Zobrazeno 1 - 10
of 116
pro vyhledávání: '"Derya Dispinar"'
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 8, Pp 348-351 (2016)
Ötektik üstü Si içeren Al-Si alaşımları tipik olarak aşınmaya karşı direnç arzu edilen parçalarda uygulama alanı bulmaktadır. Aşınma direncini arttıran en temel parametre, Si morfolojisidir. Ötektik üstü alaşımlarda, Si yapıs
Externí odkaz:
https://doaj.org/article/6123601d478a4532a87443f597292482
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 21, Iss 8, Pp 348-351 (2015)
Hypereutectic Al-Si alloys are typically used in applications where wear resistance is required. The primary factor that determines the wear properties is the morphology of Si in these types of alloys. Pouring temperature is one of the ways to contro
Externí odkaz:
https://doaj.org/article/65abcc5c4a7a4fcdaae4e11d09ac78de
Publikováno v:
Archives of Foundry Engineering, Vol vol. 23, Iss No 4, Pp 49-53 (2023)
Turbulent filling of a mould is one of the ways to introduce extrinsic defects into the cast part that could deteriorate many properties of any casting. The turbulence can be easily eliminated by counter gravity casting. In gravity casting, tapered d
Externí odkaz:
https://doaj.org/article/475c21ccbdce45f0bf8fb11836398910
Publikováno v:
Uludağ University Journal of The Faculty of Engineering, Vol 25, Iss 1, Pp 169-186 (2020)
In this study, the effects of different mold types and quenching mediums with different internal stresses on the mechanical properties of ETIAL 221 alloy supplied as a primer were investigated, and analyzed statistically. Firstly, the alloy was poure
Externí odkaz:
https://doaj.org/article/f6977fa1ebed4bfe94a7f2c04659589f
Publikováno v:
Materials Research Express, Vol 7, Iss 2, p 026549 (2020)
Strontium modification of Al–Si alloys has known to have several beneficial effects such as increased feedability, the formation of fibrous Si and increased mechanical properties. However, in the presence of Sr, during melting and holding durations
Externí odkaz:
https://doaj.org/article/a6f4edef5c734a7cb02dfa5ace5afd66
Publikováno v:
Metals, Vol 9, Iss 9, p 957 (2019)
Aluminium and its alloys have been widely used in the automotive industry for some time and A356 is one of the most popular aluminium alloys today in the sector. It contains approximately 7 wt.% Si and 0.3 wt.% Mg. Due to the defects that may be pres
Externí odkaz:
https://doaj.org/article/8ed3a9fd6acd4c8faf711b5fb1ee0a3e
Publikováno v:
Metals, Vol 7, Iss 5, p 157 (2017)
The effects of degassing, holding time and melt additions (Sr, Sr + Ti, Ti, B and B + Sr) on the quality of A356 melts were examined. A total of 120 reduced pressure test samples were collected. Pores in these samples were analyzed via digital image
Externí odkaz:
https://doaj.org/article/6ba1e33edbeb4dd5bdc6e8373deca8ec
Autor:
Tugce Semerci, Kerem Can Dizdar, Apoorv Kulkarni, Derya Dispinar, Gian Domenico Soraru, Cekdar Vakifahmetoglu
Publikováno v:
Journal of Materials Science. 57:14723-14734
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4fad342345006158b2ebb8f310a8c968
https://doi.org/10.1007/s10853-022-07542-9
https://doi.org/10.1007/s10853-022-07542-9
Publikováno v:
Düzce Üniversitesi Bilim ve Teknoloji Dergisi. 10:1186-1200
Alüminyum alaşımlarının döküm yoluyla üretilmesindeki önemli kusurlardan birisi sıcak yırtılmadır. Bu çalışmada, farklı özelliklere sahip 1050 ve 5083 döküm alaşımlarının sıcak yırtılmaları araştırılmış ve sıcak yır
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::67842a1894d53357aa8fb69cbc1a6995
https://doi.org/10.29130/dubited.1013025
https://doi.org/10.29130/dubited.1013025
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 121:7311-7323
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ba6982e6229ddff4aed9cfe42bd7a16f
https://doi.org/10.1007/s00170-022-09808-7
https://doi.org/10.1007/s00170-022-09808-7