Zobrazeno 1 - 10
of 57
pro vyhledávání: '"Detian Wan"'
Autor:
Lei Cao, Qiqiang Zhang, Lijing Du, Shuai Fu, Detian Wan, Yiwang Bao, Qingguo Feng, Chunfeng Hu
Publikováno v:
Journal of Advanced Ceramics, Vol 13, Iss 2, Pp 237-246 (2024)
The high-entropy design of MAX phases is expected to confer superior properties, but its study was hindered by the complex synthesis method and limited purity of samples. In this work, two noteworthy types of high-entropy MAX phase structural ceramic
Externí odkaz:
https://doaj.org/article/751995da4d6049ac9bea109015440ec3
Publikováno v:
Journal of Advanced Ceramics, Vol 12, Iss 11, Pp 2032-2040 (2023)
Textured Nb4AlC3 ceramics were rapidly and efficiently prepared by hot forging through spark plasma sintering (SPS). The longitudinal compression ratio of textured Nb4AlC3 ceramics was −78.3%, and the lateral expansion ratio was 32.1%. The grains g
Externí odkaz:
https://doaj.org/article/953640863a4b4effbe235be609b851bc
Publikováno v:
Railway Sciences, Vol 2, Iss 2, Pp 211-224 (2023)
Purpose – This paper aims to analyze the bearing characteristics of the high speed train window glass under aerodynamic load effects. Design/methodology/approach – In order to obtain the dynamic strain response of passenger compartment window gla
Externí odkaz:
https://doaj.org/article/52e4a5897b4d4b21828f3c480a41e68a
Publikováno v:
Carbon Neutralization, Vol 1, Iss 2, Pp 189-197 (2022)
Abstract Nitrogen‐doped carbon nanotubes (NCNTs) are usually selective and robust electrocatalysts for CO2 reduction to CO in aqueous media. However, the electronic property of NCNTs is strongly dependent on their curvature, the change of curvature
Externí odkaz:
https://doaj.org/article/eb88b3ff7bdb4ba89fa67e92e038c716
Publikováno v:
Materials, Vol 16, Iss 17, p 6071 (2023)
In this study, the prestressed coating reinforcement method was employed to create kyanite-coated zirconia toughened alumina (ZTA) prestressed ceramics. Due to the mismatch of the coefficient of thermal expansion (CTE) between the coating and substra
Externí odkaz:
https://doaj.org/article/ef48a3de532949ae94f0f52ac8dc848d
Autor:
Yiwang Bao, Fenghua Kuang, Yi Sun, Yueming Li, Detian Wan, Zongyang Shen, Delong Ma, Lingfeng He
Publikováno v:
Journal of Materiomics, Vol 5, Iss 4, Pp 657-662 (2019)
A pre-stressing design and a simple fabrication technology to substantially improve the strength of ceramic components are presented. Residual surface compressive stress is generated in ceramic components by pressureless sintering of a green bulk coa
Externí odkaz:
https://doaj.org/article/c51503f4d42349aa8922a6b634149b06
Autor:
Wei Ding, Baotong Hu, Shuai Fu, Detian Wan, Yiwang Bao, Qingguo Feng, Salvatore Grasso, Chunfeng Hu
Publikováno v:
Materials, Vol 15, Iss 19, p 6877 (2022)
In this work, the rapid thermal shock behavior of Ti2AlC ceramics was studied using induction heating. The present evaluation method possesses the merits of very rapid heating within tens of seconds and fast quenching in water of less than 0.1 s, rem
Externí odkaz:
https://doaj.org/article/0123eb5e63c344c6b98c4b0024259050
Publikováno v:
Journal of Advanced Ceramics, Vol 6, Iss 4, Pp 288-303 (2017)
Abstract The accurate evaluation of the elastic modulus of ceramic coatings at high temperature (HT) is of high significance for industrial application, yet it is not easy to get the practical modulus at HT due to the difficulty of the deformation me
Externí odkaz:
https://doaj.org/article/4fe62b743b8340c2968af806efc0ae7e
Autor:
Yu Quan, Baotong Hu, Shuai Fu, Detian Wan, Yiwang Bao, Qingguo Feng, Salvatore Grasso, Chunfeng Hu
Publikováno v:
Metals, Vol 11, Iss 11, p 1829 (2021)
In this paper, in situ V2C-reinforced Cu composites were successfully fabricated by hot pressing at 750 °C under 25 MPa using Cu and V2SnC powders. Due to decomposition of V2SnC to V2C and Sn during sintering, Sn atoms entered the crystal structure
Externí odkaz:
https://doaj.org/article/812412fb719d4dce9a82bcd1b1dea675
Autor:
Lijing Du, Qiqiang Zhang, Lei Cao, Shuai Fu, Detian Wan, Yiwang Bao, Qingguo Feng, Salvatore Grasso, Chunfeng Hu
Publikováno v:
Journal of the European Ceramic Society. 43:1880-1886
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::219b09a896327acc9a442bea2024bf64
https://doi.org/10.1016/j.jeurceramsoc.2022.12.013
https://doi.org/10.1016/j.jeurceramsoc.2022.12.013