Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Dong-Hi Lee"'
Publikováno v:
Japanese Journal of Applied Physics. 41:28-31
A series of ZnO films with various thicknesses were prepared on (0001) sapphire substrate by pulsed laser deposition (PLD). Scanning electron microscopy (SEM) and x-ray diffraction (XRD) analysis were utilized to investigate the effects of thickness
Publikováno v:
Journal of Physics and Chemistry of Solids. 58:671-678
The Seebeck coefficient and electrical conductivity of the 25%Bi 2 Te 3 -75%Sb 2 Te 3 solid solution prepared by hot-pressing method were measured and the effects of particle size, oxidation, hot-pressing temperature and time on the Seebeck coefficie
Publikováno v:
SID Symposium Digest of Technical Papers. 43:908-909
An ultra-short throw pico-projector module including a newly developed LED projection optical system is presented. The projection optic system features two right-angled prisms and a convex aspheric mirror. We have achieved 10.7 inch projected image s
Publikováno v:
Fifteenth International Conference on Thermoelectrics. Proceedings ICT '96.
Heat treatment of a single phase of Fe-Si system produced eutectoid microstructures consisted of /spl beta/ and Si phases. The volume fraction of Si dispersoids, 0.1/spl sim/0.25 /spl mu/m in size, was controlled by varying Si content within the comp
Autor:
Ii-Ho Kim, Dong-Hi Lee
Publikováno v:
Fifteenth International Conference on Thermoelectrics. Proceedings ICT '96.
Thin film thermoelectric generator cells (TFTEGCs) of the Bi-Sb-Te-Se system were fabricated and their performances were investigated. The generator cells were composed of several layers of plate-modules, and each plate-module contained 15 p/n couple
Publikováno v:
Seventeenth International Conference on Thermoelectrics. Proceedings ICT98 (Cat. No.98TH8365).
N-type thermoelectrics of Co-doped iron silicide have been fabricated and studied. The Fe:Co ratio was kept constant at 0.95:0.05 to achieve a composition of (Fe/sub 0.95/Co/sub 0.05/)/sub x/Si/sub 2/, where two values of x were chosen: 0.9 and 0.8 t
Autor:
Dong-Hi Lee, Byoung-Gue Min
Publikováno v:
XVI ICT '97. Proceedings ICT'97. 16th International Conference on Thermoelectrics (Cat. No.97TH8291).
While melt-cast FeSi/sub 2/ requires careful heat-treatment of homogenization and phase transformation to achieve thermoelectric /spl beta/-phase, the mechanical alloying(M/A) and sintering method is expected to simplify the process, By using the M/A
Publikováno v:
XVI ICT '97. Proceedings ICT'97. 16th International Conference on Thermoelectrics (Cat. No.97TH8291).
Despite high thermoelectric performance, the commercial applications of Bi/sub 2/Te/sub 3/-Sb/sub 2/Te/sub 3/ based thermoelectrics are limited mainly because of production cost due to complicated processing steps. In this study, a new approach to th
Autor:
Ii-Ho Kim, Dong-Hi Lee
Publikováno v:
AIP Conference Proceedings.
Whatever the methods for preparation of thin film thermoelectrics, a subsequent annealing is inevitable to reduce defects and residual stresses introduced during the fabrication processes and also to control the uniform carrier concentration of the f
Publikováno v:
Journal of the Korean Association of Pediatric Surgeons. 5:69