Zobrazeno 1 - 10
of 423
pro vyhledávání: '"ECG Measurement"'
Publikováno v:
IEEE Access, Vol 9, Pp 24363-24372 (2021)
Holter electrocardiographs, which are commonly used for long-term electrocardiographic measurements, are not necessarily suitable for long-term measurements during sleep because the electrodes are directly attached to the skin, causing discomfort and
Externí odkaz:
https://doaj.org/article/96213aa331314062a7e2451076c1ca20
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
Sensors, Vol 22, Iss 21, p 8388 (2022)
This paper presents a silicon−dioxide−coated capacitive electrode system for an ambulatory electrocardiogram (ECG). The electrode was coated with a nano−leveled (287 nm) silicon dioxide layer which has a very high resistance of over 200 MΩ. Du
Externí odkaz:
https://doaj.org/article/c232b051af554068b51ca7ec84cbb4ae
V1r + DIIq is a novel and accurate criterion to predict right vs. left paraseptal accessory pathways
Autor:
Yusuf Marangozoğlu, Onur Kaypakli, Hasan Koca, Mustafa Lutfullah Ardıc, Durmuş Yıldıray Şahin
Publikováno v:
Journal of Electrocardiology. 70:30-34
PURPOSE The correct estimation of accessory pathway (AP) localization from surface ECG is critical before the procedure. Our study aimed to detect the predictive value of the V1r + DIIq criterion for differentiating right- from left-sided paraseptal
Publikováno v:
IEEE Sensors Journal. 21:18353-18367
Sensing of bioelectrical potentials using a non-contact method remains promising for the long-term recording of heart biopotential signals. Recording electrocardiogram (ECG) in non-contact mode incorporates dielectric materials into capacitive bioele
Publikováno v:
Sensors; Volume 22; Issue 21; Pages: 8388
This paper presents a silicon−dioxide−coated capacitive electrode system for an ambulatory electrocardiogram (ECG). The electrode was coated with a nano−leveled (287 nm) silicon dioxide layer which has a very high resistance of over 200 MΩ. Du
Publikováno v:
Hearts, Vol 2, Iss 31, Pp 384-409 (2021)
Ever since the first publication of the standard communication protocol for computer-assisted electrocardiography (SCP-ECG), prENV 1064, in 1993, by the European Committee for Standardization (CEN), SCP-ECG has become a leading example in health info
Publikováno v:
法政大学大学院紀要. 理工学・工学研究科編. 62:1-6
Holter electrocardiographs, which are commonly used for long-term electrocardiographic measurements, are not necessarily suitable for long-term measurements during sleep because the electrodes are directly attached to the skin, causing discomfort and
Publikováno v:
International Review of Applied Sciences and Engineering. 12:76-85
In this project an ECG measurement and wave identification system was made. The measuring system hardware is based on a Texas Instruments ADS1298ECG amplifier and analog-to-digital converter board. The measurement and processing software was created
Publikováno v:
Microsystem Technologies. 27:3349-3355
With the increasing incidence of cardiovascular events, especially for cardiac arrest and sudden death, the importance of external defibrillator has been greatly recognized. While the current electrodes used in external defibrillator are mainly rigid