Visco-hyperelastic material model fitting to experimental stress–strain curves using a genetic algorithm and its application to soft tissue simulants

Autor: Samuel Gómez-Garraza, Raúl de Santos, Diego Infante-García, Miguel Marco

Publikováno v: Scientific Reports, Vol 14, Iss 1, Pp 1-20 (2024)

Abstract Ballistic impacts on human thorax without penetration can produce severe injuries or even death of the carrier. Soft tissue finite element models must capture the non-linear elasticity and strain-rate dependence to accurately estimate the dy

Externí odkaz: https://doaj.org/article/940b9e2e2ec04848bc4a99c115e6ef16

High Speed Finish Turning of Inconel 718 Using PCBN Tools under Dry Conditions

Autor: José Luis Cantero, José Díaz-Álvarez, Diego Infante-García, Marcos Rodríguez, Víctor Criado

Publikováno v: Metals, Vol 8, Iss 3, p 192 (2018)

Inconel 718 is a superalloy, considered one of the least machinable materials. Tools must withstand a high level of temperatures and pressures in a very localized area, the abrasiveness of the hard carbides contained in the Inconel 718 microstructure

Externí odkaz: https://doaj.org/article/9c86d9b323d141a7b814c5728a753bb2

Influence of material extrusion parameters on fracture mechanisms of polylactic acid under three-point bending

Autor: Mario Álvarez-Blanco, Adrián Arias-Blanco, Diego Infante-García, Miguel Marco, Eugenio Giner, M. Henar Miguélez

Publikováno v: Engineering Fracture Mechanics. 283:109223

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::56507f421baa56d32cae649aeddc26a1
https://doi.org/10.1016/j.engfracmech.2023.109223

Critical analysis of the suitability of crack propagation direction criteria for 2D cylindrical plain fretting contact

Autor: Diego Infante-García, Iñigo Llavori, Naiara Rodriguez-Florez, X. Gómez, Alaitz Zabala, Eugenio Giner, A. Aginagalde

Publikováno v: RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
instname
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid

[EN] In this work the suitability of the criterion of maximum effective amplitude of the normal stress (Delta sigma(n,eff))(max) and the criterion of minimum shear stress range (Delta tau)(min) for 2D cylindrical plain fretting contact condition has

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::730b3e210c1cc929718627c9fc65aee8
https://doi.org/10.1016/j.engfracmech.2019.04.035

Influence of the undeformed chip cross section in finishing turning of Inconel 718 with PCBN tools

Autor: Diego Infante-García, María Henar Miguélez, José Díaz-Álvarez, José-Luis Cantero, A. Muñoz-Sánchez

Publikováno v: Procedia CIRP. 77:122-125

Proceedings of: 8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 June 2018, Budapest, Hungary. Inconel 718 is a difficult-to-cut material due to its poor thermal conductivity, severe work hardening and high strength at high temperatu

Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::16df65286b7cdd3e39329a78c3b16f84
https://doi.org/10.1016/j.procir.2018.08.246