Zobrazeno 1 - 8
of 8
pro vyhledávání: '"David Görzen"'
Publikováno v:
Metals, Vol 13, Iss 6, p 1024 (2023)
The mechanical properties of Cu alloyed steels are influenced significantly by the Cu content and the respective state of Cu precipitations as well as the C content. In this context, the effect of an increased C content on the fatigue crack initiatio
Externí odkaz:
https://doaj.org/article/84dc71de710f4f11b5a11b192fa07f82
Publikováno v:
Metals, Vol 12, Iss 7, p 1066 (2022)
For a reliable design of structural components, valid information about the fatigue strength of the material used is a prerequisite. As the determination of the fatigue properties, and especially the fatigue limit σw, requires a high experimental ef
Externí odkaz:
https://doaj.org/article/ae3f21c75eb4494295b6c307efa61f26
Autor:
David Görzen, Florian Patrick Schäfke, Bastian Blinn, Christian Klose, Hans Jürgen Maier, Tilmann Beck
Publikováno v:
Metals, Vol 11, Iss 5, p 744 (2021)
Given the complex process condition, extruded aluminum (Al) alloy tubes show locally pronounced differences in microstructure and mechanical properties, which can be influenced by subsequent heat treatment. In the present study, cyclic indentation te
Externí odkaz:
https://doaj.org/article/4f99cbe898eb4f4d922818d72a12e7b6
Publikováno v:
Applied Sciences, Vol 10, Iss 18, p 6461 (2020)
The 22 wt.% Cr, fully ferritic stainless steel Crofer®22 H has higher thermomechanical fatigue (TMF)- lifetime compared to advanced ferritic-martensitic P91, which is assumed to be caused by different damage tolerance, leading to differences in crac
Externí odkaz:
https://doaj.org/article/195dd934114e4dccb1b0a2c02d0e7117
Publikováno v:
International Journal of Fatigue. 119:78-88
Short-time procedures for determining the fatigue properties of materials can provide significant improvements in cost efficiency and are therefore of great scientific and industrial interest (Jost et al., 2017). A promising short-time procedure is P
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::252844baa944f7f15ff6d03d7832af1e
https://doi.org/10.1016/j.ijfatigue.2018.09.025
https://doi.org/10.1016/j.ijfatigue.2018.09.025
Autor:
Hans Jürgen Maier, David Görzen, Christian Klose, Tilmann Beck, Bastian Blinn, Florian Patrick Schäfke
Publikováno v:
Metals
Volume 11
Issue 5
Metals, Vol 11, Iss 744, p 744 (2021)
Volume 11
Issue 5
Metals, Vol 11, Iss 744, p 744 (2021)
Given the complex process condition, extruded aluminum (Al) alloy tubes show locally pronounced differences in microstructure and mechanical properties, which can be influenced by subsequent heat treatment. In the present study, cyclic indentation te
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::97126af2bd997a67b34e87623477099c
Publikováno v:
International Journal of Fatigue. 136:105587
Cu precipitates in steels can lead to significant changes of mechanical behavior. However, most investigations focus on the influence of these precipitates on hardness, whereas the effects on quasi-static deformation behavior and cyclic properties re
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8fca0b09b7efd9b35d2ae443b08b26e3
https://doi.org/10.1016/j.ijfatigue.2020.105587
https://doi.org/10.1016/j.ijfatigue.2020.105587
Publikováno v:
Materials Science and Engineering: A. 772:138807
From literature, it is well known that Cu precipitates in steels lead to an increase of hardness and quasi-static strength. However, the relation between Cu precipitates and cyclic mechanical properties has been investigated rather limited. Consequen
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a41b0fd21515e6daeaa3120cb887b302
https://doi.org/10.1016/j.msea.2019.138807
https://doi.org/10.1016/j.msea.2019.138807