Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Farid Majedi"'
Publikováno v:
Jurnal Ilmiah SINERGI, Vol 26, Iss 3, Pp 303-310 (2022)
Alternative fuels such as vegetable oil, biodiesel, and bio-oil are potential alternatives for diesel engines. Bio-oil is one of the products of the decomposition process of chemical and organic matter by adding heating process without oxygen is call
Externí odkaz:
https://doaj.org/article/898a655c241b4d1eab35d3b213c432a3
Publikováno v:
Automotive Experiences, Vol 3, Iss 1 (2020)
On a single-cylinder diesel engine, injection pressure can be adjusted by changing the thickness of the injector shim. In this study, the injection pressure of 180 bar (standard), 190 bar (+1mm shim), and 210 bar (+2mm shim) was examined on a typical
Externí odkaz:
https://doaj.org/article/e682593dfec0421f84c2aef3320699d1
Publikováno v:
Rotor: Jurnal Ilmiah Teknik Mesin, Vol 9, Iss 2, Pp 59-64 (2016)
Product pyrolysis process is char, tar and gas. Char important parameters are the mass and caloric value. Therefore, this study discusses the effect of temperature and heating rate due the mass and low heating value. Variations heating rate used was
Externí odkaz:
https://doaj.org/article/969d086df2964758a7db10f06c0ce1cc
Publikováno v:
Jurnal Teknologi, Vol 11, Iss 2, Pp 91-96 (2019)
Pertumbuhan penduduk berbanding lurus dengan peningkatan kebutuhan energi. Konsumsi bahan bakar minyak di Indonesia yang mencapai 586 juta barrel pada tahun 2014. Cadangan minyak bumi yang di dalam perut bumi semakin menipis dan terancam habis. Arang
Autor:
Edi Murnawan, Farid Majedi
Publikováno v:
JTT (Jurnal Teknologi Terpadu). 7:23-28
The increasing number of automotive technology and vehicle cause using fossil fuel also rises. So it is needed alternative fuel as replacement or mixing of the fuel, for keeping the existence so that the crisis of fuel will not happen. Bio-oil is a p
Publikováno v:
Automotive Experiences, Vol 3, Iss 1 (2020)
On a single-cylinder diesel engine, injection pressure can be adjusted by changing the thickness of the injector shim. In this study, the injection pressure of 180 bar (standard), 190 bar (+1mm shim), and 210 bar (+2mm shim) was examined on a typical
Publikováno v:
JEECAE (Journal of Electrical, Electronics, Control, and Automotive Engineering). 3:163-166
— Efisiensi volumetrik motor 4 langkah pada dasarnya tidak mencapai 100% tetapi hanya berkisar antara 65-85%. Hal ini di pengaruhi oleh Tipe bahan bakar, air/fuel ratio, Temperatur campuran udara-bahan bakar, Compression rati o, Putaran mesin, Desa
Autor:
Fredy Susanto, Farid Majedi
Publikováno v:
Jurnal Poli-Teknologi. 17
Petroleum reserves are running low. To solve this problem by optimizing the use of petroleum products, used ethanol for gasoline replacement. The motor is modified so that the use of ethanol as a substitute for gasoline can be done. This study aims t
Publikováno v:
Journal of Physics: Conference Series. 1845:012001
Pyrolysis is a decomposition process chemical ingredient by adding the heating process without oxygen, where is the raw material/biomass will experience the breakdown of chemical structures to the gas phase. It produced char, tar, and gas. This resea
Publikováno v:
Journal of Physics: Conference Series. 1845:012037
Railway axle and railway bearing are critical railway components. It is needed a method to analyse them. In this work, static and dynamic analysis are presented. Static analysis is presented by analyzing the design of railway axle through finite elem