Zobrazeno 1 - 10
of 123
pro vyhledávání: '"Fengcang Ma"'
Publikováno v:
Journal of Materials Research and Technology, Vol 27, Iss , Pp 3825-3834 (2023)
Cu–Cr–Ti alloy was successfully prepared by vacuum melting, solution treatment at 960 °C for 1 h, 80 % cold rolling and aging at 500 °C for 1 h. The effect of Ti content on the microstructure was characterized by Scanning electron microscope (S
Externí odkaz:
https://doaj.org/article/8ef6803a9edd4bc79cc50106a76838e6
Autor:
Lili Li, Jianghui Zhao, Fengcang Ma, Daihua He, Ping Liu, Wei Li, Ke Zhang, Xiaohong Chen, Lin Song
Publikováno v:
Journal of Materials Science: Materials in Medicine, Vol 34, Iss 10, Pp 1-6 (2023)
Abstract In this study, ICA@Mg-ZIF-8 was synthesized by Mg doping in ZIF-8 and loaded with icariin (ICA). The morphologies and phases were observed and analyzed by SEM, XRD, and the release behaviors of Mg, Zn ions and ICA were tested. Its antibacter
Externí odkaz:
https://doaj.org/article/d32b99ec7a2e4738a033dbff2b7f329f
Publikováno v:
Journal of Materials Research and Technology, Vol 25, Iss , Pp 13-24 (2023)
Grain boundary engineering (GBE) is designed for metals to optimize the grain boundary characteristics and improve their resistance to intergranular corrosion (IGC). In this study, the effect of various GBE processing on the fraction of low ΣCSL gra
Externí odkaz:
https://doaj.org/article/1450aa860cfa4bf18d4b8689e663c271
Autor:
Shengcai Qi, Binbin Kang, Chao Yao, Dongmei Lan, Xiaohong Chen, Fengcang Ma, Ping Liu, Yuehua Liu
Publikováno v:
Materials & Design, Vol 234, Iss , Pp 112312- (2023)
Peri-implantitis is a highly prevalent disease caused by bacterial plaque that results in inflammation. The disease starts from the soft tissue and gradually spreads to the hard tissue around the implant. If left untreated, it can lead to decreased b
Externí odkaz:
https://doaj.org/article/b637f75d6f9644f5926e62fb544821eb
Autor:
Chao Zhou, Jingjing Wang, Jia Meng, Wei Li, Ping Liu, Ke Zhang, Fengcang Ma, Xun Ma, Rui Feng, Peter K. Liaw
Publikováno v:
Materials & Design, Vol 222, Iss , Pp 111097- (2022)
A series of TiN/AlN-Ni multilayer films with different modulation layer thicknesses were prepared by magnetron sputtering. Their microstructures and mechanical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SE
Externí odkaz:
https://doaj.org/article/13a6789981324b4c85644546e30ff4f4
Publikováno v:
Materials, Vol 16, Iss 6, p 2472 (2023)
Thermal processing is a useful method for improving the strengthening effects of fibers used to reinforce metal matrix composites (MMCs), but the corresponding models have not been constructed. In this work, a Ti matrix composite (TMC) reinforced by
Externí odkaz:
https://doaj.org/article/12c56bfdb7934035a3d50c051a17de0f
Publikováno v:
Materials & Design, Vol 203, Iss , Pp 109553- (2021)
The multi-component (AlCrTiZrMo)-Six-N high-entropy films with different silicon contents were deposited on the silicon substrate by magnetron sputtering. The influence of silicon contents on the structures and properties of the films was studied by
Externí odkaz:
https://doaj.org/article/c191fdd8354e46a690fc2bcd7c058b85
Autor:
Qingqing Zhai, Wei Li, Ping Liu, Wenjie Cheng, Ke Zhang, Fengcang Ma, Xiaohong Chen, Rui Feng, Peter K. Liaw
Publikováno v:
Crystals, Vol 12, Iss 2, p 232 (2022)
A new type of high-entropy alloy, a nitride-based (AlCrTiZrMo)N/ZrO2 nano-multilayered film, was designed to investigate the effect of ZrO2 layer thickness on the microstructure, mechanical properties, and thermal stability. The results show that whe
Externí odkaz:
https://doaj.org/article/a1ec58b37a7c4fb49124d2506aa1c148
Publikováno v:
Frontiers in Materials, Vol 7 (2020)
Microstructure and properties of a metastable β-type Ti-35Nb-2Ta-3Zr alloy after cold rolling plus annealing at various temperatures were investigated systematically. The X-ray diffraction results show that the sample annealed at 923 K is mainly com
Externí odkaz:
https://doaj.org/article/8ee92820b12146f99f2d20dc6db925d6
Publikováno v:
Scientific Reports, Vol 7, Iss 1, Pp 1-10 (2017)
Abstract Currently, the arguments have existed in the strengthening mechanism and microstructural model of the nanocomposite film due to lack of the convincible experimental evidences. In this investigation, the quarternary TiSiCN nanocomposite films
Externí odkaz:
https://doaj.org/article/261ef31fe79a40f6b904806677ef6238