Zobrazeno 1 - 7
of 7
pro vyhledávání: '"Federico Lupone"'
Publikováno v:
Journal of Composites Science, Vol 7, Iss 9, p 367 (2023)
Fused Deposition Modeling (FDM) enables many advantages compared to traditional manufacturing techniques, but the lower mechanical performance due to the higher porosity still hinders its industrial spread in key sectors like the automotive industry.
Externí odkaz:
https://doaj.org/article/b038ca688fa14d028bd8c082c3608787
Publikováno v:
Materials & Design, Vol 193, Iss , Pp 108869- (2020)
An innovative manufacturing method, based on Fused Deposition Modelling (FDM) and Laser Writing (LW) technologies, was developed to integrate electrically conductive tracks within high strength 3D printed parts. Carbon fibers reinforced polyamide com
Externí odkaz:
https://doaj.org/article/26b76f45e1624963955ad0e3cd716971
Publikováno v:
Polymers, Vol 14, Iss 3, p 426 (2022)
The development of 3D printed composites showing increased stiffness and strength thanks to the use of continuous carbon fibers has offered new prospects for Fused Filament Fabrication (FFF) technique. This work aims to investigate the microstructure
Externí odkaz:
https://doaj.org/article/71aff642f62a4ce8baf904c8cac436d9
Publikováno v:
Materials, Vol 15, Iss 1, p 183 (2021)
Selective laser sintering (SLS) is a powder bed fusion technology that uses a laser source to melt selected regions of a polymer powder bed based on 3D model data. Components with complex geometry are then obtained using a layer-by-layer strategy. Th
Externí odkaz:
https://doaj.org/article/86066ffec7f642ad937f5c8e96bf5cd8
Autor:
Oxana Ostrovskaya, Elisa Padovano, Federico Lupone, Claudio Francesco Badini, S. Giudice, Mario Pietroluongo
Publikováno v:
eXPRESS Polymer Letters, Vol 15, Iss 2, Pp 177-192 (2021)
The optimization of process parameters represents one of the major drawbacks of selective laser sintering (SLS) technology since it is largely empirical and based on performing a series of trial-and-error builds. This approach is time consuming, cost
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a82b3a4f0d755f68a3c86e8e3fa3faed
https://doi.org/10.3144/expresspolymlett.2021.16
https://doi.org/10.3144/expresspolymlett.2021.16
Publikováno v:
Materials, Vol 15, Iss 183, p 183 (2022)
Materials
Materials
Selective laser sintering (SLS) is a powder bed fusion technology that uses a laser source to melt selected regions of a polymer powder bed based on 3D model data. Components with complex geometry are then obtained using a layer-by-layer strategy. Th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::63bc7758e2b9c6bf18fdcc7f4ad10a5f
http://hdl.handle.net/11583/2952105
http://hdl.handle.net/11583/2952105
Innovative approach to the development of conductive hybrid composites for Selective Laser Sintering
Autor:
Oxana Ostrovskaya, Alessandro Russo, Elisa Padovano, Federico Lupone, Claudio Francesco Badini
Selective Laser Sintering (SLS) was used to manufacture electrically conductive polymer composites made of polyamide 12 reinforced with carbon fibres and graphite (PA12/CF/GP). Since material design is critical in developing conductive polymer compos
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::49dd1b535dd16a5f65c2c848763ad3df
http://hdl.handle.net/11583/2951792
http://hdl.handle.net/11583/2951792