Zobrazeno 1 - 10
of 61
pro vyhledávání: '"F. Reyes-Calderón"'
Autor:
N. Alcantar-Mondragón, F. Reyes-Calderón, V. García-García, P. Garnica-González, S. Estrada-Hernández
Publikováno v:
Results in Materials, Vol 20, Iss , Pp 100489- (2023)
It is widely known the harmful delta ferrite effect on the mechanical properties of martensitic stainless steel (MSS), especially in the partially melted (PMZ) and heat-affected (HAZ) regions brought about the welding thermal cycle. Therefore, this r
Externí odkaz:
https://doaj.org/article/127307342ac24b04b9be86805a3f5cc6
Autor:
N. Alcantar-Mondragón, F. Reyes-Calderón, V. García-García, O. Vázquez-Gómez, J.M. Salgado-López
Publikováno v:
Journal of Materials Research and Technology, Vol 10, Iss , Pp 1262-1279 (2021)
In this research work, the optimal parameters of post welding heat treatment (PWHT) for 12Cr–1Mo Steel in the welding condition are determined. The PWHT aims to decrease δ-ferrite percentage in the interface of the heat-affected zone (HAZ) and par
Externí odkaz:
https://doaj.org/article/44aad7ff44dc4b57b49351aa13e947f4
Autor:
M. M. Machado López, F. Reyes Calderón, H. J. Vergara Hernández, J. C. Villalobos, M. E. Contreras García
Publikováno v:
Protection of Metals and Physical Chemistry of Surfaces. 57:1251-1261
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e70245b10354bc75dea7b4ec7fd00290
https://doi.org/10.1134/s2070205121060149
https://doi.org/10.1134/s2070205121060149
Autor:
Nereyda Alcantar-Modragón, Víctor García-García, F. Reyes-Calderón, Julio César Villalobos-Brito, Héctor Javier Vergara-Hernández
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 116:2661-2686
Hot cracking susceptibility and the formation of brittle martensite phase are the main factors that limit the weldability of a dissimilar joint between carbon steel (CS) and austenitic stainless steel (SS). In this study, the self-constraint finger t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::756245a88c5acaf54b3da94f0fc2871d
https://doi.org/10.1007/s00170-021-07596-0
https://doi.org/10.1007/s00170-021-07596-0
Autor:
P. Garnica-González, F. Ruiz-León, F. Reyes-Calderón, V. García-García, M. L. Mondragón-Sánchez
Publikováno v:
Journal of Materials Engineering and Performance. 30:3468-3483
The microstructure of the twinning-induced plasticity (TWIP) steel microalloyed by Ti (TWIP-Ti) exhibited a wide grain size distribution after applying a thermomechanical treatment. The presence of fine and coarsest grains affected mechanical twinnin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9df2f7e336d3eca4019d5eadd11c30cd
https://doi.org/10.1007/s11665-021-05701-8
https://doi.org/10.1007/s11665-021-05701-8
Autor:
M. I. Dávila-Pérez, Octavio Vázquez-Gómez, Edgar López-Martínez, J. M. Salgado-López, Héctor Javier Vergara-Hernández, F. Reyes-Calderón
Publikováno v:
Journal of Iron and Steel Research International. 28:729-738
A microstructural analysis was performed to determine the presence of oxygen in a wire rod section of AISI 1008 steel with a surface mechanical failure produced during wire drawing. The failure zone was analyzed by comparison using three different at
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a597b31f75cccd2fbff12feee35033ab
https://doi.org/10.1007/s42243-020-00537-3
https://doi.org/10.1007/s42243-020-00537-3
Autor:
J. M. Salgado-López, V. García-García, Octavio Vázquez-Gómez, F. Reyes-Calderón, N. Alcantar-Mondragón
Publikováno v:
Journal of Materials Research and Technology, Vol 10, Iss, Pp 1262-1279 (2021)
In this research work, the optimal parameters of post welding heat treatment (PWHT) for 12Cr–1Mo Steel in the welding condition are determined. The PWHT aims to decrease δ-ferrite percentage in the interface of the heat-affected zone (HAZ) and par
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a736242c8e79e7d92238faf548dc1975
http://www.sciencedirect.com/science/article/pii/S2238785420321475
http://www.sciencedirect.com/science/article/pii/S2238785420321475
Publikováno v:
UPCommons. Portal del coneixement obert de la UPC
Universitat Politècnica de Catalunya (UPC)
Universitat Politècnica de Catalunya (UPC)
The effect of residual stresses can be beneficial or harmful depending on their magnitude, type and distribution. This research work applied the isotropic and kinematic hardening models with different strain rates (0.001-100 s-1) to simulate the non-
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d17f9d3decc8d68235d19f84ffb181cf
https://doi.org/10.1016/j.jmapro.2020.09.042
https://doi.org/10.1016/j.jmapro.2020.09.042
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 111:1115-1134
This research work developed a decoupled thermo-mechanical-microstructural (TMM) numerical framework to simulate a multi-pass welding process. The numerical framework was applied to evaluate the effect of operating parameters on the weldability of a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6003932f1b83e1a60952585564c50160
https://doi.org/10.1007/s00170-020-06118-8
https://doi.org/10.1007/s00170-020-06118-8
Autor:
R. Vences-Hernández, Héctor Javier Vergara-Hernández, Julio C. Villalobos, J. A. Salazar-Torres, F. Reyes-Calderón
Publikováno v:
Journal of Materials Engineering and Performance. 29:6520-6534
Because of the high demand for dual-phase (DP) steels in the automotive and construction industry, the present investigation focused on evaluating the corrosion resistance of three different commercial DP steels through electrochemical corrosion test
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ef2e67f86804db06986210f6a995bfd1
https://doi.org/10.1007/s11665-020-05175-0
https://doi.org/10.1007/s11665-020-05175-0