Zobrazeno 1 - 10
of 62
pro vyhledávání: '"Fangjun Jin"'
Autor:
Lei Wang, Fangjun Jin, Jiawei Chen, Yang Gao, Xin Du, Zhihong Zhang, Zhiliang Xu, Jiongming Yang
Publikováno v:
IET Renewable Power Generation, Vol 16, Iss 8, Pp 1636-1648 (2022)
Abstract To stabilize the power out and reduce the dynamic loads in the over‐rated state, the pitch system is key for regulating pitch angle to the desired one obtained from the command layer. Here, actuator failure of the pitch system is considere
Externí odkaz:
https://doaj.org/article/122a61ac62454f92abfb75b7b6da36bb
Publikováno v:
Catalysts, Vol 13, Iss 7, p 1054 (2023)
Ba0.5Sr0.5FeO3−δ (BSF) nanofibers are prepared via electrospinning and sintering at a temperature of 800 °C for 2 h to produce a pure cubic perovskite phase, with the aim of finding a high-performance cathode material suitable for proton-conducti
Externí odkaz:
https://doaj.org/article/46c116c31c514cacb170931ba28ed0d5
Publikováno v:
Catalysts, Vol 13, Iss 1, p 182 (2023)
Fuel electrode-supported tubular protonic ceramic cells (FETPCCs) based on the BaZr0.4Ce0.4Y0.15Zn0.05O3−δ (BZCYZ) membrane electrolyte was fabricated through a two-step method, in which the polyporous electrode-support tube was prepared with a tr
Externí odkaz:
https://doaj.org/article/aca98334966740c8beb057e5d7c31c05
Autor:
Yang Yang, Zhengpeng Chen, Mingfei Li, Muming Rao, Fangjun Jin, Yihan Ling, Peizhong Feng, Shaorong Wang
Publikováno v:
Journal of Materials Chemistry A. 11:7995-8002
A-Site substitution with bismuth promotes the oxygen vacancy formation in layered perovskite electrodes, which further enhances the electrochemical performance of symmetrical solid oxide fuel cells.
Publikováno v:
Journal of Materials Science: Materials in Electronics. 33:15754-15762
Publikováno v:
Ceramics International. 47:33886-33896
The high performance and robust durability of electrode materials are crucial requirements for intermediate-temperature solid oxide fuel cells. This study prepared a new type of Nd1−xBaCo2O5+δ+x/2Bi2O3 (x = 0.05, 0.1; NBC95+B, NBC90+B) composite c
Autor:
Fang Wang, Yu Shen, Ning Sun, Xianglin Liu, Jiangxin Li, Jinhua Li, Fangjun Jin, Xueying Chu, Xiaowei Liu, Xiaoling Lv, Zhe Wu
Publikováno v:
ACS Applied Energy Materials. 4:7992-8002
Autor:
Lei Zhang, Xiaogang Su, Hongdong Cai, Shibo Wang, Li Wang, Wen Long, Jingsheng Xu, Xu Han, Ming Wu, Fangjun Jin, Leilei Zhang, Ning Sun
Publikováno v:
Journal of the European Ceramic Society. 41:2682-2690
Cobalt–free perovskites Ln0.5Sr0.5Fe0.9Mo0.1O3–δ (Ln = lanthanide; LnSFM) were prepared via a sol–gel process. Pure rhombohedral phases were still not obtained for the samples (Ln = Sm and Gd) even sintered at 1300 °C. Thus, only the LaSFM, P
Autor:
Zhongyuan Liu, Cunyin Zhang, Xin Guo, Robert Szczesny, Fangjun Jin, Duncan H. Gregory, Wanqiang Liu, Pan He
Publikováno v:
ACS Applied Materials & Interfaces. 13:13400-13409
Improvements in the thermoelectric performance of n-type Bi2Te3 materials to more closely match their p-type counterparts are critical to promote the continued development of bismuth telluride thermoelectric devices. Here the unconventional heteroato
Publikováno v:
Journal of Materials Chemistry C. 9:6823-6833
The controllability of materials that has attracted widespread attention is a key factor for improving the performance of SERS substrates. Hence, in this study, a kind of controllable materials constructed with Au nano-disk array and monolayer MoS2 h