Zobrazeno 1 - 10
of 28
pro vyhledávání: '"Darko Landek"'
Publikováno v:
Energies, Vol 16, Iss 24, p 7926 (2023)
The computational model that is able to estimate the temperature distribution inside a solid specimen during the film boiling phase of immersion quenching (water entry) process has been presented in this paper. It is based on the prescribed initial t
Externí odkaz:
https://doaj.org/article/74c48c64d27b49cbb87c300fc448ec56
Special Issue: Tribological Coatings—Properties, Mechanisms, and Applications in Surface Engineering
Autor:
Suzana Jakovljević, Darko Landek
Publikováno v:
Coatings. 13:451
Tribological coatings are found on machine elements (e [...]
The contribution compares the abrasion and erosion resistance of twohigh-alloy tool steels, X153CrMoV12-1 and Böhler K390 Micro Clean, coated with multilayer coatings TiN/TiCN and TiN/Ti-B-N. Multilayer coatings were applied to hardened and tempered
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f6137ab50ed125770748a29c2d44f61b
https://www.bib.irb.hr/1223701
https://www.bib.irb.hr/1223701
The purpose of this investigation was to compare the wear of diamond-coated dental burs applied on specimens made of four different materials used in dental prosthetics. Cutting was performed using a dental air turbine handpiece. Identical coarse- gr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a1c02db0f1cac7cd167134bed43ae503
https://www.bib.irb.hr/1077452
https://www.bib.irb.hr/1077452
Publikováno v:
Materials and Corrosion. 70:307-318
Two different steel substrates were coated with the same gradient multilayer TiN/TiCN coating in the plasma‐assisted chemical vapor deposition (PACVD) process. The multilayer TiN/TiCN coatings on the substrate of the X37CrMoV5‐1 tool steel and th
Publikováno v:
Sustainability, Vol 13, Iss 6739, p 6739 (2021)
Sustainability
Volume 13
Issue 12
Sustainability
Volume 13
Issue 12
In this work, alumina (Al2O3) ceramics were prepared using an environmentally friendly slip casting method. To this end, highly concentrated (70 wt.%) aqueous suspensions of alumina (Al2O3) were prepared with different amounts of the ammonium salt of
Publikováno v:
Key Engineering Materials. 674:257-262
T This paper examines the abrasive and erosive wear of duplex multilayer TiN/TiCN and TiN/TiBN coatings deposited on quenched and tempered hot work tool steel grade X37CrMoV5-1. The coatings were produced by duplex method composed of a plasma nitridi
This paper investigates an application of ultrasonic stirring in water and oil-immersion quenching of a medium carbon steel sample. By developing a pressure acoustic simulation, the distribution of ultrasound pressure and acceleration in quenching me
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f6f20246360f5cc0369f693683fae955
https://www.bib.irb.hr/901879
https://www.bib.irb.hr/901879
Autor:
Darko Landek, Mirko Jakopčić
Publikováno v:
Transactions of FAMENA
Volume 41
Issue 1
Volume 41
Issue 1
A barrel is one of the most tribologically and thermally loaded parts of artillery weapons. The influence of the salt bath nitrocarburizing and hard-chrome plating of three steels used for artillery barrels on their abrasion resistance is studied in
Publikováno v:
HTM Journal of Heat Treatment and Materials. 67:118-124
In this paper, the effect of the heating rate on the process of tempering and the obtained hardness of the DIN 100 V1 (AISI W2) carbon tool steel has been investigated and determined. Steel specimens in two initial states were investigated: after que