Zobrazeno 1 - 10
of 66
pro vyhledávání: '"Eberhard A. Meinecke"'
Autor:
Eberhard A. Meinecke, Peter Metlikovič
Publikováno v:
Rubber Chemistry and Technology. 72:484-512
Conveyors consist of rubber coated, fiber reinforced belts which are supported and driven by rollers. The rollers are generally coated to increase and stabilize the friction and to reduce abrasion, noise and dirt buildup. Pressures and shear stresses
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::63010190f6153ae013e38d2f6339cf32
https://doi.org/10.5254/1.3538815
https://doi.org/10.5254/1.3538815
Autor:
Eberhard A. Meinecke, A. I. Kasner
Publikováno v:
Rubber Chemistry and Technology. 69:424-443
An overview of the causes and effects of porosity in rubber has been presented. The formation of porosity in rubber can be attributed to the heterogeneous nucleation and diffusion controlled bubble growth. The process proceeds simultaneously with vul
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::339e127dcfc271b70a51dcb05d3bb5c8
https://doi.org/10.5254/1.3538379
https://doi.org/10.5254/1.3538379
Autor:
A. I. Kasner, Eberhard A. Meinecke
Publikováno v:
Rubber Chemistry and Technology. 68:219-229
Cylindrical samples, with different shape factors and levels of porosity, were prepared from a model EPDM compound and tested in compression. The modulus was reduced considerably with the introduction of porosity, especially when the shape factor was
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::161702adafed1f356925ddefb5e184e1
https://doi.org/10.5254/1.3538737
https://doi.org/10.5254/1.3538737
Autor:
Eberhard A. Meinecke, Hoang T. Pham
Publikováno v:
Journal of Applied Polymer Science. 53:257-264
The advantage of the constant-speed squeeze film flow is that the shear rate is not constant but changes with gap height and position. This allows the rheological characterization of a material to be carried out in a shorter amount of experimentation
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::76cc0f2d62a32bae2e45dc0274346c9f
https://doi.org/10.1002/app.1994.070530301
https://doi.org/10.1002/app.1994.070530301
Autor:
Hoang T. Pham, Eberhard A. Meinecke
Publikováno v:
Journal of Applied Polymer Science. 53:265-273
The applicability of the squeeze film flow geometry in a processibility tester is investigated in this study. A prototype processibility tester has been built by retrofitting it to a servohydraulic load frame. Several processibility parameters such a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8a7f47eb33dd87fb7ae1125156ab93ac
https://doi.org/10.1002/app.1994.070530302
https://doi.org/10.1002/app.1994.070530302
Autor:
Eberhard A. Meinecke
Publikováno v:
Rubber Chemistry and Technology. 64:269-284
It has been shown that it is possible to predict the viscoelastic response of elastomers and elastomeric engineering components under both load- and position-control conditions if one assumes: a) that the modulus of the materials increases with the s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::89614f4933a2a532d3ae5ad1c5ae4524
https://doi.org/10.5254/1.3538558
https://doi.org/10.5254/1.3538558
Autor:
S. Maksin, Eberhard A. Meinecke
Publikováno v:
Rubber Chemistry and Technology. 54:857-870
The influence of carbon black loading on the dynamic properties of statically deformed elastomers has been investigated. The energy loss per cycle was found to increase according to the square of the strain amplification factor as expressed by the Gu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e60339717c3777d1e38fce5ff8e1f170
https://doi.org/10.5254/1.3535839
https://doi.org/10.5254/1.3535839
Autor:
L. S. Porter, Eberhard A. Meinecke
Publikováno v:
Rubber Chemistry and Technology. 53:1133-1144
Rubber has a stress-strain response to compression-shear loadings that is the same as its stress-strain response to simple shear loadings. However, its load-deflection response to the compression-shear loading is not the same as its simple shear resp
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::84df8a5c03d8676f351071d47182b4f5
https://doi.org/10.5254/1.3535084
https://doi.org/10.5254/1.3535084
Autor:
Eberhard A. Meinecke, Shau-Chew Wang
Publikováno v:
Rubber Chemistry and Technology. 58:154-163
The constant load buckling of viscoelastic columns has been studied extensively in the past and equations have been derived to predict the buckling time from the geometry of the columns and the constitutive equation of the material. These theories re
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2d39fee37029d678d5362940902be325
https://doi.org/10.5254/1.3536056
https://doi.org/10.5254/1.3536056
Autor:
Eberhard A. Meinecke, Shau-Chew Wang
Publikováno v:
Rubber Chemistry and Technology. 58:164-175
The buckling of viscoelastic columns has been considered from both a theoretical and an experimental perspective. The fact that buckling occurs at relatively low strain where the SBR is nearly linearly viscoelastic allowed several simplifications in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c9194410aab6e192b349adfefb06e7a3
https://doi.org/10.5254/1.3536057
https://doi.org/10.5254/1.3536057