Zobrazeno 1 - 10
of 29
pro vyhledávání: '"Fan-Lei Wu"'
Autor:
Tsung-Shine Ko, Der-Yuh Lin, You-Chi He, Chen-Chia Kao, Bo-Yuan Hu, Ray-Hua Horng, Fan-Lei Wu, Chih-Hung Wu, Yu-Li Tsai
Publikováno v:
International Journal of Photoenergy, Vol 2015 (2015)
The optoelectric properties of GaInP p-i-n solar cells with different intrinsic layer (i-layer) thicknesses from 0.25 to 1 μm were studied. Both emission intensity and full width at half maximum features of the photoluminescence spectrum indicate th
Externí odkaz:
https://doaj.org/article/1abdb4afdced422b91020bb92781e608
Publikováno v:
Thin Solid Films. 612:36-40
InGaP/GaAs dual-junction solar cells were prepared on p-type GaAs substrates by metalorganic chemical vapor deposition. Three types of front-side electrodes, which included AuGe/Au metal-finger, ITO-finger, and ITO-overcoated, were individually fabri
Publikováno v:
Solar Energy Materials and Solar Cells. 122:233-240
In this study, the epilayer structure of a GaAs solar cell was quickly separated from the GaAs substrate by performing the epitaxial lift-off (ELO) process in hydrofluoric acid (HF) solutions mixed with hydrophilic substances, and the epilayer struct
Publikováno v:
ECS Transactions. 50:361-365
In this study, GaAs epilayer is quickly separated from GaAs substrate by epitaxial lift-off (ELO) process with mixture etchant solution. The HF solution mixes with low surface tension fluid as mixture etchant solution to etch sacrificial layer. The p
Effects of buffer layers and front electrode angles on the performance of In0.16Ga0.84As solar cells
Publikováno v:
2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC).
Three buffer layers, that included 2-step, step-graded, and linear-graded layers, were designed to improve the performance of In 0.16 Ga 0.84 As solar cell. The In 016 Ga 084 As solar cells fabricated on these three buffer layers were denoted as 2S-c
Autor:
Fan-Lei Wu, 吳凡磊
104
In this dissertation, two important techniques were respectively demonstrated for the development of optoelectronic devices. In the first part, the characteristics of different etching solutions applied to the epitaxial lift-off process (ELO
In this dissertation, two important techniques were respectively demonstrated for the development of optoelectronic devices. In the first part, the characteristics of different etching solutions applied to the epitaxial lift-off process (ELO
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/40568191288014695026
Publikováno v:
IEEE Transactions on Electron Devices. 59:666-672
This study reports the use of cross-shaped pattern epitaxial lift-off (ELO) technology to release crack-free single crystal epilayers with a solar cell structure from a gallium arsenide (GaAs) substrate. A cross-shaped pattern array was used to defin
Publikováno v:
Vacuum. 86:843-847
This article reports the quality of In x Ga 1− x As (0 x x Ga 1− x As epilayers is determined by x-ray reciprocal space mapping (RSM). From the RSM results, the crystalline quality of In x Ga 1− x As epilayers grown with small indium compositio
Publikováno v:
IEEE Transactions on Electron Devices. 58:3898-3904
This paper presents the thermal effect on the performance of a GaAs thin-film solar cell with a 50-200- μm-thick copper (Cu) substrate. The GaAs thin-film solar cell is fabricated by transferring a GaAs solar cell on a Cu substrate with a AuGe/Au mi
Publikováno v:
Solid State Phenomena. 170:135-138
The optical anisotropy properties of rhenium disulphide (ReS2) and Au-doped rhenium disulphide (ReS2:Au) have been investigated by polarization-dependent photoluminescence (PL). Because the excitonic transitions show strong polarization dependences i