Zobrazeno 1 - 10
of 12
pro vyhledávání: '"Florian Planitzer"'
Autor:
Armin Holzner, Thomas Koch, Vasiliki-Maria Archodoulaki, Florian Planitzer, Franziska Stadlbauer, Wolfgang Fidi
Publikováno v:
Materials, Vol 6, Iss 12, Pp 5502-5516 (2013)
Materials
Materials; Volume 6; Issue 12; Pages: 5502-5516
Materials
Materials; Volume 6; Issue 12; Pages: 5502-5516
Loading parameters (frequency, amplitude ratio and waveform) are varied to determine their influence on fatigue crack growth in rubber. Up to three different rubber blends are investigated: one actual engineering material and two model materials. Fat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4eeb60542f2408d5db693ac864297e1a
http://www.mdpi.com/1996-1944/6/12/5502
http://www.mdpi.com/1996-1944/6/12/5502
Autor:
Wolfgang Fidi, Franziska Stadlbauer, Vasiliki-Maria Archodoulaki, Florian Planitzer, Thomas Koch
Publikováno v:
Polymer Testing. 32:1045-1051
A novel measurement setup is developed to determine fatigue crack growth and heat build-up in rubber. Loading conditions include tensile and compressional loads. Deviations in the crack shape are detected with special features (swivel arm and additio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::08b607cc4ded5b320c39fedbb3482e10
https://doi.org/10.1016/j.polymertesting.2013.06.003
https://doi.org/10.1016/j.polymertesting.2013.06.003
Autor:
Thomas Hatzenbichler, Roman Pschera, Otto-Karl Harrer, Florian Planitzer, Stefan Wallner, Mario Kuss, Bruno Buchmayr
Publikováno v:
Tribology International. 49:75-79
In FEM simulations contact in conjunction with plastic material behaviour leads to highly nonlinear equations in the FEM algorithms. This causes problems in numerical convergence. FEM-software providers handle this problem by automatic contact dampin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e5eb0489465f9c4ff6005318a98a1948
https://doi.org/10.1016/j.triboint.2011.12.020
https://doi.org/10.1016/j.triboint.2011.12.020
Publikováno v:
International Journal of Material Forming. 2:93-96
Because of its capability for net- or near-net shape production, P/M technology is well suited for the production of complex shapes such as gears. Nevertheless, the usage of P/M parts has been limited for a long time on low to moderate stress applica
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::33c1a80dc04133ad115cb814725943b8
https://doi.org/10.1007/s12289-009-0421-0
https://doi.org/10.1007/s12289-009-0421-0
Publikováno v:
BHM Berg- und Hüttenmännische Monatshefte. 153:430-434
Pulvermetallurgische Bauteile werden zunehmend fur Hochleistungskomponenten wie Getriebezahnrader verwendet. Weil die Festigkeit von Sinterbauteilen von deren Porositat bestimmt wird, ist es notwendig, die Dichte von Sinterbauteilen auf Werte nahe de
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8f692d4f9bb8a4a02c54f68a4d3b82b1
https://doi.org/10.1007/s00501-008-0417-y
https://doi.org/10.1007/s00501-008-0417-y
Autor:
Thomas Hatzenbichler, Reinhold Ebner, Sven Eck, Florian Planitzer, Anton Ishmurzin, Thomas Wlanis
Publikováno v:
International Journal of Computational Materials Science and Surface Engineering. 5:16
The primary purpose of case hardening is to provide a hard, wear and fatigue resistant surface while maintaining a soft ductile core. PM structural parts play an increasing role in the automotive industry, especially for complex shaped parts like gea
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::88d90b2bca92c5629540e49e600ac896
https://doi.org/10.1504/ijcmsse.2012.049051
https://doi.org/10.1504/ijcmsse.2012.049051
Autor:
Stadlbauer, Franziska1 franziska.stadlbauer@tuwien.ac.at, Koch, Thomas1 thomas.koch@tuwien.ac.at, Archodoulaki, Vasiliki-Maria1 vasiliki-maria.archodoulaki@tuwien.ac.at, Planitzer, Florian2 florian.planitzer@semperit.at, Fidi, Wolfgang2 wolfgang.fidi@semperit.at, Holzner, Armin2 armin.holzner@semperit.at
Publikováno v:
Materials (1996-1944). Dec2013, Vol. 6 Issue 12, p5502-5516. 15p. 1 Chart, 10 Graphs.
Publikováno v:
International Journal of Material Forming; Aug2009 Supplement 1, Vol. 2, p93-96, 4p
Publikováno v:
BHM Berg- und Hüttenmännische Monatshefte; Nov2008, Vol. 153 Issue 11, p430-434, 5p
Publikováno v:
BHM Berg- und Hüttenmännische Monatshefte; May2008, Vol. 153 Issue 5, p193-203, 11p