Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Delilah A. Brown"'
Publikováno v:
Atlanta Tribune; Dec2018/Jan2019, Vol. 32 Issue 8, p23-23, 1p
Autor:
Delilah A. Brown, Sebastian Zarwell, Tobias Bernhard, Alex R. MacDonald, Eamon A. McCarron, Ralf Brüning
Publikováno v:
Journal of Applied Electrochemistry. 51:795-802
A cyanide-stabilized electroless copper plating process with nickel as a stress-regulating additive was investigated. Small amounts of nickel or cyanide increase the deposition rate, while large amounts of cyanide decrease the deposition rate. The st
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e8bd727ec90a04e1247c484650fcfc71
https://doi.org/10.1007/s10800-021-01535-3
https://doi.org/10.1007/s10800-021-01535-3
Autor:
Tobias Bernhard, Tanu Sharma, Alexandre Leger, Alexandre E. Landry, Ralf Brüning, Delilah A. Brown, Frank Brüning, Sebastian Zarwell
Publikováno v:
Thin Solid Films. 666:76-84
Hydrogen co-deposition in electroless copper is a cause of embrittlement, voids and blisters. Hydrogen release in the plating bath and its incorporation into the copper films were measured. The amount of hydrogen in the films was determined by monito
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::93f2ac89520238f1cfff40a8458d5536
https://doi.org/10.1016/j.tsf.2018.09.029
https://doi.org/10.1016/j.tsf.2018.09.029
Publikováno v:
Journal of physics. Condensed matter : an Institute of Physics journal. 32(15)
A combined experimental and simulation study is carried out to compare the properties of amorphous Ni100-x P x alloys obtained by electroless deposition and rapid melt-quenching. The onset of crystallization of experimental electroless deposited amor
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::56cf25443d2d513f2cd00901cb459bc9
https://pubmed.ncbi.nlm.nih.gov/31816605
https://pubmed.ncbi.nlm.nih.gov/31816605
Publikováno v:
Journal of Crystal Growth. 478:220-228
Copper films for printed circuit board applications have to be fine-grained to achieve even filling of vias. Electroplated Cu films on roll annealed Cu substrates may have unacceptably large epitaxial crystals. Here galvanic films were plated on orie
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2315b9ff3cff7329a6927a2a124a1e54
https://doi.org/10.1016/j.jcrysgro.2017.09.009
https://doi.org/10.1016/j.jcrysgro.2017.09.009
Publikováno v:
Electrochimica Acta. 196:479-486
The time evolution of galvanically plated copper films designed for semi additive processing (SAP) was investigated. Blanket copper films were plated at three current densities. Stress was monitored with the substrate curvature method during and afte
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c2c83c82c00fab1933475398a57b4c40
https://doi.org/10.1016/j.electacta.2016.02.167
https://doi.org/10.1016/j.electacta.2016.02.167
Autor:
Tobias Bernhard, Kilian Klaeden, Jörg Schulze, Sebastian Zarwell, Ralf Brüning, Maryam Abbasi, Delilah A. Brown
Publikováno v:
Thin Solid Films. 714:138366
The production of highly flexible printed circuit boards requires copper plating on roll annealed (RA) Cu foils with strong (001) crystallographic orientation, with electroless copper plating followed by galvanic copper plating. Concurrent epitaxial
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::26156dd9c75c979d2a795d475defdf26
https://doi.org/10.1016/j.tsf.2020.138366
https://doi.org/10.1016/j.tsf.2020.138366
Autor:
Ralf Brüning, Habiba Djaoued, Dongmei Dong, Yahia Djaoued, Jacques Robichaud, Delilah A. Brown, Guillaume Vienneau
Publikováno v:
Electrochimica Acta. 335:135648
In this work anodic NiO electrochromism is investigated under two potential cycling modes: i) the response between coloration and bleaching in increasing potential steps (switching); ii) the stepwise modulation to coloration with increasing potential
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d3aa6b0701a4e82891566c2ef743f1be
https://doi.org/10.1016/j.electacta.2020.135648
https://doi.org/10.1016/j.electacta.2020.135648
Autor:
Jacques Robichaud, Yahia Djaoued, Ralf Bruening, Marie-Hélène Thibault, Luc J. Martin, Guillaume Vienneau, Chloé Comeau, Delilah A. Brown
Publikováno v:
Materials scienceengineering. C, Materials for biological applications. 110
Composite materials aimed at bone tissue engineering need to have suitable bioactivity in order to promote cell proliferation and adhesion. In this article, we study the potential of boronic acids to improve the bioactivity of chitosan-based composit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::104066661003036ec1b7919cbadd923d
https://pubmed.ncbi.nlm.nih.gov/32204103
https://pubmed.ncbi.nlm.nih.gov/32204103