Zobrazeno 1 - 10
of 41 142
pro vyhledávání: '"Deflection (engineering)"'
Publikováno v:
Journal of King Saud University - Engineering Sciences. 35:174-184
Results of fourteen two-span continuous deep beams those made from ordinary reinforced concrete (ORC) as a reference and rubberized reinforced concrete (RRC) are presented and discussed in this research. The main parameters are the rubber ratios as a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ba1753728a736ac240f4fe0eb5660ae1
https://doi.org/10.1016/j.jksues.2021.03.001
https://doi.org/10.1016/j.jksues.2021.03.001
Autor:
Neill Korobov
Publikováno v:
Qualitative Psychology. 10:140-153
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a58e94348b0ef297dd1492baefdfb511
https://doi.org/10.1037/qup0000161
https://doi.org/10.1037/qup0000161
Autor:
Mili J. Hota, V.D. Dhiman
Publikováno v:
Materials Today: Proceedings. 81:712-717
A major cause for the production of higher harmonic forces on the rotating system is the Misalignment between the shafts. This in-turn produces vibrations during the function of any turbine unit that can bring about untimely wear of bearings, looseni
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::04dff4047f4cb2ef5e8083c2d570a7e8
https://doi.org/10.1016/j.matpr.2021.04.179
https://doi.org/10.1016/j.matpr.2021.04.179
Publikováno v:
Journal of King Saud University - Engineering Sciences. 34:398-405
Shear and flexural failure are commonly known as the highest catastrophic failure mode as it never gives any earlier notice before the collapse. The most common shape in the structure of beams and girders is T-section. Therefore it will be more neces
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b44ff83b541d7ca6f56a698618d371f1
https://doi.org/10.1016/j.jksues.2021.01.001
https://doi.org/10.1016/j.jksues.2021.01.001
Publikováno v:
Chinese Journal of Aeronautics. 35:221-235
Aimed at the problem of instability in engine control caused by vector deflection in experiment of turbofan engines with Axisymmetric Vectoring Exhaust Nozzle (AVEN), a vector deflection stability control method of aero-engine based on Linear Active
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::da5712a4f966f2bddfe052ecc97005ff
https://doi.org/10.1016/j.cja.2021.11.011
https://doi.org/10.1016/j.cja.2021.11.011
Autor:
Qingyang Chen, Shiqing Li, Mu Zheng, Jiefu Liu, Zhenbing Luo, Xiong Deng, Hang Yang, Zhijie Zhao
Publikováno v:
Chinese Journal of Aeronautics. 35:1-6
The autonomous and controllable Dual Synthetic Jet Actuator (DSJA) is firstly integrated into the Unmanned Aerial Vehicle (UAV), and flight tests without the deflection of rudders are carried out to verify the viability of DSJA to control the attitud
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::db27a91ad3775c546fdf45d4a0e43e67
https://doi.org/10.1016/j.cja.2021.08.015
https://doi.org/10.1016/j.cja.2021.08.015
Publikováno v:
Defence Technology. 18:1257-1268
Nowadays, the mitigation of damage to a ship caused by the underwater explosion attracts more and more attention from the modern ship designers. In this study, two kinds of scale tests were conducted to investigate the effects of polyurea coatings on
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e7aae9f73c38564125c7ca435ac7138b
https://doi.org/10.1016/j.dt.2021.05.011
https://doi.org/10.1016/j.dt.2021.05.011
Publikováno v:
Fundamental Research. 2:447-455
The application of industrial robots in manufacturing industries has received considerable concerns due to the high flexibility, multifunctionality, and cost-efficiency. It is well known that the robot positioning accuracy is susceptible to the load
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::43e6bbcb6d68ac7e06e66a93230b644c
https://doi.org/10.1016/j.fmre.2021.09.013
https://doi.org/10.1016/j.fmre.2021.09.013
Autor:
Yanbin Gao, Zhouxiang Ding
Publikováno v:
Underground Space. 7:254-267
There is growing engineering concern about the base heave and post uplift phenomena in deep excavation in soft clay, which may pose a risk of instability of retaining systems. The purpose here is to conduct a detailed case study on the post uplift ob
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2f61173691c4d7615f292a5d3ef7c205
https://doi.org/10.1016/j.undsp.2021.07.008
https://doi.org/10.1016/j.undsp.2021.07.008
Publikováno v:
IEEE Transactions on Industrial Electronics. 69:3948-3958
A piezoelectric stick slip actuator with the inertial block structure is presented in an attempt to achieve smooth motion. Under asymmetric excitation, the inertial block produces different inertia, which can dynamically change the normal pressure be
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a685a8baac7173e6f3eb94ac9267776e
https://doi.org/10.1109/tie.2021.3073314
https://doi.org/10.1109/tie.2021.3073314