Zobrazeno 1 - 10 of 74 pro vyhledávání: '"E. Salernitano"'
1
Akademický článek
Aqueous aluminium titanate paste for the liquid deposition modelling
Autor: F. Bezzi, P. Fabbri, G. Magnani, E. Salernitano, M. Scafè, A. Strafella
Publikováno v: Open Ceramics, Vol 9, Iss , Pp 100224- (2022)
Advanced ceramic pastes, based on precursor of aluminium titanate (tialite, Al2TiO5), were prepared in two steps by ball milling starting from an aqueous slurry and with the addition of a thickener. Rheological behaviour of the prepared slurries and
Externí odkaz: https://doaj.org/article/8fbe53733fe84fcab23b55db476e3887
Zobrazit plný text záznamu
2
Akademický článek
15-15Ti(Si) austenitic steel: creep behaviour in hostile environment
Autor: A. Strafella, A. Coglitore, P. Fabbri, E. Salernitano
Publikováno v: Frattura ed Integrità Strutturale, Vol 11, Iss 42, Pp 352-365 (2017)
This work aims at studying the creep behaviour of 15-15Ti(Si) austenitic steel, under uniaxial stress (range of 300-560 MPa), and its interaction with liquid lead. The steel was tested to verify its sensitivity to Liquid Metal Embrittlement (LME) and
Externí odkaz: https://doaj.org/article/f3ecb04a8b9d49739a5c4b96a9bdb5be
Zobrazit plný text záznamu
4
New Perspectives on Zirconia Composites as Biomaterials
Autor: Giuseppe Magnani, Paride Fabbri, Enrico Leoni, E. Salernitano, Francesca Mazzanti
Publikováno v: Journal of Composites Science; Volume 5; Issue 9; Pages: 244
Journal of Composites Science, Vol 5, Iss 244, p 244 (2021)
Zirconia–alumina composites couple the high toughness of zirconia with the peculiar properties of alumina, i.e., hardness, wear, and chemical resistance, so they are considered promising materials for orthopedic and dental implants. The design of h
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6977862a827168d5a30c49c2cc5144a3
Zobrazit plný text záznamu
5
SiC/MoSi2 based coatings for Cf/C composites by two step pack cementation
Autor: Matteo Scafè, Giuseppe Magnani, Federica Bezzi, Selene Grilli, F. Burgio, E. Salernitano, Paride Fabbri
Publikováno v: Journal of the European Ceramic Society. 39:79-84
In order to improve the oxidation resistance of Cf/Cs produced by chemical vapour infiltration, a multilayer coating based on silicon carbide and molybdenum disilicide was produced by two-step pack cementation technique. The inner SiC layer with a th
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::fc4b7113f6c2b306b6788ff249479797
https://doi.org/10.1016/j.jeurceramsoc.2018.01.024
Zobrazit plný text záznamu
6
15-15Ti(Si) austenitic steel: creep behaviour in hostile environment
Autor: Antonino Coglitore, Alessandra Strafella, E. Salernitano, Paride Fabbri
Publikováno v: Frattura ed Integrità Strutturale, Vol 11, Iss 42, Pp 352-365 (2017)
Frattura ed Integrità Strutturale, Vol 11, Iss 42 (2017)
Frattura ed Integrità Strutturale; Vol. 11 No. 42 (2017): October 2017; Pages 352-365
Frattura ed Integrità Strutturale; V. 11 N. 42 (2017): October 2017; Pages 352-365
This work aims at studying the creep behaviour of 15-15Ti(Si) austenitic steel, under uniaxial stress (range of 300-560 MPa), and its interaction with liquid lead. The steel was tested to verify its sensitivity to Liquid Metal Embrittlement (LME) and
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::63256e330721e9127ab01b02f469aa66
http://www.gruppofrattura.it/pdf/rivista/numero42/numero_42_art_36.pdf
Zobrazit plný text záznamu
7
Creep behaviour of 15-15Ti(Si) austenitic steel in air and in liquid lead at 550°C
Autor: Alessandra Strafella, E. Salernitano, Antonino Coglitore
Publikováno v: Procedia Structural Integrity. 3:484-497
This work aims at studying the creep behaviour of 15-15Ti(Si) austenitic steel, under uniaxial stress and its interaction with liquid lead. Creep tests were performed at 550 °C in an engineering stress range of 300-560 MPa. The 15-15Ti(Si) stainless
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::ae28d5d2fb340b455f1aafb8336891a1
https://doi.org/10.1016/j.prostr.2017.04.061
Zobrazit plný text záznamu
8
Innovative electrodes for direct methanol fuel cells based on carbon nanofibers and bimetallic PtAu nanocatalysts
Autor: M. De Francesco, L. Giorgi, V. Contini, Th. Dikonimos Makris, E. Salernitano, S. Gagliardi
Publikováno v: International Journal of Hydrogen Energy. 39:21601-21612
Direct methanol fuel cells are very promising power sources, but the easy poisoning of the platinum anode electrocatalyst by CO-like reaction intermediates, restricts their industrial application and commercialization. The development of Pt-based all
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::d7514b92af7216236fc86b5495886122
https://doi.org/10.1016/j.ijhydene.2014.06.053
Zobrazit plný text záznamu
10
Direct growth of carbon nanofibers on carbon-based substrates as integrated gas diffusion and catalyst layer for polymer electrolyte fuel cells
Autor: E. Salernitano, Th. Dikonimos Makris, L. Giorgi
Publikováno v: International Journal of Hydrogen Energy. 39:15005-15016
One-dimensional carbon nanostructures are considered promising for application as catalyst support in polymer electrolyte fuel cells, replacing the most widely used carbon black, due to their physico-chemical properties and high surface area. Differe
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b6a580dfe5051751ad1373596c33d1cf
https://doi.org/10.1016/j.ijhydene.2014.07.060
Zobrazit plný text záznamu

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje