Zobrazeno 1 - 10
of 74
pro vyhledávání: '"Florian Lacroix"'
Autor:
Daphné Berthier, Marie-Pierre Deffarges, Nicolas Berton, Mathieu Venin, Florian Lacroix, Bruno Schmaltz, Yohan Tendron, Eric Pestel, François Tran-Van, Stéphane Méo
Publikováno v:
Materials, Vol 11, Iss 8, p 1358 (2018)
The present study reports on the use of three types of polyhedral oligomeric silsesquioxanes (POSS) nanoparticles with various organic substituents as fillers in a fluoroelastomer (FKM). A series of/POSS elastomer composite thin films is prepared. Mi
Externí odkaz:
https://doaj.org/article/a4378dad79194c5f9956b11ff7e257f3
Publikováno v:
Rubber Chemistry and Technology
Rubber Chemistry and Technology, American Chemical Society, 2021, ⟨10.5254/rct.21.79993⟩
Rubber Chemistry and Technology, American Chemical Society, 2021, ⟨10.5254/rct.21.79993⟩
Various research is covering instrumented nano-indentation in the literature. However, studies on this characterization test remain limited when it comes to the local mechanical behavior of elastomeric materials. The application of nano-indentation o
Publikováno v:
Journal of Materials Engineering and Performance
Journal of Materials Engineering and Performance, Springer Verlag/ASM International, In press
Journal of Materials Engineering and Performance, 2020, 29 (3), pp.1984-1994. ⟨10.1007/s11665-020-04709-w⟩
Journal of Materials Engineering and Performance, Springer Verlag/ASM International, In press
Journal of Materials Engineering and Performance, 2020, 29 (3), pp.1984-1994. ⟨10.1007/s11665-020-04709-w⟩
International audience; In this work, two copper metal matrix composites (MMCs) reinforced with 20 wt.% of Ti(C,N) or Ti2AlN particles were studied. The reinforcement particles were synthesized by flash sintering under 2 bar nitrogen atmosphere causi
Autor:
Didier Picart, Michael Caliez, Arnaud Frachon, Michel Gratton, Florian Lacroix, Marwen Chatti, Nourredine Aït Hocine
Publikováno v:
International Journal of Energetic Materials and Chemical Propulsion
International Journal of Energetic Materials and Chemical Propulsion, 2021, 20 (2), pp.87-108. ⟨10.1615/IntJEnergeticMaterialsChemProp.2021037739⟩
International Journal of Energetic Materials and Chemical Propulsion, 2021, 20 (2), pp.87-108. ⟨10.1615/IntJEnergeticMaterialsChemProp.2021037739⟩
International audience; This paper presents an original experimental study and modeling of the failure under multiaxial loading of a simulant material for plastic-bonded explosives. Measurements were obtained using tension, compression, torsion, chan
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a5f6c1453a11a52bebff517fbc9dab1c
https://hal.archives-ouvertes.fr/hal-03252975
https://hal.archives-ouvertes.fr/hal-03252975
Autor:
Armen Amirkhanian, Serji Amirkhanian, Jim Anderson, Denise Bellisario, Krishna Prapoorna Biligiri, Jean Paul Bouysset, Moises Bueno, Enrico Catizzone, K.J. Collins, Giacinto Cornacchia, Davide Dalmazzo, Wilma Dierkes, Nicolas Evans, D. Elroy Fimrite, Valentí Fontserè, Cesare Freda, Simon Hodson, Xiangdao Hou, C. Gisèle Jung, Amanda Koh, Florian Lacroix, Jin Li, Frank Lindner, Davide Lo Presti, Juan Daniel Martínez, Carl D. McAfee, Juan Gallego Medina, Miquel Morata, Ettore Musacchi, Kyriacos Neocleous, Alexander Paasche, Jorge Carvalho Pais, Joan Peset, Kypros Pilakoutas, Thomaida Polydorou, Lily Poulikakos, Fabrizio Quadrini, Sitisaiyidah Saiwari, Ezio Santagata, Loredana Santo, Said Seghar, Valerie L. Shulman, Eleanor Skelton, Peter Taylor, Tao Wang, Feipeng Xiao, Qidi Zong
