113191- (2024)
Coated superconducting radio-frequency (SRF) cavities are planned to be implemented in the Future Circular Collider (FCC) at the European Organization for Nuclear Research (CERN). The interest in industrialized and high-performance processes for fabr
Externí odkaz:
https://doaj.org/article/81eb82acfdf3482d8d4b574f345496f9
Publikováno v:
International Journal of Emerging Engineering and Technology, Vol 3, Iss 1 (2024)
The multifunctional structure, i.e., multilayer sandwich panel (MLSP), exhibits properties like high rigidity, good specific strength, and lightweight and thermal resistance. Structural performance is attributed to these properties, making MLSP very
Externí odkaz:
https://doaj.org/article/0b2fc49c31d946479025988aeea5f423
Publikováno v:
Journal of Applied Science and Engineering, Vol 27, Iss 4, Pp 2265-2273 (2024)
In this study, the appropriateness of the forming limit stress diagram and the forming limit diagram for predicting the formability of sheets of AISI 304 steel is compared. The Forming Limit Diagram was plotted using a numerical technique and the Nak
Externí odkaz:
https://doaj.org/article/02dccf2835f04b0d8711bbff94c83f5f
Publikováno v:
Chinese Journal of Mechanical Engineering, Vol 36, Iss 1, Pp 1-10 (2023)
Abstract The forming limit diagram plays an important role in predicting the forming limit of sheet metals. Previous studies have shown that, the method to construct the forming limit diagram based on instability theory of the original shear failure
Externí odkaz:
https://doaj.org/article/8ea7a1878c984a019a6a5d78a54c0843
Autor:
S. I. Feoktistov, I. K. Andrianov
Publikováno v:
Advanced Engineering Research, Vol 23, Iss 1, Pp 7-16 (2023)
Introduction. The modern development of stamping aircraft manufacturing is inextricably linked with the assessment of the limiting capabilities of sheet blanks. However, the issue of defect-free forming of blanks made of aviation aluminum alloys is u
Externí odkaz:
https://doaj.org/article/d0900ada89f54ea49ac8678ec37e3e2b
Autor:
Marwan T. Mezher, Rusul Ahmed Shakir
Publikováno v:
Results in Engineering, Vol 20, Iss , Pp 101613- (2023)
In the single point incremental hole flanging (SPIHF) process, a sheet material with pre-cut holes is deformed using the SPIF technique to generate a flange, making it an effective approach for low volume manufacturing and quick prototyping. In the c
Externí odkaz:
https://doaj.org/article/65bab1ef6b80436dbb714db68bdfd4b1
Publikováno v:
Journal of Materials Research and Technology, Vol 23, Iss , Pp 5318-5328 (2023)
In this research, the experimental investigation of the change of the strain path on the microstructure, mechanical properties and the forming limit diagram of Al/Mg two-layer sheet made by roll bonding method has been performed. This research tries
Externí odkaz:
https://doaj.org/article/3b7f3a01af1845cdac9efc7735366565
Publikováno v:
Metals, Vol 14, Iss 5, p 561 (2024)
Hot-forming technology for 22MnB5 hot-forming steel (22MnB5 HF steel) plates has been widely used in the automobile manufacturing industry in recent years. Physical simulation and numerical modeling were carried out in order to determine the forming
Externí odkaz:
https://doaj.org/article/24b2a82049d143c588d14691dc771974