Zobrazeno 1 - 10
of 35
pro vyhledávání: '"Edward J. Timm"'
Publikováno v:
Journal of Energy Resources Technology. 138
Approximately, 55% of the energy produced from conventional vehicle resources is lost due to heat losses. An efficient waste heat recovery process will lead to improved fuel efficiency and greenhouse gas emissions. Thermoelectric generators (TEGs) ar
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::78af88d8255969d0da64a65dbe417073
https://doi.org/10.1115/1.4032619
https://doi.org/10.1115/1.4032619
Autor:
Harold Schock, Muhammad Farhan, Eldon D. Case, Mercouri G. Kanatzidis, N. A. Matchanov, Timothy P. Hogan, Jonathan D'Angelo, Edward J. Timm
Publikováno v:
Applied Solar Energy. 48:5-9
This investigation reports the output parameters of thermoelectric modules on based on metal/LAST(T) hot side contacts.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d5c1c1e759426ec3ba30f68844bef7a2
https://doi.org/10.3103/s0003701x12010094
https://doi.org/10.3103/s0003701x12010094
Autor:
Eldon D. Case, Mercouri G. Kanatzidis, Timothy P. Hogan, Harold Schock, Iliya Todorov, Edward J. Timm, Chun I. Wu
Publikováno v:
Journal of Electronic Materials. 41:1579-1582
Lead chalcogenide materials have drawn attention in recent years because of their outstanding thermoelectric properties. Bulk n-type materials of AgPbmSbTe2+m have been reported to exhibit high figure of merit, ZT, as high as 1.7 at 700 K. Recent rep
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::711d25b56c43e54afbdeca08d099b3d4
https://doi.org/10.1007/s11664-011-1845-0
https://doi.org/10.1007/s11664-011-1845-0
Autor:
Trevor Ruckle, Thierry Caillat, Harold Schock, Ryan Maloney, Long Zhang, Edward J. Timm, Jean-Pierre Fleurial, M Lyle, Jeff Sakamoto
Publikováno v:
Science of Advanced Materials. 3:621-632
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ac1469edc20297903adeaf1ee6f48b04
https://doi.org/10.1166/sam.2011.1192
https://doi.org/10.1166/sam.2011.1192
Autor:
Timothy P. Hogan, Muhammad Farhan, Jonathan D'Angelo, Harold Schock, Mercouri G. Kanatzidis, Edward J. Timm, N. A. Matchanov, Eldon D. Case
Publikováno v:
Applied Solar Energy. 47:90-97
Results on fabrication and characterization of metal hot side electrical contacts to nanostructured AgPbmSbTe2 + m and Ag(PbSn)mSbTe2 + m materials by using SnTe diffusion bonding are presented.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6f42bdcac9be03d56be1a2a58fcb44e6
https://doi.org/10.3103/s0003701x11020137
https://doi.org/10.3103/s0003701x11020137
Autor:
Ryan C. Stewart, Jeffery S. Sakamoto, Eldon D. Case, Jennifer E. Ni, Daniel C. Kleinow, Robert D. Schmidt, Bradley L. Wing, Edward J. Timm
Publikováno v:
Journal of Alloys and Compounds. 504:303-309
Room temperature Young's modulus, shear modulus and Poisson's ratio were measured by Resonant Ultrasound Spectroscopy (RUS) for a total of 29 skutterudite specimens cut from four hot pressed billets: (i) two p-type (Ce 0.9 Fe 3.5 Co 0.5 Sb 12 ) bille
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e39fdc7dbabe1358119de657d59eebfc
https://doi.org/10.1016/j.jallcom.2010.06.003
https://doi.org/10.1016/j.jallcom.2010.06.003
Autor:
Jennifer E. Ni, Ryan C. Stewart, Eldon D. Case, Steven N. Girard, Kristen N. Khabir, Chun I. Wu, Edward J. Timm, Mercouri G. Kanatzidis, Timothy P. Hogan
Publikováno v:
Materials Science and Engineering: B. 170:58-66
Two-phase PbTe–PbS materials, in which PbS is a nanostructured phase, are promising thermoelectric materials for the direct conversion of heat energy into electricity. In this study, a Vickers indentation mean hardness of 1.18 ± 0.09 GPa was measu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6f31dcfdc1e9b4c258e4159388536b35
https://doi.org/10.1016/j.mseb.2010.02.026
https://doi.org/10.1016/j.mseb.2010.02.026
Anomalous temperature-dependent Young’s modulus of a cast LAST (Pb–Sb–Ag–Te) thermoelectric material
Publikováno v:
Acta Materialia. 58:31-38
Thermomechanical characterization is important to material evaluation and device design in the development of thermoelectric technology. In this study, we utilize the resonant ultrasound spectroscopy (RUS) technique to examine the elastic behavior of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f377ec5125905a5a0c703482ba09dc55
https://doi.org/10.1016/j.actamat.2009.08.054
https://doi.org/10.1016/j.actamat.2009.08.054
Publikováno v:
Materials Chemistry and Physics. 118:459-466
Porosity in thermoelectric materials affects the thermal, electrical and mechanical properties of the materials. In this study, the resonant ultrasound spectroscopy technique was used to determine the Young's modulus, E, shear modulus, G, and Poisson
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3c148a6bf2f9597190987bb1bbd3b0dc
https://doi.org/10.1016/j.matchemphys.2009.08.018
https://doi.org/10.1016/j.matchemphys.2009.08.018
Autor:
Edward J. Timm, Fei Ren, Bradley D. Hall, Eldon D. Case, Edgar Lara-Curzio, Rosa M Trejo, Roberta A. Meisner
Publikováno v:
Philosophical Magazine. 89:1439-1455
The thermal expansion for two compositions of cast and hot-pressed LAST (Pb–Sb–Ag–Te) n-type thermoelectric materials has been measured between room temperature and 673 K via thermomechanical analysis (TMA). In addition, using high-temperature
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::948a721e06e3984ccbc7ce2996d770db
https://doi.org/10.1080/14786430903002376
https://doi.org/10.1080/14786430903002376