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::01138306f55f46cfccc9bf42d91ed326
https://doi.org/10.1016/b978-0-12-820685-0.00021-1
https://doi.org/10.1016/b978-0-12-820685-0.00021-1
Autor:
Guillaume Kermouche, C. Fradet, Jean-Luc Loubet, Jean-Michel Bergheau, Gaylord Guillonneau, E. Le Bourhis, Florian Lacroix, Paul Baral
Publikováno v:
ACS Applied Materials & Interfaces
ACS Applied Materials & Interfaces, Washington, D.C. : American Chemical Society, 2020, 12 (5), pp.6716-6726. ⟨10.1021/acsami.9b20286⟩
ACS Applied Materials & Interfaces, Washington, D.C. : American Chemical Society, 2020, 12 (5), pp.6716-6726. ⟨10.1021/acsami.9b20286⟩
International audience; A novel extrinsic method for the measurement of particle surface distribution in a carbon black-filled elastomer via nanoindentation is developed. This method is based on the measurement of the contact stiffness obtained from
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b35d413e28c8ae990795ead3862e7cfb
https://hal.archives-ouvertes.fr/hal-02481338
https://hal.archives-ouvertes.fr/hal-02481338
Publikováno v:
Polymer Testing
Polymer Testing, Elsevier, 2019, pp.106278. ⟨10.1016/j.polymertesting.2019.106278⟩
Polymer Testing, Elsevier, 2019, pp.106278. ⟨10.1016/j.polymertesting.2019.106278⟩
Instrumented Indentation Testing is applied on a fluoroelastomer so as to get information about the local mechanical response of such a rubbery material. Due to their viscoelasticity, elastomers exhibit a time-dependence, responsible for a variation
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c53a37ad093a9f9691ef9c6e2c3892b8
https://hal.archives-ouvertes.fr/hal-02399040
https://hal.archives-ouvertes.fr/hal-02399040
Modeling of the thermomechanical behavior of rubbers during fatigue tests from infrared measurements
Publikováno v:
International Journal of Fatigue
International Journal of Fatigue, Elsevier, 2019, ⟨10.1016/j.ijfatigue.2019.04.035⟩
International Journal of Fatigue, Elsevier, 2019, ⟨10.1016/j.ijfatigue.2019.04.035⟩
This paper presents the establishment of an equation fitting the evolution of the self-heating of a polychloroprene rubber (CR) and a natural rubber (NR) during uniaxial fatigue tests. For the CR, dumbbell shaped samples underwent a wide range of loa
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::020b751a74316054dd12ef080f2cc8d5
https://hal.archives-ouvertes.fr/hal-02126778
https://hal.archives-ouvertes.fr/hal-02126778
Publikováno v:
International Journal of Fatigue
International Journal of Fatigue, Elsevier, 2015, ⟨10.1016/j.ijfatigue.2015.11.026⟩
International Journal of Fatigue, Elsevier, 2015, ⟨10.1016/j.ijfatigue.2015.11.026⟩
International audience; Fatigue damage tests were carried on polychloroprene rubber using a loading sequence with alternate blocks of two force amplitudes, one being damaging and the other not, and carried until the failure of the dumbbell-shaped sam
Publikováno v:
International Journal of Solids and Structures
International Journal of Solids and Structures, Elsevier, 2016, ⟨10.1016/j.ijsolstr.2016.03.010⟩
International Journal of Solids and Structures, 2016, ⟨10.1016/j.ijsolstr.2016.03.010⟩
International Journal of Solids and Structures, Elsevier, 2016, ⟨10.1016/j.ijsolstr.2016.03.010⟩
International Journal of Solids and Structures, 2016, ⟨10.1016/j.ijsolstr.2016.03.010⟩
International audience; This work focuses on the characterization and the modeling of the complex dynamical behavior of a butadiene rubber filled with carbon black. This material is used in helicopter rotors and submitted to severe operating conditio