Zobrazeno 1 - 10
of 46
pro vyhledávání: '"Devesh Misra"'
Autor:
Ahmed Morsi, Devesh Misra
Publikováno v:
Journal of Indian Association of Pediatric Surgeons, Vol 27, Iss 6, Pp 728-734 (2022)
Background: Following esophageal atresia/tracheoesophageal fistula (EA/TEF) repair, the standard leak rate reported in the literature is 5%–10%, and stricture rate is 40%–72%. There is a global quest for surgical innovations to drive down these c
Externí odkaz:
https://doaj.org/article/5ef7b7cc88f2460ca66ba7f53156bd3d
Publikováno v:
Metals, Vol 12, Iss 4, p 602 (2022)
The microstructure, properties and deformation behavior of Fe-28.7Mn-10.2Al-1.06C high specific strength steel were studied. The results showed that the density of experimental steel is about 6.59 g/cm3 and the microstructure is austenite. With the i
Externí odkaz:
https://doaj.org/article/e15c03e6c95d441094c9fbade124e7a3
Publikováno v:
Journal of Pediatric Surgery Case Reports, Vol 58, Iss , Pp - (2020)
Introduction: Congenital anomalies of the scrotum are rare; furthermore, ectopic scrotum and accessory scrotum are rarer still. We describe our series of four cases with their surgical management and long-term outcomes. We performed single stage rota
Externí odkaz:
https://doaj.org/article/f6859192ffac4cbaa97397f07d9f1edb
Publikováno v:
Metals, Vol 8, Iss 11, p 872 (2018)
An approach is proposed to enhance the mechanical properties and work-hardening (WH) ability of low-alloy steels. Using asymmetric hot rolling (AHR) and subsequent direct quenching (DQ) prior to the quenching and partitioning (Q&P) process, an ultraf
Externí odkaz:
https://doaj.org/article/810775d4fee145db9d2544bc58e1ada8
Publikováno v:
Metals, Vol 8, Iss 7, p 476 (2018)
The microstructure and mechanical properties of cold-rolled Fe-18Mn-3Al-3Si-0.03C transformation induced plasticity/twinning induced plasticity (TRIP/TWIP) steel in the temperature range of 25 to 600 °C were studied. The experimental steel exhibited
Externí odkaz:
https://doaj.org/article/f95ebb2bf1af419f955f02fa1b944d08
Publikováno v:
Metal Science and Heat Treatment. 64:539-546
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6d8fc258f0fce79ee33a977d873051cc
https://doi.org/10.1007/s11041-023-00848-8
https://doi.org/10.1007/s11041-023-00848-8
Autor:
Huixin Zuo, Jinfeng Feng, Ying Sun, Qiannan Li, Zhichao Li, Devesh Misra, Lianfang He, Huiping Li
Publikováno v:
Journal of Materials Engineering and Performance.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::72c35e36683a0814e4bf3a1ae4085842
https://doi.org/10.1007/s11665-023-08240-6
https://doi.org/10.1007/s11665-023-08240-6
Publikováno v:
steel research international. 94
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::78df531d7aa1f68c9e58085efd81c64d
https://doi.org/10.1002/srin.202200645
https://doi.org/10.1002/srin.202200645
Publikováno v:
Metallurgical and Materials Transactions A. 52:4742-4748
In this study, microstructural evolution and strengthening of commercial purity Ti (CP-Ti)/Ti–0.4Ni graded material (GM) fabricated by laser melting deposition (LMD) is elucidated. Compared with the coarse α-grains of CP-Ti, fine α-lath and Ti2Ni
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::449955b652781c979f3391ecc0ea21eb
https://doi.org/10.1007/s11661-021-06439-7
https://doi.org/10.1007/s11661-021-06439-7
Publikováno v:
Metal Science and Heat Treatment. 63:26-33
The possibility of raising the impact toughness of medium-manganese TRIP-steel Fe – 0.2% C – 6% Mn – 3% Al by application of a novel heat treatment involving quenching from the intercritical temperature range and subsequent tempering is investi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::67a87336ddaca8497c526c99d28205ac
https://doi.org/10.1007/s11041-021-00642-4
https://doi.org/10.1007/s11041-021-00642-4