Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Deborah S. Schnur"'
Publikováno v:
IEEE Transactions on Magnetics. 40:3162-3164
Electrostatic force has been proposed for use in fly height reduction and control. The dominant failure mode is electrical discharge at the head-disk interface (HDI) due to field emission. Ballast resistor films have been used for limiting field emis
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4c48e8981e31623ee29770aea78d0208
https://doi.org/10.1109/tmag.2004.828981
https://doi.org/10.1109/tmag.2004.828981
Autor:
Nicholas Zabaras, Deborah S. Schnur
Publikováno v:
International Journal for Numerical Methods in Engineering. 33:2039-2057
The problem consists of determining the location and size of a circular inclusion in a finite matrix and the elastic material properties of the inclusion and the matrix.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f1cd569c824d55696478060c21087b5b
https://doi.org/10.1002/nme.1620331004
https://doi.org/10.1002/nme.1620331004
Autor:
Nicholas Zabaras, Deborah S. Schnur
Publikováno v:
International Journal for Numerical Methods in Engineering. 30:57-75
A finite element method (FEM) is presented for calculating the surface tractions on a body from internal measurements of displacement at discrete sensor locations. The solution algorithm employs a sensitivity analysis which minimizes the difference b
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9635497ffcd8c89d49f126ef13d6391a
https://doi.org/10.1002/nme.1620300105
https://doi.org/10.1002/nme.1620300105
Autor:
Dion Song, Deborah S. Schnur
Publikováno v:
INTERMAG 2006 - IEEE International Magnetics Conference.
We showed a new method of measuring air bearing take-off performance. The procedure involves spindle speed ramp up as during CSS. The data revealed the intrinsic behaviors for different air bearing designs and are in good agreement with both air bear
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a7a47bb281d1fe43c2463ed17061a5f2
https://doi.org/10.1109/intmag.2006.376370
https://doi.org/10.1109/intmag.2006.376370
Publikováno v:
Magnetic Storage Symposium: Frontiers of Magnetic Hard Disk Drive Tribology and Technology.
As areal density increases and fly height decreases in hard disc drives, it becomes more difficult to achieve a reliable flying interface between the recording head and the disc. Manufacturing variations, environmental conditions and other factors ca
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::00f83e8e7a71d6f384482b8a8926478d
https://doi.org/10.1115/2003-trib-345
https://doi.org/10.1115/2003-trib-345
Publikováno v:
Journal of Applied Physics. 99:08N107
Heater-induced head-disc contacts can cause highly localized wear of the pole tip. We found that scanning electron microscopy and low beam-current focused ion beam imaging are suited at providing a map of the entire pole tip surface and quickly ident
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b79144e4e26da13f60ffe04b4958fdb3
https://doi.org/10.1063/1.2176308
https://doi.org/10.1063/1.2176308
Autor:
Deborah S. Schnur, D. Lee
Publikováno v:
Journal of Biomedical Materials Research. 17:973-991
A variety of acrylic bone cement-metal composite materials were prepared and tested in simple compression at 37 degrees C in order to evaluate the mechanical behavior of these materials for possible use in bone replacement. The stiffness of the compo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ca5fa6d20b1695d0530be5bef45072e4
https://doi.org/10.1002/jbm.820170608
https://doi.org/10.1002/jbm.820170608
Autor:
Deborah S. Schnur, D. Lee
Publikováno v:
Metallurgical Transactions A. 15:1777-1779
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0e80ecc77060c98f4108a819aac97cef
https://doi.org/10.1007/bf02666361
https://doi.org/10.1007/bf02666361
Autor:
Deborah S. Schnur, J.L. Lewis
Publikováno v:
Journal of Biomechanics. 18:240
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e7e8247a145b3f01623b847638113012
https://doi.org/10.1016/0021-9290(85)90262-3
https://doi.org/10.1016/0021-9290(85)90262-3
Conference
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.