Zobrazeno 1 - 10
of 132
pro vyhledávání: '"Detlef Löhe"'
Publikováno v:
International Journal of Materials Research. 109:477-478
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ffc29dbddf84f8d7afe026c52e15261b
https://doi.org/10.3139/146.610040
https://doi.org/10.3139/146.610040
Publikováno v:
Transactions of the Indian Institute of Metals. 63:195-202
The influence of superimposed total strain controlled HCF loadings on TMF life is presented and discussed for several cast Al-Si alloys, the Ni-base superalloy Inconel 617 and the cast iron GJS-700. Except for GJS-700, a threshold of the superimposed
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4ffc312f636784c70d44a7adf274d629
https://doi.org/10.1007/s12666-010-0027-8
https://doi.org/10.1007/s12666-010-0027-8
Publikováno v:
Mechanics of Materials. 42:11-23
The statistics of Young’s modulus of microspecimens subjected to a tensile load is examined experimentally, numerically and analytically. The material considered is Stabilor ® G, a dental alloy, mainly consisting of gold. Tensile tests with micros
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::845752819ff0e1c3861f8fc0e418170d
https://doi.org/10.1016/j.mechmat.2009.08.007
https://doi.org/10.1016/j.mechmat.2009.08.007
Publikováno v:
Materials Science and Engineering: A. 501:6-15
Thermal fatigue (TF) tests were performed on the aluminium alloy EN AW-6061-T6, non-reinforced and reinforced with 15 and 22 vol.% Al2O3 particles, respectively. The MMCs were produced by stir casting followed by hot extrusion. Thermal fatigue tests
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8bb49126c41bf5e38e4e25f0a4f7a76b
https://doi.org/10.1016/j.msea.2008.10.009
https://doi.org/10.1016/j.msea.2008.10.009
Autor:
Detlef Löhe, M. Auhorn, Alexander Wanner, B. Okolo, Jürgen Hausselt, B. Kasanická, Tilmann Beck, Volker Schulze, G. Baumeister
Publikováno v:
Materials Science and Engineering: A. 501:70-80
The present study reports on the microstructural state and mechanical properties of cast micro-components made from the commercial Au-alloy; Stabilor ® G. Microscopy methods such as optical light-, scanning- and transmission-electron microscopy were
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e8377376dc145c6f5f480040d8179a00
https://doi.org/10.1016/j.msea.2008.09.070
https://doi.org/10.1016/j.msea.2008.09.070
Autor:
H. Autenrieth, Detlef Löhe, Jürgen Fleischer, Peter Gumbsch, J. Kotschenreuther, Volker Schulze, Marc Weber
Publikováno v:
Machining Science and Technology. 12:474-497
For the production of small quantities of micro devices, machining is a low cost alternative to lithographic processing techniques. However, machining shows process specific size-effects upon miniaturization to the micrometer regime. Hence, the ortho
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3706330d74fe1f54c0273f82b5283e3d
https://doi.org/10.1080/10910340802518728
https://doi.org/10.1080/10910340802518728
Publikováno v:
International Journal of Materials Research. 99:1090-1097
Tools for hot wire rolling are exposed to high thermal, mechanical and tribological loadings during service. Ceramic materials such as silicon nitride possess good mechanical and tribological properties up to temperatures where most of today' roller
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ae5e24959b1fa94fd03dde38c56af67e
https://doi.org/10.3139/146.101742
https://doi.org/10.3139/146.101742
Publikováno v:
International Journal of Fatigue. 30:1838-1842
Dynamic strain ageing processes may increase the fatigue limit of steels. To activate these processes, thermomechanical treatments with cyclic loadings at the temperature of the highest effectiveness of dynamic strain ageing can be applied. The treat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1e80430b773a46f426242e0eaaa78c03
https://doi.org/10.1016/j.ijfatigue.2008.02.003
https://doi.org/10.1016/j.ijfatigue.2008.02.003
Autor:
Detlef Löhe, Robert Ruprecht, Jürgen Haußelt, B. Okolo, Volker Schulze, J. Rögner, G. Baumeister, Eberhard Kerscher
Publikováno v:
Microsystem Technologies. 14:1813-1821
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f812b794d8d89412c45dd6dc8dc15577
https://doi.org/10.1007/s00542-008-0671-7
https://doi.org/10.1007/s00542-008-0671-7
Publikováno v:
Advanced Engineering Materials. 10:529-533
Tensile test micro specimens (gauge section 780 x 260 x 130 μm 3 ) made of aluminum bronze were produced by vacuum pressure casting. Two semicircular notches of radii ranging between 5 and 45 μm were located in the middle of the gauge length. These
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c2b3144cba183df85add817fb9fb4929
https://doi.org/10.1002/adem.200800032
https://doi.org/10.1002/adem.200800032