Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Deyuan Lou"'
Autor:
Wenqian Zhang, Yongchun Li, Hongtao Dong, Chongwen Yang, Xinli Jiang, Deyuan Lou, Huan Xue, Kewei Fang, Xuelin Wang
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 5076-5094 (2023)
Correlation between machined surface alterations and stress corrosion cracking (SCC) susceptibility of austenitic stainless steels is investigated. The machining-induced residual stress, roughness, micro-hardness and dislocation density were characte
Externí odkaz:
https://doaj.org/article/91c344d9f2494e3090bda9c46bcdc3e3
Publikováno v:
Crystals, Vol 13, Iss 9, p 1397 (2023)
Groove is widely used in the wicks of heat pipes. In this paper, a laser texture deposition (LTD) process was proposed to texture deposit SiO2 in rectangular aluminum groove. Both the SEM and XPS analysis revealed that a fluffy SiO2 layer was deposit
Externí odkaz:
https://doaj.org/article/3aabb37a5ffd4298a67d28aa33406be9
Publikováno v:
Medžiagotyra, Vol 27, Iss 2, Pp 167-174 (2021)
To explore the effect of laser scanning speed on the microstructure and performance of Cr3C2-NiCr cermet layers fabricated by in-situ laser cladding, Cr3C2-NiCr cermet layers were laser cladded from Ni/Cr/Graphite (25:65:10 wt.%) elemental powder mix
Externí odkaz:
https://doaj.org/article/7d544646440f4b2895065b88cc57eeef
Publikováno v:
Crystals, Vol 13, Iss 5, p 840 (2023)
Chemical modification is usually utilized for preparing superhydrophobic SiC surfaces, which has the problems of long processing time, high environmental contamination risk, and high cost. To enhance the condensation heat transfer efficiency of SiC,
Externí odkaz:
https://doaj.org/article/6e400689f6df4db6a15172ff0b9884b4
Autor:
Deyuan Lou, Enkang Liang, Pengjian Chen, Guodong Jiang, Lishi Wang, Laiqing Guan, Yutao Wang, Dun Liu
Publikováno v:
Crystals, Vol 12, Iss 5, p 695 (2022)
During the laser surface texturing process, scanning overlap is usually misused, because it cannot only be dimple overlap, but also can be laser spot overlap. Experiments were conducted to investigate the relationship between laser spot overlap and d
Externí odkaz:
https://doaj.org/article/cae7abd1245449839a3188a2a536b1cf
Publikováno v:
Materials and Corrosion. 74:683-693
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1f92c5707d32a2fde2d24539542b31ab
https://doi.org/10.1002/maco.202213663
https://doi.org/10.1002/maco.202213663
Autor:
Qibiao Yang, Dongguan Wang, Yihao Xiong, Daomeng Zhang, Lie Chen, Jian Cheng, Deyuan Lou, Dun Liu
Publikováno v:
Materials and Corrosion. 74:551-559
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::83f172fa055820163bc16d7774d5c4a6
https://doi.org/10.1002/maco.202213541
https://doi.org/10.1002/maco.202213541
Publikováno v:
Journal of Reinforced Plastics and Composites. 41:893-901
Processing of aramid fiber reinforced plastics (AFRP) with traditional cutting or milling methods usually result in low machining accuracy and poor edge quality. In this paper, ultrafast laser ablation of AFRP was systematically implemented to test i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f4adebb1b2f760f7221f667b8481f647
https://doi.org/10.1177/07316844221080513
https://doi.org/10.1177/07316844221080513
Autor:
Deyuan LOU1, Shaokun YANG1, Sheng MEI1, Qing LIU1, Jian CHENG1, Qibiao YANG1, Dun LIU1 Dun.liu@hbut.edu.cn, Chunlin HE2
Publikováno v:
Materials Science / Medziagotyra. 2021, Vol. 27 Issue 2, p167-174. 8p.
Autor:
Jian Cheng, Sheng Jiang, Feng Xie, Lie Chen, Qibiao Yang, Deyuan Lou, Zhongsheng Zhai, Fengping Li, Dun Liu
Publikováno v:
Applied Surface Science. 623:157017
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fe0013a621b75f7481e9a313b3c694b0
https://doi.org/10.1016/j.apsusc.2023.157017
https://doi.org/10.1016/j.apsusc.2023.157017