Zobrazeno 1 - 10
of 61
pro vyhledávání: '"Dymarski, Paweł"'
Publikováno v:
Polish Maritime Research, Vol 29, Iss 3, Pp 154-159 (2022)
The article presents the results of selected works related to the wider subject of research conducted at the Faculty of Mechanical Engineering and Shipbuilding at the Gdańsk University of Technology, regarding designing various on board devices with
Externí odkaz:
https://doaj.org/article/ddf5b781c8a2412b9dd5a5efc159f48e
Publikováno v:
Polish Maritime Research, Vol 29, Iss 2, Pp 35-42 (2022)
The article presents a design of a floating platform for offshore wind turbines. The concept is a modification of the Spar design and consists of three variable section columns connected to each other by a ballast tank in the lower part of the platfo
Externí odkaz:
https://doaj.org/article/f571a87275f5465e8e8737336fec6514
Publikováno v:
Polish Maritime Research, Vol 29, Iss 1, Pp 26-33 (2022)
The paper presents an innovative solution which is heave plates with holes. The long-known heave plates are designed to damp the heave motion of platforms. They are most often used for Spar platforms. The growing interest in this type of platform as
Externí odkaz:
https://doaj.org/article/75365e77f2b24f3c899d8831dc80a18e
Publikováno v:
Polish Maritime Research, Vol 26, Iss 4, Pp 109-116 (2019)
The article presents the results of selected works related to the wider subject of the research conducted at the Faculty of Ocean Engineering and Ship Technology of the Gdansk University of Technology, which concerns design and technology of construc
Externí odkaz:
https://doaj.org/article/b579eef89d9c40cd84c79e5698ab7201
Autor:
Dymarski Paweł
Publikováno v:
Polish Maritime Research, Vol 26, Iss 2, Pp 183-197 (2019)
The article presents the results of the research conducted within the framework of the project entitled WIND-TU-PLA (ERA-NET, MARTEC II), the general aim of which was to design and analyse supporting structures for wind turbines intended for operatio
Externí odkaz:
https://doaj.org/article/12875beb00414f06a58d240ec85d5d98
Autor:
Kniat Aleksander, Dymarski Paweł
Publikováno v:
Polish Maritime Research, Vol 25, Iss s1, Pp 51-55 (2018)
The article presents the experiment’s results of the lifeboat model lowered with an initial speed and then released to fall onto a flat water surface. The purpose of the research is to determine the trajectory of the vertical boat motion and descri
Externí odkaz:
https://doaj.org/article/3563917c8d9f4ab6b9ee820ebd486d19
Publikováno v:
Polish Maritime Research, Vol 24, Iss s1, Pp 59-66 (2017)
The article is part of the design and research work conducted at the Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, in cooperation with a number of other research centres, which concerns offshore wind farms planned
Externí odkaz:
https://doaj.org/article/74fb14d88d284cb0834ca6463e28df37
Publikováno v:
Polish Maritime Research, Vol 24, Iss s1, Pp 53-58 (2017)
The article describes numerical simulations of the process of lifeboat launching at the ship’s side. The research aimed at finding the values of ship motion parameters which appear to be most dangerous for people in the lowered lifeboat due to the
Externí odkaz:
https://doaj.org/article/a5cf881a5a6e40e8a2f0c8c4b4d5a68d
Publikováno v:
Polish Maritime Research, Vol 24, Iss s1, Pp 230-241 (2017)
The article presents the calculation and design stages of the TLP platform serving as a supporting construction of a 6 MW offshore wind turbine. This platform is designed to anchor at sea at a depth of 60 m. The authors presented the method of parame
Externí odkaz:
https://doaj.org/article/17011cc843a948c18ef402af1bb4cc08
Publikováno v:
Polish Maritime Research, Vol 23, Iss 1, Pp 52-60 (2016)
This paper presents a description of an effective method for determining loads due to waves and current acting on the supporting structures of the offshore wind turbines. This method is dedicated to the structures consisting of the cylindrical or con
Externí odkaz:
https://doaj.org/article/0fe249e237f64501a440feb8f11b4ef4